Toughening
Mostrando 1-12 de 23 artigos, teses e dissertações.
-
1. Strategies for Potential Toughening of Acrylic Denture Bases Polymerized With Microwave Energy
Resumo Aditivos de tiouretano demonstraram melhorar propriedades de polímeros em diversas aplicações. O objetivo deste estudo foi verificar o efeito da adição de oligômeros de tiouretano, monômeros de acrilamida ou baseados em funcionalidade isobornil na propriedades físicas de bases de dentadura de acrílico polimerizadas em micro-ondas. O oligômer
Braz. Dent. J.. Publicado em: 2020-09
-
2. Toughening of bio-PE upon addition of PCL and PEgAA
Abstract Researches of polymer blends based on biological and biodegradable polymers appear as a viable alternative to develop environmentally friendly materials. Therefore, the aim of this research was to produce compounds made with biological polyethylene, i.e., Biopolyethylene, Bio-PE, added to the biodegradable Polycaprolactone (PCL) and functionalized b
REM, Int. Eng. J.. Publicado em: 19/06/2019
-
3. A New Approach for Investigation of Mode II Fracture Toughness in Orthotropic Materials
Abstract Estimation of mode II fracture toughness (KIIC) in composite materials is known as a troublous and crucial problem. Dissipated values of KIIC that are reported in different fracture mechanics references is the evidence of the mentioned claim. This problem can signify the necessity of modification on common test methods and fixtures. The present stu
Lat. Am. j. solids struct.. Publicado em: 14/05/2018
-
4. Toughening of polystyrene using styrene-butadiene rubber (SBRr) waste from the shoe industry
Abstract The vulcanized rubber waste from the shoe industry causes environmental damage when it is incinerated or inappropriately discarded, turning this into a problem of major concern. Therefore, this study had as the main objective the Polystyrene (PS) toughening using different contents of white vulcanized styrene-butadiene rubber (SBRr) waste produced i
REM, Int. Eng. J.. Publicado em: 2018-04
-
5. Continuous Modeling Technique of Fiber Pullout from a Cement Matrix with Different Interface Mechanical Properties Using Finite Element Program
Abstract Fiber-matrix interface performance has a great influence on the mechanical properties of fiber reinforced composite. This influence is mainly presented during fiber pullout from the matrix. As fiber pullout process consists of fiber debonding stage and pullout stage which involve complex contact problem, numerical modeling is a best way to investiga
Lat. Am. j. solids struct.. Publicado em: 2016-10
-
6. Effect of compatibilization in situ on PA/SEBS blends
Abstract This paper presents the mechanical, thermal and rheological properties of polymer blends of polyamide 6 (PA) and styrene-butylene-styrene (SEBS) using SEBS-g-MA as a coupling agent. The increase in the interfacial interaction of PA/SEBS blends with the addition of SEBS-g-MA was observed to enhance the mechanical properties studied (excellent elongat
Polímeros. Publicado em: 16/06/2016
-
7. Zircônia tetragonal estabilizada por ítria: comportamento mecânico, adesão e longevidade clínica
A zircônia tetragonal policristalina estabilizada por ítria (Y-TZP) vem sendo amplamente empregada na Odontologia como material de infraestrutura (IE) de coroas e próteses parciais fixas devido às suas características mecânicas como alta resistência e tenacidade à fratura. O objetivo desta revisão de literatura é buscar evidências em estudos in vi
Cerâmica. Publicado em: 2013-12
-
8. Computational model of spalling and effective fibers on toughening in fiber reinforced composites at an early stage of crack formation
This work suggests a computational model that takes account of effective fibers on toughening in FRC at an early stage of crack formation. We derived the distribution of pressure provoked by a random inclined fiber in the matrix and calculated stresses through integrating the pressure and tangent stress along the fiber/matrix interface with the Kelvin's fund
Lat. Am. j. solids struct.. Publicado em: 2013-07
-
9. Development of Polyamide 6/Compound by Recycled Rubber Blends Using Graphitized Polyethylene or Polypropylene with Maleic Anhydride as Compatibilizer Agent
ABSTRACT: The toughening of polyamide 6 is desirable for many applications and may be obtained by adding a phase to the elastomeric matrix. However, this leads to a loss in its rigidity characteristics. Therefore, this study aimed at developing blends of polyamide 6/compound by recycled rubber (SBR-R), with the addition of compatibilizer graphitized polyethy
J. Aerosp. Technol. Manag.. Publicado em: 2013-06
-
10. Efeito da incorporação de fibras curtas de sílica amorfa em compósitos de polipropileno utilizados pela indústria automotiva nacional. / Effect of the incorporation of short amorphous silica fibers in polypropylene composites used by the national automotive industry.
The addition of silica fibers in polypropylene (PP) composites was investigated on this work as a proposal to develop new materials used in automotive industry, in order to enable the reduction of vehicle weight and the resulting fuel economy. The fibers are lightweight, made of amorphous silica and treated with amine silane for better interaction with the p
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 30/06/2011
-
11. Development and characterization of composite materials for production of composite risers by filament winding
Industry has been challenged to provide riser systems which are more cost effective and which can fill the technology gaps with respect to water depth, riser diameter and high temperatures left open by flexibles, steel catenary risers (SCRs) and hybrid risers. Composite materials present advantages over conventional steel risers because composite materials a
Materials Research. Publicado em: 26/08/2011
-
12. Efeito de agentes de compatibilização em blendas de PS/EPDM
This dissertation describes a study about the toughening of polystyrene with EPDM to obtain higher photooxidative properties and a good balance of impact and tensile properties in comparison to commercial HIPS. Linear triblock copolymers SEBS or SBS were used as compatibilizers to obtain better properties. PS/SBS and PS/SEBS blends were also prepared to inve
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 2011