Interfacial Interaction
Mostrando 1-12 de 61 artigos, teses e dissertações.
-
1. Influence of graphene oxide on ‘in situ’ preparation of nanocomposites with polyvinyl butyral
ABSTRACT In this work, polyvinyl butyral (PVB) nanocomposites reinforced with 0.5 to 2.5 wt% of graphene oxide (GO) were synthesized via ‘in situ’ polymerization. PVB was obtained by condensation of hydroxyl groups of polyvinyl alcohol (PVA) with butyraldehyde (BU) Thermogravimetric analyzes (TGA) showed the increase in the thermal conductivity of the na
Matéria (Rio J.). Publicado em: 16/09/2019
-
2. THE MULTIROLE OF MODIFIED NATURAL GUMS FOR MULTICOMPONENT POLYMERS: AS COUPLING AGENTS FOR POLYMERS REINFORCED WITH CELLULOSIC FIBERS OR COMPATIBILIZERS FOR BIODEGRADABLE POLYMER BLENDS
In this work, the capability to use pine rosin as a biodegradable coupling agent/compatibilizer is studied. To formulate composites, post-consumer polypropylene and discarded agave fibers (as reinforcing agent) are coupled with pine rosin (in pure or maleated form). Besides, poly(lactic acid) (PLA) with poly(butylene adipate-co-terephthalate) (PBAT) are comp
Quím. Nova. Publicado em: 02/05/2019
-
3. Fractographic and rheological characterizations of CF/PP-PE-copolymer composites tested in tensile
Abstract This work shows the fractographic study of fractured surfaces resulted from tensile tests of thermoplastic composites based on poly(propylene-co-ethylene) (PP-PE) and modified PP-PE copolymers reinforced with continuous carbon fibers (CF). The PP-PE matrix was modified with two agents called AM1 (based on maleic anhydride) and AM2 (containing an ela
Polímeros. Publicado em: 29/06/2017
-
4. Non-Linear Three Dimensional Finite Elements for Composite Concrete Structures
Abstract The current investigation focused on the development of effective and suitable modelling of reinforced concrete component with and without strengthening. The modelling includes physical and constitutive models. New interface elements have been developed, while modified constitutive law have been applied and new computational algorithm is utilised. T
Lat. Am. j. solids struct.. Publicado em: 2017-03
-
5. Effects of the application techniques of self-adhesive resin cements on the interfacial integrity and bond strength of fiber posts to dentin
ABSTRACT Objective: To evaluate the influence of an application technique of a glass-fiber post using self-adhesive resin cements on the push-out bond strength and the presence of bubbles in the root thirds. The cements were either applied according to the manufacturer's instruction or using a commercial delivering system (Centrix), at which the cement past
J. Appl. Oral Sci.. Publicado em: 2016-10
-
6. Water interaction and bond strength to dentin of dye-labelled adhesive as a function of the addition of rhodamine B
ABSTRACT Objective This study investigated the effect of the fluorescent dye rhodamine B (RB) for interfacial micromorphology analysis of dental composite restorations on water sorption/solubility (WS/WSL) and microtensile bond strength to dentin (µTBS) of a 3-step total etch and a 2-step self-etch adhesive system. Material and Methods The adhesives Adp
J. Appl. Oral Sci.. Publicado em: 2016-08
-
7. Effect of compatibilization in situ on PA/SEBS blends
Abstract This paper presents the mechanical, thermal and rheological properties of polymer blends of polyamide 6 (PA) and styrene-butylene-styrene (SEBS) using SEBS-g-MA as a coupling agent. The increase in the interfacial interaction of PA/SEBS blends with the addition of SEBS-g-MA was observed to enhance the mechanical properties studied (excellent elongat
Polímeros. Publicado em: 16/06/2016
-
8. Applicability of FT-IR Techniques and Goniometry on Characterization of Carbon Fiber Surfaces
ABSTRACT Carbon fibers have been widely used as structural reinforcement in aeronautical composites, because of their exceptional mechanical properties. However, carbon fibers present few polar groups on their surfaces inducing a weak interaction with some thermosetting and thermoplastic matrices. Surface treatments, such as thermal and electrochemical oxida
J. Aerosp. Technol. Manag.. Publicado em: 2016-03
-
9. Maleic Anhydride as a Compatibilizer and Plasticizer in TPS/PLA Blends
In recent decades, starch has been studied as a raw material due to low production costs. The limitations associated with starch being highly permeable to water vapor and its mechanical properties being dependent on the relative humidity have been investigated. The proprieties of thermoplastic starch/poly(lactic acid) (TPS/PLA) blends have been studied by
J. Braz. Chem. Soc.. Publicado em: 2015-08
-
10. INFLUENCE OF INTERFACIAL FORCES ON THE MIXTURE PREDICTION OF AN ANAEROBIC SEQUENCING BATCH REACTOR (ASBR)
AbstractIn the operation of bioreactors, the fluid movement promotes mixing between sludge and substrate. The dynamics of this system are complex, and the interaction between the phases is difficult to evaluate accurately. In this work, Computational Fluid Dynamics is applied to simulate a pilot-scale anaerobic sequencing batch reactor, using a three-dimensi
Braz. J. Chem. Eng.. Publicado em: 2015-06
-
11. Soil-Framed Structure Interaction Analysis - A New Interface Element
AbstractInterfacial behavior between soil and shallow foundation has been found so influential to combined soil-footing performance and redistribution of forces in the superstructure. This study introduces a new thin-layer interface element formulated within the context of finite element method to idealize interfacial behavior of soil-framed structure intera
Lat. Am. j. solids struct.. Publicado em: 2015-04
-
12. Simple method for mass production of polypyrrole/carbon nanotubes hybrid artificial muscle
Large scale preparation of hybrid electrical actuators represents an important step for the production of low cost devices. Interfacial polymerization of polypyrrole in the presence of multi-walled carbon nanotubes represents a simple technique in which strong interaction between components is established, providing composite materials with potential applica
Quím. Nova. Publicado em: 2014-07