Phase Diagrams
Mostrando 1-12 de 151 artigos, teses e dissertações.
-
1. Separation of gadolinium and europium from chloride media by the solvent extraction technique
Abstract Obtaining rare earth elements (REE) is a complicated task, due mainly to the difficulty of separating and purifying them. Solvent extraction is the most widely used technique for separating REE, and the most common extractants used are organophosphorus acids. The low selectivity of this technique leads to the need for a high number of extraction cel
REM, Int. Eng. J.. Publicado em: 2020-03
-
2. DEEP EUTECTIC SOLVENTS BASED ON BETAINE AND PROPYLENE GLYCOL AS POTENTIAL DENITRIFICATION AGENTS: A LIQUID-LIQUID EQUILIBRIUM STUDY
Abstract Two deep eutectic solvents (DES) based on betaine (B) and propylene glycol (PG) in molar ratios of 1:4 and 1:5 were prepared and their physico-chemical properties were determined. Liquid-liquid equilibria at 298.15 K and atmospheric pressure were determined for 13 quasi-three-component systems with a hydrocarbon (n-hexane, n-heptane, i-octane or tol
Braz. J. Chem. Eng.. Publicado em: 13/01/2020
-
3. SYNTHESIS, CHARACTERIZATION, ADSORPTION AND THERMODYNAMIC STUDIES OF PURE AND BINARY CO2-N2 MIXTURES ON OXYGEN ENRICHED NANOSTRUCTURED CARBON ADSORBENTS
Abstract Oxygen enriched porous carbons have been synthesized by a nanocasting technique using mesoporous zeolite as template and epoxy resin as precursor. Characterization results show the effect of the nanocasting technique on the development of heterogeneous surface, high basicity, and high surface area of 686.37 m2g-1, beneficial for CO2 adsorption. Pure
Braz. J. Chem. Eng.. Publicado em: 09/12/2019
-
4. Development, characterization and stability of microemulsionated formulations of bacaba, Oenocarpus bacaba oil
RESUMO Os avanços no âmbito da nanotecnologia, aliados ao uso de produtos naturais, representam uma área promissora de pesquisa. O Brasil é um país de rica biodiversidade, especialmente na floresta amazônica. Frutos utilizados comumente nas comunidades locais, como a bacaba (Oenocarpus bacaba), são potencialmente interessantes para prospecção de apl
Acta Amaz.. Publicado em: 12/08/2019
-
5. Effect of the Chemical Homogeneity of a Quenched and Tempered C-Mn Steel Pipe on the Mechanical Properties and Phase Transformations
Seamless steel pipes for application in the oil and gas industries are manufactured from quenched and tempered steel. Aiming to meet the required characteristics, it is necessary that the microstructure and the mechanical properties are homogeneous along the wall thickness of the pipes, which is even more critical for thick wall pipes. Considering the seamle
Mat. Res.. Publicado em: 03/06/2019
-
6. Simulação termodinâmica computacional de liga modelo de aço super ferrítico contendo 0,07% de boro
RESUMO Aços inoxidáveis super ferríticos são utilizados em equipamentos como trocadores de calor e torres de destilação que operam em condições extremas de temperatura, pressão e em ambientes contendo altas concentrações de cloretos, H2S e CO2, encontradas nas novas áreas de exploração de petróleo e gás na costa brasileira. Uma liga super fer
Matéria (Rio J.). Publicado em: 20/05/2019
-
7. Diagrama de fases experimental Fe-Sn-Zr. Nuevos resultados del corte isotérmico de 800 °C
ABSTRACT The Zr-based alloys are extensively applied in the field of nuclear technology. Alloyed with Sn and Fe, Zr is the main element in the zircaloy-type alloys, currently vastly used as structural elements and as containers of burnable elements in nuclear reactors. This ternary metallurgical system is also a component of more recently developed alloys su
Matéria (Rio J.). Publicado em: 19/07/2018
-
8. Efecto de la sustitución de V por Ti sobre las temperaturas de transformación de fase y el desajuste de red matriz/precipitado en la superaleación 76Fe-12Al-12V
ABSTRACT Fe-Al based alloys have a remarkable potential for high temperature structural applications, provided that the limitation of their low creep resistance is solved. Third element addition (Nb, Ti, Zr or Ta) has proven to per-form the task, at the expense of a low ductility. In previous works we have investigated ferritic alloys in the Fe-Al-V system w
Matéria (Rio J.). Publicado em: 19/07/2018
-
9. Development of self-nanoemulsifying tablet (SNET) for bioavailability enhancement of sertraline
Abstract The purpose of the study was to combine the advantages of self-nanoemulsifying drug delivery systems and tablets as a conventional dosage form. Self-nanoemulsifying drug delivery system (SNEDDS) was prepared to enhance the solubility and thus oral bioavailability of sertraline. Aqueous titration method was used to prepare the liquid SNEDDS; ternary
Braz. J. Pharm. Sci.. Publicado em: 07/06/2018
-
10. Characterization of Impact Toughness Properties of DIN39MnCrB6-2 Steel Grade
Boron added steels in quenched and tempered condition have been widely used in applications where good mechanical properties and low cost are required. In this study, impact resistance of DIN 39MnCrB6-2 steel grade was investigated due to its criticality in automotive components. Metastable phase diagrams were built to guide heat treatments. The influence he
Mat. Res.. Publicado em: 04/12/2017
-
11. MICROEMULSION OF BRAZIL NUT OIL AS A NATURAL PRODUCT TO IMPROVE SUPEROXIDE RELEASE IN HUMAN PHAGOCYTES
The aim of this study was to develop and characterize a Brazil nut oil microemulsion system and determine the effect of this microemulsion on the superoxide release in human phagocytes. The microemulsion was formulated using distilled water, Brazil nut as the oily phase, Sorbitan monooleate, Polysorbate 80, and butan-1-ol. Hydrophile-lipophile balance of Bra
Quím. Nova. Publicado em: 2017-09
-
12. Assessment of the Ti-rich corner of the Ti-Si phase diagram using two sublattices to describe the Ti5Si3 phase
Abstract The thermodynamic optimization of Ti-X-Si systems requires that their respective binary systems be constantly updated. The most recent assessments of the Ti-Si phase diagrams used three sublattices to describe the Ti5Si3 phase. The stable version of this phase diagram indicated the presence of Ti(β)+Ti5Si3→Ti3Si and Ti(β)→Ti(α)+Ti3Si reaction
REM, Int. Eng. J.. Publicado em: 2017-06