Strain And Stresses
Mostrando 1-12 de 187 artigos, teses e dissertações.
-
1. Writing papers with an emphasis on structural geology and tectonics: advices and warnings
Abstract The objective of this short paper was to provide some advice on how to write a geoscience paper of international standard and to warn against some common pitfalls. It is focused on how to structure a paper and stresses the importance of building its contents around a well-defined problem. Furthermore, the importance of moving away from outdated and
Braz. J. Geol.. Publicado em: 13/01/2020
-
2. Stress, strain, and pregnancy outcome in postpartum cows
Abstract Stress affects the productivity and fertility of cattle. Stress causes strain and individual animals experience different amounts of strain in response to the same amount of stress. The amount of strain determines the impact of stress on fertility. Typical stresses experienced by cattle include environmental, disease, production, nutritional, and ps
Anim. Reprod.. Publicado em: 28/11/2019
-
3. Numerical implementation of a micromechanics-based viscoelastic model for geomaterials with isotropically distributed micro-fractures
Abstract The constitutive behavior of geomaterials is generally affected by the presence at different scales of discontinuity surfaces with different sizes and orientations. According to their mechanical behavior, such discontinuities can be distinguished as cracks or fractures. Fractures are interfaces that can transfer normal and tangential stresses, where
Lat. Am. j. solids struct.. Publicado em: 25/11/2019
-
4. Numerical modeling of circular, square and rectangular concrete columns wrapped with FRP under concentric and eccentric load
Resumo Neste artigo é apresentada a modelagem numérica em elementos finitos de pilares com seções transversais circular, quadrada e retangular solicitados por força centrada e excêntrica, reforçados com PRF. O modelo numérico foi calibrado com os resultados experimentais e indicou boa compatibilidade de forças axiais, deformações axiais e deforma�
Rev. IBRACON Estrut. Mater.. Publicado em: 18/07/2019
-
5. Effect of cold-working process on cyclic deformation of electrolytic copper
Abstract Cyclic softening and hardening processes are expressed by the change in the stress amplitude necessary to cause a given strain amplitude. Understanding the cyclic stress-strain behavior of materials is an important step in the complex study of their fatigue behavior. The potential differences between the defect structures of cold-formed materials ma
REM, Int. Eng. J.. Publicado em: 19/06/2019
-
6. Experimental studies of short concrete reinforced steel fiber beams under bending
Resumo Este estudo apresenta os resultados do rompimento de dois grupos de vigas de concreto com fibras de aço. Cada grupo foi composto de 4 vigas com vão de 300 mm, 4 com vão de 500 mm e 4 com vão de 800 mm e seção de 15 cm x 15 cm. A variação dos grupos se deu pela quantidade de fibras (I com 40 kg/m³ e II com 60 kg/m³). Foram avaliados o comport
Rev. IBRACON Estrut. Mater.. Publicado em: 20/05/2019
-
7. Influence of the Micromechanics Models and Volume Fraction Distribution on the Overall Behavior of SiC/Al Functionally Graded Pressurized Cylinders
Abstract The assessment of the differences in results obtained from various micromechanics homogenization schemes, as well as the implications of assuming different volume fraction profiles was carried out in the present work. The functionally graded composite chosen for the analysis was Al-SiC and comparisons were made in terms of stress and strain distribu
Lat. Am. j. solids struct.. Publicado em: 08/04/2019
-
8. Morse taper performance: A finite element analysis study
OBJECTIVES: To evaluate and compare the magnitude and distribution of stresses generated on implants, abutments and first molar metal-ceramic crowns using finite element analysis. METHODS: Preliminary three-dimensional models were created using the computer-aided design software SolidWorks. Stress and strain values were observed for two distinct virtual mo
Clinics. Publicado em: 25/03/2019
-
9. Isolation and Identification of a Potential Amylolytic Probiotic Bacterium from the Gut of Jundiá Catfish, Rhamdia quelen.
ABSTRACT This study aimed to isolate a potential probiotic amylolytic strain from the gut of jundiá catfish to improve carbohydrate digestibility in fish. Two of 31 strains isolated from the foregut of Rhamdia quelen were able to grow on starch-agar medium and were considered amylolytic. The strain that presented higher amylolytic potential, based on a qual
Braz. arch. biol. technol.. Publicado em: 29/11/2018
-
10. Numerical stress-life curves for the AISI 4340 steel using two sets of materials properties and different bi-axial stress ratios
Abstract Fatigue assessments by the more robust strain-based approach demand the determination of the local strain history from nominal stresses. For notched members, a cyclic constitutive relation, the stress concentration factor (SCF) and a strain concentration rule are used with this aim in some approximate solutions. The plastic part of the cyclic consti
Lat. Am. j. solids struct.. Publicado em: 29/10/2018
-
11. Numerical and experimental investigation of forming limit diagrams of 6063 aluminum alloy sheets using Ayada ductile fracture criterion and the second derivative of large strain criterion at increased temperatures
Abstract The present study investigated the forming limit diagrams (FLDs) of aluminum alloy 6063 sheets using numerical and experimental methods at increased temperatures. In the numerical section, for the first time, the Ayada ductile fracture criterion and the second derivative of the large strain criterion were used. ABAQUS finite element (FE) analysis so
Lat. Am. j. solids struct.. Publicado em: 17/09/2018
-
12. Ruido magnético Barkhausen para el estudio de la anisotropía magnética en aceros inoxidables
ABSTRACT The magnetic Barkhausen noise (MBN) is a phenomenon that occurs in ferromagnetic materials when they are exposed to slowly varying magnetic fields, generating discrete jumps in their magnetization. These jumps are produced by the movement of the magnetic domain walls. They can be detected by a small coil allocated on the sample surface. The movement
Matéria (Rio J.). Publicado em: 19/07/2018