Tig Welding
Mostrando 25-36 de 40 artigos, teses e dissertações.
-
25. Estudo exploratÃrio de parÃmetros de soldagem de revestimentos com ligas de NÃquel empregando o processo TIG com alimentaÃÃo de arame frio / Exploratory study of coating welding parameters with nickel alloys using GTAW with cold wire feeding
The aim of this work was to carry out a systematic study of GTAW welding parameters with feeding of cold wire for covering application of nickel alloys (UNS N06625, UNS N06686 and UNS N10276) in substract of steel C-Mn considering the analysis of geometric, economic and operational characteristics of layers, form to adjust these coverings for the industries
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 14/01/2009
-
26. Avaliação comparativa de propriedades geradas pelos processos de soldagem TIG e brasagem em uma liga odontológica à base de Ni-Cr / Comparative assessment of properties generated by the process of TIG welding and brazing in a Ni-Cr dental alloy
The purpose of this study was to compare, by means of microhardness testing and metallurgical characterization techniques as metallography, optical microscopy, scanning electron microscopy (SEM) and energy dispersion spectroscopy (EDS), mechanical and metallurgical properties of welded joints by TIG and brazing methods in a dental alloy based on Ni-Cr (FIT-C
Publicado em: 2009
-
27. Model to characterize susceptibility to distortions by welding in aluminum plates / Proposta de modelo para caracterizar susceptibilidade a distorção devido a soldagem em chapas de aluminio
The industry interest on having a better control in the distortions provoked by welding of aluminum plates, caused by the crescent demand of this material, motivated the development of this work. In this work, it is studied the deformation caused by TIG welding in aluminum plates, alloy Al 5052, in function of the cold working degree (tempers) on the plates
Publicado em: 2009
-
28. Fracture strength of different soldered and welded orthodontic joining configurations with and without filling material
The aim of this study was to compare the mechanical strength of different joints made by conventional brazing, TIG and laser welding with and without filling material. Five standardized joining configurations of orthodontic wire in spring hard quality were used: round, cross, 3 mm length, 9 mm length and 7 mm to orthodontic band. The joints were made by five
Journal of Applied Oral Science. Publicado em: 2008-10
-
29. Monitorização e localização de defeitos na soldagem tig através do sensoriamento infravermelho
This work presents, in an exploratory form, the use of infrared emissions of the TIG arc as a parameter for process monitoring, detection and localization of defects or discontinuity during welding. A infrared sensor was used for focalizing part of the arc and weld pool and transformed the intensity of infrared radiation presented in the surrounding regions
Publicado em: 2008
-
30. Mechanic resistance and marginal misfit of pure Ti submitted to two welding methods TIG and Laser / Resistência mecânica e desajuste marginal do titânio comercialmente puro submetido a dois métodos de soldagem: TIG e Laser
O objetivo deste trabalho foi avaliar o efeito da soldagem TIG ("tungsten inert gas") e compará-la com soldagem a laser, em hastes cilíndricas e supra-estruturas implantosuportadas, confeccionadas em titânio comercialmente puro (Ti cp) por meio dos ensaios de resistência mecânica (tração e flexão) e desajuste marginal, respectivamente. Foram confecci
Publicado em: 2008
-
31. Monitoração e localização de defeitos na soldagem TIG utilizando técnicas de espectrometria
There is an effort made by industries to improve product quality and production methods, and to decrease the production costs. Welding is one of these processes. There are several studies about controlling or monitoring the welding process. This work presents a on-line non-intrusive monitoring system capable of detecting TIG weld defects. In this way, inspec
Publicado em: 2008
-
32. Avaliação da geometria de ferramenta e parâmetros do processo FSW na soldagem da liga de alumínio AA 5052
A soldagem de ligas de alumínio sem degradação excessiva das propriedades originais do metal base apresenta-se como um obstáculo a ser superado pelas indústrias em seus processos de fabricação, uma vez que o alumínio tem sido usado cada vez de forma mais intensiva. Esforços têm sido feitos para melhorar as propriedades da união destas ligas, que q
Publicado em: 2008
-
33. AnÃlise de TensÃes Residuais em TubulaÃÃes Soldadas / Residual Stress Analysis in Welded Pipes
No atual campo industrial do paÃs, tem-se procurado, de forma freqÃente e contÃnua, a qualidade, a economia e a seguranÃa nos processos produtivos. Uma forma de conseguir isso à evitando falhas de equipamentos e componentes. TensÃes que permanecem num material, apÃs ter cessado o esforÃo externo que lhe deu origem, sÃo denominadas tensÃes residuais
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 26/02/2007
-
34. Efeito de diferentes tipos de soldagem na resistência à tração de estruturas fundidas com ligas de Ni-Cr / Effects of different types of welding on the tensile strenght of NI-Cr structures
The development of metallic prosthetic framework in oral rehabilitation, involves critical processes specially related to casting and welding. The objective of this work was to evaluate the tensile strength of cast plates (monobloc) with three different welding methods: conventional welding (torch), laser welding and TIG welding (tungsten inert gas). Eighty
Publicado em: 2007
-
35. Avaliação da resistência flexural entre diferentes métodos de soldagem: chama direta - TIG - Laser / Evaluation of the flexural strength among different welding methods: Brazing - TIG - Laser.
A técnica de soldagem apresenta vantagem de união de partes metálicas que permite melhora na adaptação e uniformidade na distribuição das forças mastigatórias, minimizando falhas no tratamento reabilitador. O objetivo foi avaliar a resistência flexural entre três métodos de soldagem diferentes: Chama Direta a maçarico, método TIG - Tungstênio
Publicado em: 2007
-
36. Estudo do efeito de fluxos na soldagem ATIG de alumínio
The feasibility of using ATIG (active flux TIG) welding for surface oxide removal in aluminum welding with direct polarity was evaluated. The influence of the flux on different conditions of specimen surface, variations in welding parameters and the effect of metal base composition was also evaluated. Welding trials were performed in a mechanized jig using a
Publicado em: 2007