Svet
Mostrando 1-12 de 13 artigos, teses e dissertações.
-
1. COMPREENDENDO OS MECANISMOS DE CORROSÃO DE LIGAS DE AL-CU-LI: UMA INVESTIGAÇÃO ATRAVÉS DE TÉCNICAS ELETROQUÍMICAS GLOBAIS E LOCAIS
In this study, the corrosion mechanism of an Al-Cu-Li alloy manufactured by two different treatment routes (T3 and T851) was evaluated by immersion and electrochemical tests in solutions containing chloride ions (Cl-). For both alloys, the formation of cavities on the surface was associated with micrometer-sized intermetallics (IM’s), however, in addition
Química Nova. Publicado em: 2022
-
2. PMMA-SiO2 Organic-Inorganic Hybrid Coating Application to Ti-6Al-4V Alloy Prepared through the Sol-Gel Method
Siloxane-poly(methyl methacrylate) (PMMA) hybrid was synthesized based on the sol-gel method and applied to Ti-6Al-4V through dip-coating. The structural feature of the hybrid was subjected to Fourier-transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TG); its morphological properties were analyzed through scanning electron microscope (SE
J. Braz. Chem. Soc.. Publicado em: 2020-02
-
3. Avaliação da resistência à corrosão do filme de silanoviniltrimetoxisilano modificado com íons Ce (III) e Ce (IV) como pré-tratamento do aço carbono
RESUMO Silanos são compostos organo funcionais utilizados como agentes de acoplamentos entre interfaces orgânicoinorgânicas, com boas propriedades de adesão. Por esta razão, o uso de silanos como pré-tratamento para aços, vem ganhando espaço já que também são geradores de resíduos de menor toxidade ao meio ambiente e à saúde humana. Para melhor
Matéria (Rio J.). Publicado em: 16/09/2019
-
4. On the Global and Localised Corrosion Behaviour of the AA2524-T3 Aluminium Alloy Used as Aircraft Fuselage Skin
The aim of this work was to study the corrosion process of new aluminium alloy AA2524-T3 (Solution Heat Treated and Cold Worked), which is a promising substitute of the base line AA2024-T3 for aircrafts fabrication, by global and localised techniques in sodium chloride medium (0.05 mol L-1 NaCl). The open circuit potential results revealed a stochastic evolu
Mat. Res.. Publicado em: 14/01/2019
-
5. Evaluation of Castor Bark Powder as a Corrosion Inhibitor for Carbon Steel in Acidic Media
The inhibition effect of castor bark powder obtained from Ricinus communis on AISI 1020 carbon steel in acidic media (HCl 0.5 mol.L-1) has been studied by electrochemical impedance spectroscopy (EIS), polarization curves, scanning vibrating electrode technique (SVET) and weight loss measurements. Fourier transform infrared spectroscopy (FTIR) and scanning el
Mat. Res.. Publicado em: 30/10/2017
-
6. Corrosion Mechanism Suggested Based on Electrochemical Analysis and SVET for Uncoated Tinplate and Post Coated With a Hybrid Film
The tinplate, used in the packaging sector and formed from a metal substrate, comprises a steel base which has undergone a surface treatment to produce a thin layer of FeSn2, a tin layer and an oxide tin layer. Currently, packaging using surface treatment is based on the use of chromates because these metals provide an excellent corrosion resistance. Nontoxi
Mat. Res.. Publicado em: 09/10/2017
-
7. Visualisation of the Galvanic Effects at Welds on Carbon Steel
Non-destructive classical techniques, such as electrochemical impedance spectroscopy (EIS) and open circuit potential (OCP) measurement, were complemented with advanced techniques, including the scanning vibrating electrode technique (SVET) and localised electrochemical impedance spectroscopy (LEIS) to examine galvanic effects at welds on carbon steel. The c
J. Braz. Chem. Soc.. Publicado em: 2015-04
-
8. Estudo da corrosão e corrosão-fadiga em ligas de Al e Al - Li de alta resistência para aplicação aeronáutica / Study behaviour of corrosion and corrosion fatigue in high strength Al and Al - Li alloys for aeronautic application
The aircraft industry is constantly looking for improved materials which offer benefits in terms of performance, weight and cost savings. Corrosion and fatigue of aluminium alloys are major issues in the service life assessment of aircraft structures and in the management of aging air fleets. The aim of this study was to evaluate the corrosion and corrosion
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 03/09/2012
-
9. Efeito da marcação na resistência à corrosão de implantes ortopédicos produzidos em aço inoxidável ABNT NBR ISO 5832-1 / Effect of marking process on the corrosion resistance of orthopedic implants produced on ISO 5832-1 stainless steel
Dentre as principais propriedades que devem ter os implantes ortopédicos, tem-se a resistência à corrosão. Os implantes passam por um processo de marcação antes de serem esterilizados, cuja função é prover a identificação e rastreabilidade do produto. Este trabalho teve o objetivo de avaliar o efeito de duas técnicas de marcação, mecânica e a
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 15/08/2012
-
10. Estudos de interfases eletroquímicas envolvendo aço-carbono, aço galvanizado e zinco em meios eletrolíticos, na ausência e presença de benzotriazol / Electrochemical interphases studies involving carbon steel, galvanized steel and zinc in electrolytic media, in the absence and presence of benzotriazole
O comportamento eletroquímico do aço-carbono 1005, do aço galvanizado e do zinco foi estudado em meios aerados de ácido sulfúrico 0,5 mol.L-1 (aço-carbono) e cloreto de sódio 0,01 mol.L-1 na ausência e presença do inibidor de corrosão benzotriazol (BTAH), a 25 ºC. Foram empregadas como técnicas ensaios gravimétricos, medidas de transitórios de
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 18/11/2010
-
11. Estudo do comportamento de corrosão dos intermetálicos presentes na liga AA 2024-T3, por meio de técnicas de microscopia associada a técnicas eletroquímicas / INVESTIGATION ON THE CORROSION BEHAVIOUR OF THE INTERMETALLICS IN THE AA 2024-T3 ALLOY BY MICROSCOPY ASSOCIATED TO ELECTROCHEMICAL TECHNIQUES.
The AA2024-T3 aluminium alloy is largely used in the aerospace industry. It has high mechanical properties due to the presence of alloying elements, mainly copper, that form finely distributed precipitates coherent with the matrix, during controlled aging treatment. However, during this process, large intermetallics (IMs) are also formed with composition and
Publicado em: 2008
-
12. CORROSION OF ADVANCED STAINLESS STEEL IN PHYSIOLOGICAL SOLUTIONS / Corrosão de aços inoxidáveis avançados em meios fisiológicos
The main objective of this study was to determine the corrosion behavior of advanced stainless steels (SS) in physiological solutions to evaluate their potential for use as biomaterials. Four stainless steels were tested: a superferritic stainless steel (DIN W. Nr. 1.4575), Incoloy MA 956, containing aluminum and yttrium oxide, an austenitic stainless steel
Publicado em: 2008