Structural Ceramics
Mostrando 1-12 de 67 artigos, teses e dissertações.
-
1. Properties and technical characteristics of Casira pottery, Jujuy, Argentina
Abstract In this work, the results of a multi-technique characterization of a type of pottery production with high cultural and economic relevance from the only potter town in Argentina are presented and correlated. Raw materials, a prepared paste, and ceramic samples were studied. Chemical, structural, textural, microstructural, and thermal features were as
Cerâmica. Publicado em: 2022
-
2. Cold sintering and electric characterization of ZnO-BaTiO3 composites
Abstract The sintering is an essential step in the processing of ceramics materials. A number of researchers have reported new techniques for sintering. However, in general, the process still demands high temperatures. This paper reports the results of the cold sintering of ZnO-BaTiO3 composites. The microstructural, structural, and electric properties of th
Cerâmica. Publicado em: 2021-03
-
3. Study of Structural and Electric Properties of the PZT 52/48 Doped With Er+3
The scientific community has shown a growing interest in relating to the ferroelectric materials and it has made an effort to develop them. Among these several ferroelectric materials, we proposed to investigated Pb(ZrTi)O3 doped with distinct Er+3 concentrations. Our aim was to investigate how the erbium affects the PZT electrical properties. To determine t
Mat. Res.. Publicado em: 25/11/2019
-
4. Characterization of Li2O-Al2O3-SiO2 glass-ceramics produced from a Brazilian spodumene concentrate
Resumo Vitrocerâmicas do sistema LAS (Li2O-Al2O3-SiO2) com elevada resistência ao choque térmico foram obtidas com sucesso com o uso de um concentrado de espodumênio brasileiro como principal matéria-prima (80%-70% em massa). Duas composições (Li2O.Al2O3.nSiO2) foram produzidas com n= 2 e 4, próximas às composições estequiométricas das fases eucr
Cerâmica. Publicado em: 15/08/2019
-
5. Síntese, caracterização e modificação da hidroxiapatita com zinco para aplicação na reação de esterificação
RESUMO A hidroxiapatita tem se destacado entre os materiais cerâmicos devido a sua versatilidade estrutural, pois permite a substituição do Ca2+ ou do PO43-da sua estrutura possibilitando diversas aplicações. A utilização da hidroxiapatita como suporte e, ou catalisador tem recebido destaque como tema de pesquisa. Com isso, o objetivo deste trabalho f
Matéria (Rio J.). Publicado em: 20/05/2019
-
6. Production of Ba2AlNbO6 Ceramics and Study of their Stability in Crude Petroleum for the Conservation of Metallic Sensing Elements Used in Petroleum Extraction
In the present work niobium based complex cubic perovskite oxide Ba2AlNbO6 ceramics were produced, characterized and their stability in crude petroleum environment was studied for inert ceramic embedding used in petroleum extraction. Ba2AlNbO6 ceramic powder was prepared by means of thermo-mechanical processing. Structural characteristics of calcined materia
Mat. Res.. Publicado em: 26/07/2018
-
7. Crystallization of Anatase TiO2 in Niobium Potassium Phosphate Glasses
In this work, the glass forming ability was studied in potassium phosphate glasses with increasing amounts of TiO2 in order to obtain a glass-ceramic with photocatalytic properties. The first studied series has been the binary system (100-x) KPO3-xTiO2. Homogeneous and transparent glasses could be obtained with x varying from 10 to 30 mole%. Since the photoc
Mat. Res.. Publicado em: 16/02/2017
-
8. Calcined Clay Lightweight Ceramics Made with Wood Sawdust and Sodium Silicate
This paper aims to study the influence of including wood sawdust and sodium silicate in the production process of calcined clay lightweight ceramics. In the production process first, a sample used by a company that produces ceramic products in Brazil was collected. The sample was analysed by techniques of liquidity (LL) and plasticity (LP) limits, particle s
Mat. Res.. Publicado em: 17/10/2016
-
9. Impedance and Modulus Spectroscopy Characterization of Tb modified Bi0.8A0.1Pb0.1Fe0.9Ti0.1O3 Ceramics
In this paper we present the impedance spectroscopy of ternary solid solutions of BiFeO3, TbFeO3 and PbTiO3, prepared by solid-state reaction method. The preliminary structural studies were carried out by x-ray diffraction technique, showing the formation of polycrystalline sample with ABO3 type of perovskite structure with hexagonal symmetry for Bi0.8Tb0.1P
Mat. Res.. Publicado em: 16/02/2016
-
10. Effect of magnetic ion doping on structural, electric and relaxor properties of Pb (Fe2/3W1/3) O3 multiferroic ceramics
Single-phase Pb(Fe2/3W1/3)O3 (PFW) multiferroic ceramics doped with magnetic ions were fabricated using a modified B-site precursor method. Dielectric response was investigated over a wide range of temperature and frequency. Doping did not modify the characteristic temperatures (T C, T N) and the order at ferroelectric phase transition, keeping the relaxor p
Mat. Res.. Publicado em: 2014-12
-
11. Structural and fluid dynamic characterization of calcium carbonate-based porous ceramics
The aim of this work was to experimentally evaluate the use of calcium carbonate as a pore-generating agent in ceramic compositions. Compositions that contained 50% kaolin, 20% limestone, and different concentrations of quartz and feldspar were prepared by uniaxial pressing. Samples were heat-treated at a heating rate appropriate to induce calcium carbonate
Mat. Res.. Publicado em: 10/09/2013
-
12. Preparation and characterization of PbTi0(3) ceramics modified by a natural mixture of rare earth oxides of xenotime
Lead titanate ceramics modified by xenotime (Xm) with nominal composition (Pb, Xm)TiO3, Xm 10 or 15 mol %, were prepared by the conventional oxide mixture technique. Xenotime is a natural mineral consisting of a mixture of rare earth oxides. Thermal, structural and electric properties were investigated through differential and gravimetric thermal analysis, X
Mat. Res.. Publicado em: 23/08/2013