Hot Melt
Mostrando 1-12 de 32 artigos, teses e dissertações.
-
1. Ascorbic acid encapsulation in a glassy carbohydrate matrix via hot melt extrusion: Preparation and characterization
Abstract Hot melt extrusion technology using a twin-screw extruder was employed to obtain maltodextrin, maltodextrin-gum arabic and maltodextrin-trehalose based glassy extrudates containing ascorbic acid (dispersed phase). Ascorbic acid payload of all three formulations was more than 15.67 g/100 g extrudates while the ascorbic acid yield was above 97%. The g
Food Sci. Technol. Publicado em: 16/05/2019
-
2. PCL/ZnO Bio-friendly Films as Food Packaging Material.Thermal and morphological analysis
ABSTRACT Films of Poly(?-caprolactone) (PCL) and PCL/Zinc Oxide (ZnO) were obtained by solution processing. Thermal behaviour and morphological structure were analysed by means of Thermogravimetry (TGA), Differential Scanning Calorimetry (DSC), Optical Microscopy (OM) and Scanning Electron Microscopy (SEM). The addition of ZnO to PCL decreased the degradatio
Matéria (Rio J.). Publicado em: 06/12/2018
-
3. Physical characterization of multiparticulate systems
ABSTRACT The search for new pharmaceutical dosage forms and different drug delivery systems already used in therapeutics is a global trend, serving as an opportunity to expand the portfolio for the pharmaceutical industry. In this context, multiparticulate systems, such as pellets, granules, and minitablets, represent an attractive alternative, given the ran
Braz. J. Pharm. Sci.. Publicado em: 07/05/2018
-
4. Influence of Tungsten on Dry Sliding Wear Behaviour of Sintered/Hot Extruded P/M Alloy Steels (Fe-C-W-Ti)
In the present scenario, Powder Metallurgy (P/M) is an established manufacturing process used to make components of complex geometries with high strength and tolerances by using incredible materials which are difficult to melt or form by other processes. The mechanical properties and microstructures will determine the component characteristic dependent on th
Mat. Res.. Publicado em: 08/06/2017
-
5. Diamond Films on Stainless Steel Substrates with an Interlayer Applied by Laser Cladding
The objective of this work is the Hot Filament Chemical Vapor Deposition (HFCVD) of diamond films on stainless steel substrates using a new technique for intermediate barrier forming, made by laser cladding process. In this technique, a powder layer is irradiated by a laser beam to melt the powder layer and the substrate surface layer to create the interlaye
Mat. Res.. Publicado em: 06/03/2017
-
6. Acacia bark residues as filler in polypropylene composites
Abstract Large amounts of acacia bark residues are produced each day after tannin extraction with hot water, being generally burned. This by-product was chemically characterized and used as filler in polypropylene (PP) composites, considering different particle sizes and concentrations. The materials produced by melt blending had their mecha
Polímeros. Publicado em: 2015-06
-
7. Nanoparticles containing curcuminoids (Curcuma longa): development of topical delivery formulation
Solid lipid nanoparticles incorporating Curcuma longa L., Zingiberaceae, curcuminoids were produced by the hot melt emulsion method. A Box–Behnken factorial design was adopted to study the nanoparticles production at different levels of factors such as the percentage of curcuminoids, time of homogenization and surfactant ratio. The optimized nanoparticles
Rev. bras. farmacogn.. Publicado em: 2015-02
-
8. Effect of solution concentrations on the morphology of nylon6/66 nanofibrous yarns by blown bubble-spinning
In this paper, a novel method called blown bubble-spinning was employed to produce nanofibers. Compared with the traditional technologies, such as melt blowing and electrospinning, hot airflow is used in blown bubble-electrospinning to overcome the surface tension of the polymer bubbles and to pull multiple jets from the broken bubble into nano scale ones wh
Matéria (Rio J.). Publicado em: 2014-12
-
9. Estruturas híbridas para blindagem balística: estudos da interface cerâmica/polímero
Compósitos híbridos polímero/cerâmica têm sido bastante utilizados em painéis de blindagem balística por serem materiais que possuem capacidade de absorver impactos de alta velocidade. A eficiência de absorver impactos sucessivos e a extensão dos danos colaterais do impacto está relacionada a diversos fatores entre eles, um que tem um papel fundame
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 04/05/2012
-
10. A Review of Welding Technologies for Thermoplastic Composites in Aerospace Applications
Abstract: Reinforced thermoplastic structural detail parts and assemblies are being developed to be included in current aeronautic programs. Thermoplastic composite technology intends to achieve improved properties and low cost processes. Welding of detail parts permits to obtain assemblies with weight reduction and cost saving. Currently, joining composite
J. Aerosp. Technol. Manag.. Publicado em: 2012-09
-
11. Development and evaluation of a hot-melt coating technique for enteric coating
O revestimento entérico convencional requer o uso de polímeros orgânicos os quais são igualmente danosos ao meio ambiente e ao pessoal que o executa. O revestimento por fusão a quente evita o uso de solventes e é processo mais seguro e que consome menos tempo. O presente estudo foi planejado para avaliar a eficácia do revestimento por fusão a quente
Brazilian Journal of Pharmaceutical Sciences. Publicado em: 2012-03
-
12. Morphology, structure and mechanical properties of polypropylene modified with organophilic montmorillonite
The aim of this work is to study the properties of systems based on polypropylene (PP) and commercial organophilic montmorillonite, prepared by melt intercalation. Because of the non polar character of PP, the polypropylene-graft-maleic anhydride (PP-g-MA) was used as compatibilizer. Materials containing 2.5, 5, 7.5 and 10% of clay and PP, and two extra comp
Polímeros. Publicado em: 27/01/2012