Ascorbic acid encapsulation in a glassy carbohydrate matrix via hot melt extrusion: Preparation and characterization
AUTOR(ES)
CHANG, Dawei
FONTE
Food Sci. Technol
DATA DE PUBLICAÇÃO
16/05/2019
RESUMO
Abstract Hot melt extrusion technology using a twin-screw extruder was employed to obtain maltodextrin, maltodextrin-gum arabic and maltodextrin-trehalose based glassy extrudates containing ascorbic acid (dispersed phase). Ascorbic acid payload of all three formulations was more than 15.67 g/100 g extrudates while the ascorbic acid yield was above 97%. The glass transition temperature (Tg) of all extrudates was above 40 °C. The expansion ratio of the extrudates and Tg reduced due to the incorporation of trehalose and gum arabic to maltodextrins, respectively. The results of Scanning Electron Microscopy, X-ray diffraction and Fourier-transform Infrared Spectroscopy confirmed that the formulated feed material turned into a glassy state, whereas, ascorbic acid was uniformly dispersed throughout the glassy matrix. Extruded formulations showed a steady dissolution rate, therefore, having a role in controlling the dissolution rate of ascorbic acid.
Documentos Relacionados
- Encapsulation of the alpha-tocopherol in a glassy food model matrix
- Stabilization of hot-melt extrusion formulations containing solid solutions using polymer blends
- Reprocessability of PHB in extrusion: ATR-FTIR, tensile tests and thermal studies
- Preparation and characterization of flurbiprofen beads by melt solidification technique
- Plasmalemma Redox Chain and H+ Extrusion: II. Respiratory and Metabolic Changes Associated with Fusicoccin-Induced and with Ferricyanide-Induced H+ Extrusion