Thermal Evaporation
Mostrando 1-12 de 65 artigos, teses e dissertações.
-
1. Design of Three-Layer Antireflection Coating for High Reflection Index Lead Chalcogenide
Antireflection coatings (ARC), not only reduce the reflection of the incident radiation but also protect the surface from environmental degradations. In present study, three- layer design was theoretically calculated and experimentally realized on the surface of lead chalcogenide, which had high refractive characteristics. First the theoretical designs of th
Mat. Res.. Publicado em: 11/11/2019
-
2. Commitment Between Roughness and Crystallite Size in the Vanadium Oxide Thin Film opto-electrochemical Properties
The V2O5 thin films has been widely studied because it has application as ionic host in electrochromic and lithium-ion batteries, two technologies that have an intimate connection with sustainability as substitutes for fossil energies and as agents for improving energy efficiency. In electrochromic technology, V2O5 is applied as a passive electrode due to it
Mat. Res.. Publicado em: 01/11/2018
-
3. Thermal profiles in pervious concrete during summer rain simulations
ABSTRACT Pervious concrete pavement systems may have many environmental benefits including the mitigation of heat island impacts. This mitigation is a complex combination of pervious concrete’s insulating capability and its ability to store water which may provide evaporative cooling. However, the introduction of water may also bring heat into the system,
Matéria (Rio J.). Publicado em: 18/10/2018
-
4. Fibrous PCL/PLLA Scaffolds Obtained by Rotary Jet Spinning and Electrospinning
Rotary jet spinning (RJS) and electrospinning are techniques to obtain fibrous scaffolds. RJS is a simple method, which fabricates three-dimensional fibers by exploiting a high-speed rotating nozzle, creating a polymer jet which stretches until solidification, and does not require high voltage. In opposite, electrospinning technique needs the presence of an
Mat. Res.. Publicado em: 15/03/2018
-
5. Microstructure and thermal and functional properties of biodegradable films produced using zein
Abstract Research is being conducted in an attempt to produce biodegradable packaging to replace plastic products, thereby reducing solid waste disposal. In this work, zein films were produced from vegetable oils (macadamia, olive and buriti) and from pure oleic acid. The surface of zein-based films made using oleic acid has a good lipid distribution. The h
Polímeros. Publicado em: 15/03/2018
-
6. ITO Obtained by Spray Pyrolysis and Coating on Glass Substrate
Conductive thin films have various applications in different technological fields. Indium tin oxide (ITO) is a mixed oxide. In the film form, ITO has been widely employed as electrode in many optoelectronic devices. Methods like thermal evaporation, sputtering, chemical vapor deposition (CVD), electron beam, spray coating, and sol-gel synthesis give ITO thin
J. Braz. Chem. Soc.. Publicado em: 2017-12
-
7. Development and Validation of a Stability-Indicating Method for Perillyl Alcohol Incorporated in Poly(lactide-co-glycolide) Nanoparticles and Stress Degradation Studies
Perillyl alcohol has been studied in the treatment of cancer disease. However, its high toxicity is a drawback, which can be overcome by its incorporation in nanostructured systems. The aim of this work was to develop and validate a chromatographic method for determination of perillyl alcohol encapsulation efficiency in a polymeric nanoparticles formulation
J. Braz. Chem. Soc.. Publicado em: 2017-12
-
8. Development and Characterization of Synthetic Chalcones-Loaded Eudragit RS 100 Microparticles for Oral Delivery
Eudragit® RS100 microspheres of two chalcones were prepared by solvent evaporation technique. A simple and rapid high-performance liquid chromatography (HPLC) method was developed and validated to determine the encapsulation efficiency, drug loading and release profiles of these chalcones in a microparticulate system. The mean EE values for the two chalcone
J. Braz. Chem. Soc.. Publicado em: 2017-06
-
9. Physical Vapor Deposited Films of a Perylene Derivative: Supramolecular Arrangement and Thermal Stability
The analysis of supramolecular arrangement is essential to understand the role of this key factor on the optical and electrical properties of organic thin films. In this work, thin solid films of bis(phenethylimido) perylene (PhPTCD) fabricated using physical vapor deposition (PVD) technique (thermal evaporation), deposited simultaneously onto different subs
Mat. Res.. Publicado em: 23/03/2017
-
10. A novel approach in mucoadhesive drug delivery system to improve zidovudine intestinal permeability
ABSTRACT Zidovudine (AZT) mucoadhesive solid dispersions (SD) were prepared using a sodium starch glycolate (SSG) and hypromellose phthalate (HPMCP) mixtures as carrier to enhance the intestinal permeability and bioavailability of zidovudine. SDs were prepared using the co-precipitation method followed by solvent evaporation and characterized according to th
Braz. J. Pharm. Sci.. Publicado em: 2016-12
-
11. Studies on Growth, Spectral, Thermal, Mechanical and Optical Properties of 4-Bromoanilinium 4-Methylbenzenesulfonate Crystal: A Third Order Nonlinear Optical Material
Abstract 4-Bromoanilinium 4-methylbenzenesulfonate (4BPTS) single crystal was successfully grown from ethanol by slow evaporation method at room temperature. The structure of grown crystal was confirmed by single crystal X-ray diffraction studies. The presence of functional groups of grown crystal was confirmed by the Fourier transform infrared spectroscopy
Mat. Res.. Publicado em: 18/07/2016
-
12. The effect of andiroba oil and chitosan concentration on the physical properties of chitosan emulsion film
Abstract Chitosan film is used as a dressing to heal burns. The physical and biological properties of the film can be modified by the addition of phytotherapic compounds. This work used the casting -solvent evaporation technique to prepare chitosan film containing andiroba oil (Carapa guianensis) which has anti-inflammatory, antibiotic, and healing propertie
Polímeros. Publicado em: 14/06/2016