Inverters
Mostrando 13-24 de 42 artigos, teses e dissertações.
-
13. Projeto de filtros para atenuação de correntes de modo comum e de sobretensões em acionamentos de motores elétricos utilizando inversores PWM
The use of inverters in most of electrical motor drives applications has been accompanie by several undesirable effects, such as overvoltage at the motor terminals, circulation of common mode currents and electromagnetic interference problems. The determining factors for most of these problems come with the high switching speed and frequency of the semicondu
Publicado em: 2010
-
14. Conversor eletrônico de potência trifásico para sistema fotovoltaico conectado à rede elétrica / Three-phase power converter for grid-connected photovoltaic system
Este trabalho é uma contribuição ao estudo de conversores eletrônicos para sistemas fotovoltaicos de geração distribuída de energia elétrica. O objetivo principal é apresentar o desenvolvimento e os resultados de um conversor eletrônico trifásico para a conexão de um conjunto de painéis solares fotovoltaicos à rede elétrica de baixa tensão. S
Publicado em: 2010
-
15. Controlador Fuzzy aplicado a um sistema de controle de posição acionador por motores de indução trifásicos / Fuzzy controller applied to a position control system powered by tree-phases induction motors.
This work presents the project of fuzzy controllers for a X-Y coordinate table with two degrees of freedom. Both bases of the table moves horizontally, powered by tree-phases induction motors operated by frequency inverts. For detection position of bases, optical encoders were engaged to the axes of the engines to be obtained the angular displacement. A data
Publicado em: 2010
-
16. ESTUDO E COMPARAÇÃO DE SISTEMAS DE ACIONAMENTO PARA APLICAÇÕES DE ALTA POTÊNCIA E MÉDIA TENSÃO / STUDY AND COMPARISON OF DRIVE SYSTEMS FOR HIGH POWER AND MEDIUM VOLTAGE APPLICATIONS
Esta Tese de Doutorado propõe a comparação de técnicas de modulação, tecnologias de dispositivos semicondutores e topologias de inversores multiníveis, para realizar o apontamento do sistema de acionamento de média tensão que apresenta melhor desempenho para uma dada aplicação. Inicialmente é proposta uma metodologia de comparação, que tem como
Publicado em: 2010
-
17. Estudo comparativo de estratégias de controle para inversores de fontes ininterruptas de energia. / A comparative study of control strategies in inverters for uninterruptible power supllies.
Este trabalho tem como objetivo reunir, registrar, estudar e comparar as estratégias de controle utilizadas em inversores para fontes ininterruptas de energia, efetuado através de levantamento bibliográfico, englobando estratégias antigas (implementadas muitas vezes na forma analógica) e recentes (com implementação digital). É realizada comparação
Publicado em: 2010
-
18. Estudo e implementação de um controle de corrente para conversores em matriz e inversores fonte de tensão sem capacitor no elo de corrente contínua / Study and implementation of a current control for matrix converter and voltage source inverters without capacitor in DC link
A presente tese refere-se a um modelo de controle de corrente para conversores em matriz trifásico para trifásico e inversores fonte de tensão trifásica sem capacitor no elo de corrente continua com o objetivo minimizar e compensar as distorções presentes nas tensões de saída dos conversores de modo a obter correntes elétricas senoidais na carga. Ne
Publicado em: 2010
-
19. Conversor CC/CA de alta freqüência baseado em inversores ressonantes com comutação seqüencial para excitação de uma tocha indutiva a plasma térmico
This work describes the study, the analysis, the project methodology and the constructive details of a high frequency DC/AC resonant series converter using sequential commutation techniques for the excitation of an inductive coupled thermal plasma torch. The aim of this thesis is to show the new modulation technique potentialities and to present a technologi
Publicado em: 2010
-
20. Substituição do sincronismo mecânico por sincronismo eletrônico das correias e esteiras de envernizadeiras e impressoras litográficas de folhas metálicas
In the print industry for several segments and a segment of this is on printed sheet metal. This segment is the preparation of steel plates for the manufacture of cans of industry both for domestic use, as industrial. The treatment of steel is based on the application of varnishes and paints that protect the metal against rust and assists in the decoration a
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 12/12/2009
-
21. Controle digital de inversores monofásicos com realimentação de estados internos
This work presents a contribution to the study of PWM sinusoidal inverters. It is presented some voltage output control techniques highlighting the advantages and disadvantages. One technique using two feedback loops and compensation by proportional integral compensators, besides showing a natural short circuit protection, is implemented and evaluated by stu
Publicado em: 2009
-
22. Avaliação do impacto da redução de pressão nas perdas reais em setor de distribuição de água do municipio de Campo Grande MS / Impact of reduction of pressure losses in real sector of water supply of the municipality of Campo Grande MS
The losses in a system of water supply may represent a large percentage of the total water supplied, depending on age, the applied pressure and the deterioration of the system. This paper presents the water losses occurring in water supplies and various control mechanisms available to avoid them. The aim is to correlate the loss of a real system and the same
Publicado em: 2009
-
23. Development of Space Vector PWM usin nonorthogonal reference frame for multilevel inverter voltage source in FPGA / Implementação do algoritmo da Modulação Vetorial usando coordenadas móveis não-ortogonais em Field-programmable Gate Array para inversores multiníveis fonte de tensão
This work presents the implementation and analysis of Space Vector PWM algorithm using non-orthogonal moving reference frame for diode clamped multilevel inverter in Field Programmable Gate Array (FPGA). In this algorithm, the non-orthogonal reference voltage is obtained according to the sector where the Reference Voltage (V*) lies. From the triangle identif
Publicado em: 2009
-
24. SYNTHESIS METHODOLOGY FOR SIMPLIFIED ZVT TOPOLOGIES APPLIED TO BIDIRECTIONAL PWM POLES / METODOLOGIA DE SÍNTESE DE TOPOLOGIAS ZVT SIMPLIFICADAS APLICADAS A PÓLOS PWM BIDIRECIONAIS
Among the soft-switching techniques, the zero-voltage-transition (ZVT) technique has been accepted well by the industry due its attractive characteristics, such as simplicity, low losses in the auxiliary commutation circuit (ACC), operation with soft-switching for a wide load range, and closest operation to the PWM converter counterpart. In three-phase volta
Publicado em: 2009