Non Destructive Tests
Mostrando 1-12 de 37 artigos, teses e dissertações.
-
1. Proposal of a method for service life prediction of a concrete structure: a case study
Abstract This article presents a method for service life prediction of concrete structures. The proposed method aims to estimate the performance of a concrete structure through its permeability to carbon dioxide penetration, in order to verify its accordance to Brazilian standards. This case study is based on an inspection made in an educational building in
REM, Int. Eng. J.. Publicado em: 2020-09
-
2. INFLUENCE OF FATIGUE ON BENDING OF Pinus caribaea WOOD
ABSTRACT This research aimed to evaluate the effect of the number of fatigue cycles (NC, 0 – reference, 450, 4500, 45000, and 90000) for frequencies (Fr) of oscillation equal to 0.5 and 1.0 Hz on the modulus of elasticity (Em) and operating stress (σm) in the static bending of Pinus caribaea wood. Em and σm were determined taking into account three speci
Eng. Agríc.. Publicado em: 2020-04
-
3. STUDYING THE GRAMMAGE IN LVL PANELS GLUED WITH CASTOR OIL-BASED POLYURETHANE ADHESIVE: A POSSIBLE ALTERNATIVE TO FORMALDEHYDE RELEASING ADHESIVES.
ABSTRACT Efforts have been done in order to decrease the human dependence on petroleum materials. This idea can be applied for wood adhesives and wood products. This study proposes to evaluate laminated veneer lumber (LVL) panels of Hevea brasiliensis produced with castor oil-based polyurethane and resorcinol formaldehyde in different grammages. Six rubber t
CERNE. Publicado em: 2020-03
-
4. BIOMECHANICS OF BONE BLOCK GRAFT MODELS OF DIFFERENT GEOMETRY
RESUMO Objetivo: Avaliar o comportamento mecânico de enxertos ósseos em blocos com geometrias diferentes usando modelos de madeira. Métodos: Montagens com “enxertos” de perfil retangular (G1) e trapezoidal (G2), fixadas com placas de compressão dinâmica de 3,5 mm e oito orifícios, foram submetidas a ensaios não destrutivos de flexão, com a carg
Acta ortop. bras.. Publicado em: 30/05/2019
-
5. DISPLACEMENT MEASUREMENT IN SAWN WOOD AND WOOD PANEL BEAMS USING PARTICLE IMAGE VELOCIMETRY
ABSTRACT Throughout their useful life structures demand monitoring to verify their conditions of use. Thus, the need arises to seek methodologies capable to evaluate displacements and deformations in structural components of buildings. The objective of this research was to evaluate the use of the particle image velocimetry (PIV) technique to analyze test spe
CERNE. Publicado em: 20/05/2019
-
6. Schizolobium Parahyba var. Amazonicum Glulam Classified by Non-destructive Tests
ABSTRACT The objectives of this study were to evaluate the relationship between the density and the EW (modulus of elasticity) values obtained by two non-destructive methods: the accuracy of an expeditious method using a graduated ruler; and the homogenization of elasticity between the methods for glulam elements. In the analysis, displacements were measure
Floresta Ambient.. Publicado em: 08/04/2019
-
7. Evaluation of reinforced concrete structural durability in the post-occupation phase - A case study in Novo Hamburgo/RS
Abstract Researches on building performance have been developed over time. The Brazilian Performance Standard - NBR 15575 - deals with the issues of durability applied to residential buildings, establishing criteria and parameters to classify the systems into minimum, intermediate and higher performance levels. In relation to the service life, studies are al
REM, Int. Eng. J.. Publicado em: 2019-03
-
8. Análisis de la forma de onda de señales de Emisión Acústica producida en ensayos de interfaces ceramo-metálicas
ABSTRACT The study of ceramic-metal interface is of special importance in odontology area by the current demand about dental prostheses, so it is very important to be more and more similar to natural teeth and with a long service life. With the aim of assessing in detail the behavior of ceramic-metal interface used in dental restorations systems, in this wor
Matéria (Rio J.). Publicado em: 19/07/2018
-
9. Non-resonant Permittivity Measurement Methods
Abstract The measurement of the dielectric properties of materials has been applied in non-destructive tests, humidity measurement, soil analysis and even cancer detection. The methods have been developed for over 70 years based on the interaction of the electromagnetic waves with the material under test. This work presents a general model of scattering para
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2017-03
-
10. Caracterización de semielaborados de aleaciones de titanio procesadas por extrusión y laminación perforación (proceso Mannesmann)
ABSTRACTFor the manufacture of seamless pipes and tubes are used, as raw materials, hollow bars from hot deformation processes like extrusion and rotary tube piercing (Mannesmann process). Starting from these semi-elaborated products and by means of successive cross sections reductions through tube drawing or tube rolling (cold pilgering) the requested final
Matéria (Rio J.). Publicado em: 2015-09
-
11. Maps of deformations in a cantilever beam using particle image velocimetry (PIV) and speckle patterns
PIV (particle image velocimetry) has been spreading in studies that use the movement of particles to monitor the displacement of an object or the flow of a fluid by means of velocity vectors using optical techniques and second order statistics. PIV is also known as laser speckle velocimetry when associated with speckle patterns. This technique has been used
Rem: Rev. Esc. Minas. Publicado em: 2015-09
-
12. Estimation of leaf area in coffee leaves (Coffea arabica L.) of the Castillo® variety
Allometric models based on measurements of single leaf dimensions or a combination there are useful tools for determining individual leaf area (LA) because they are non-destructive, precise, simple and economical methods. The present study was carried out at the Central Station Naranjal of Cenicafé, located in the Department of Caldas (Colombia), four model
Bragantia. Publicado em: 11/08/2015