Efeito de diferentes tipos de soldagem na resistência à tração de estruturas fundidas com ligas de Ni-Cr / Effects of different types of welding on the tensile strenght of NI-Cr structures
AUTOR(ES)
Romão Adalberto de Souza Mansano
DATA DE PUBLICAÇÃO
2007
RESUMO
The development of metallic prosthetic framework in oral rehabilitation, involves critical processes specially related to casting and welding. The objective of this work was to evaluate the tensile strength of cast plates (monobloc) with three different welding methods: conventional welding (torch), laser welding and TIG welding (tungsten inert gas). Eighty pre fabricated plastic patterns (twenty for each group), were welded in Ni-Cr alloy, being the control group (monobloc) jointed previously to welding. The specimens of the test group were randomly divided for posterior welding and tensile strength test, which were performed in an universal testing machine (Kratos). The mean values (Mpa) were: monobloc (control) - 785.08, laser welding - 588.42, conventional welding - 366.80 and TIG 319.78. Data were analyzed by One-way ANOVA and Tukey test (p.0.05). The control group (monobloc) presented tensile strength values statistically superior compared to all test groups. Between the welded patterns, the laser welding presented tensile strength values statistically superior compared to the other welding groups (conventional and TIG), which did not show any statistically difference between them. Therefore, it can be concluded that despite of the statistical difference between the groups, the three welding methods can be indicated by the highly satisfactory results.
ASSUNTO(S)
resistência à tração tensile strength dental alloys. ligas dentárias. welding soldagem
Documentos Relacionados
- Microdureza de ligas de Ni-Cr fundidas sob diferentes condições
- Tensile strenght of NiCr crowns cemented upon usinated titanium alloy abutments, LASER irradiated or not
- Ataque quimico para promover microrretenções na superficie de ligas metalicas dos sistemas Ni-Cr e Ni-Cr-Be
- Avaliação comparativa de propriedades geradas pelos processos de soldagem TIG e brasagem em uma liga odontológica à base de Ni-Cr
- Determinação da microdureza Vickers e caracterização microestrutural das ligas de NiCr, NiCrBe, NiCrTi fundidas sob diferentes condições de fundição com reaproveitamento total ou parcial de liga