Effect of compatibilization in situ on PA/SEBS blends
AUTOR(ES)
Carvalho, Anna Paula Azevedo de, Sirqueira, Alex da Silva
FONTE
Polímeros
DATA DE PUBLICAÇÃO
16/06/2016
RESUMO
Abstract This paper presents the mechanical, thermal and rheological properties of polymer blends of polyamide 6 (PA) and styrene-butylene-styrene (SEBS) using SEBS-g-MA as a coupling agent. The increase in the interfacial interaction of PA/SEBS blends with the addition of SEBS-g-MA was observed to enhance the mechanical properties studied (excellent elongation at break revealed by a 500% increase). Higher hardness values and a higher degree of crystallinity were obtained for compatibilized blends. In the presence of the SEBS-MA compatibilizer, the heat sweep thermograms obtained by DSC showed only one melting peak, which confirms the effect of the compatibilizer. The best rheological properties were observed for the ternary blends. The lowest concentration of SEBS-g-MA promoted the toughening of PA, and 7.5 phr of compatibilizer increased the modulus E' of the ternary blends compared to that of the binary blends. DMTA analysis allowed for the system to be characterized as partially miscible.
Documentos Relacionados
- Compatibilization of recycled polypropylene and recycled poly (ethylene terephthalate) blends with SEBS-g-MA
- A comparative study of effect of compatibilization agent on untreated and ultrasonically treated waste ground rubber tire and polyolefin blends
- Thermal & morphological evaluation of linear and radial SEBS-polypropylene blends
- Effect of Maleic Anhydride Content in Properties of PA6/AES Blends Compatibilized with MMA-MA
- Compatibilization efficiency of carboxylated nitrile rubber and epoxy pre-polymer in nitrile/acrylic rubber blends