Energy Dispersive System
Mostrando 1-12 de 74 artigos, teses e dissertações.
-
1. Study of rhombohedral tricalcium phosphate in hexagonal crystal structure family on the sample prepared by the sol-gel route and the effect of calcination temperature
Abstract The effect of the calcination temperature at 800 and 1000 °C on the stable formation of the tricalcium phosphate with rhombohedral structure in the system of the hexagonal crystal family was determined, while its precursor was made from limestone obtained from nature in the Lumajang district, Indonesia. The rhombohedral tricalcium phosphate samples
Cerâmica. Publicado em: 2023
-
2. Morphology Behavior of Copper Films Deposited after Wet Surface Treatment on Polished Alumina
In this paper, a pre-treatment process for electroless copper (Cu) deposition on the polished alumina (Al2O3) 99.9% and the behavior of Cu plating by electroless process after Al2O3 surface treatment were explored. Our work was carried out by changing the roughness of Al2O3 through micro-etching (coarsening), nucleation its surface by a two-step method (sens
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
3. Production of nanostructured crystalline composite using residual ashes from flocculated sludge burning process in a poultry slaughterhouse wastewater treatment system
Abstract Nanostructured crystalline composite (activated carbon) was synthesized from residual ashes of the burning process of the sludge generated in the flotation step of a poultry slaughterhouse and was used for Allura red dye adsorption. The ashes were chemically activated using two types of reagents, H2O2 and H3PO4, and the structure, morphology, and su
Cerâmica. Publicado em: 2022
-
4. Reduced Graphene Oxide/Ruthenium Oxide Hexacyanoferrate Nanocomposite for Electrochemical Determination of Ethanol in Commercial Samples
Reduced graphene oxide/ruthenium oxide hexacyanoferrate (rGO/RuOHCF) modified electrode showed synergic activity between the materials attested by the increase of electrochemical current and stability. The preparation of the nanocomposite was made by a simple two-step electrochemical approach. The material structure was characterized by spectroscopic techniq
J. Braz. Chem. Soc.. Publicado em: 2021-06
-
5. Individuals with untreated psychiatric disorders and suicide in the COVID-19 era
Reduced graphene oxide/ruthenium oxide hexacyanoferrate (rGO/RuOHCF) modified electrode showed synergic activity between the materials attested by the increase of electrochemical current and stability. The preparation of the nanocomposite was made by a simple two-step electrochemical approach. The material structure was characterized by spectroscopic techniq
Braz. J. Psychiatry. Publicado em: 2021-06
-
6. Increased depression and anxiety during the COVID-19 pandemic in Brazilian mothers: a longitudinal study
Reduced graphene oxide/ruthenium oxide hexacyanoferrate (rGO/RuOHCF) modified electrode showed synergic activity between the materials attested by the increase of electrochemical current and stability. The preparation of the nanocomposite was made by a simple two-step electrochemical approach. The material structure was characterized by spectroscopic techniq
Braz. J. Psychiatry. Publicado em: 2021-06
-
7. Evaluation of a Graphite-Polyurethane Composite Electrode Modified with Copper Nanoparticles as an Amperometric Flow Detector in a Wall-Jet System for the Determination of Cysteine
A graphite-polyurethane composite electrode (GPUE) was modified by electrodeposition of copper nanoparticles (CuNP) followed by electrochemical treatment in NaOH (GPUE-CuNP), in order to prepare an amperometric sensor for the determination of cysteine (Cys). Cyclic votammograms of Cys solutions at GPUE-CuNP allowed the description of a sequence of electroche
J. Braz. Chem. Soc.. Publicado em: 2020-02
-
8. Treatment of sugarcane bagasse for the immobilization of soybean β-glucosidase and application in soymilk isoflavones
Resumo O bagaço de cana-de-açúcar, de resíduos agroindustriais, foi autoclavado a 121 °C durante 15 min, tratado com NaOH a 2% e ativado com 2,5% de glutaraldeído, para imobilização de β-glicosidase de soja. Análises de microscopia eletrônica de varredura, espectroscopia de raios X por dispersão de energia e espectroscopia de infravermelho por tr
Braz. J. Food Technol.. Publicado em: 17/10/2019
-
9. Microstructure evolution during the extrusion of a 6351 aluminum alloy tube
Abstract The aluminum alloy AA 6351 is a precipitation hardened alloy of the Al-Mg-Si system, additionally containing Mn and Fe. In this study, the microstructural characterization during processing of a thick wall extruded AA 6351 tube was carried out. Several complementary techniques for microstructural characterization were used, such as polarized light o
REM, Int. Eng. J.. Publicado em: 19/06/2019
-
10. Experimental Evaluation of 300 ºC section of Cu-In-Ni Phase Diagram, Hardness and Electrical Conductivity of Selected Alloy
The paper reports comparative experimental and thermodynamic calculation of a Cu-In-Ni ternary system. An isothermal section of the Cu-In-Ni system at 300 ºC was extrapolated using optimized thermodynamic parameters for the constitutive binary systems from literature. Microstructural and phase composition analysis were carried out using scanning electron mi
Mat. Res.. Publicado em: 03/05/2018
-
11. Morphology and Phase Formation During the Solidification of Al-Cu-Si and Al-Ag-Cu Ternary Eutectic Systems
The microstructure of ternary alloys in the Al rich corner of the Al-Cu-Si and Al-Ag-Cu systems were analyzed in order to determine the solidification path in the different structural regions expected from the equilibrium phase diagram. The analysis was based on theoretical models developed in the literature for solidification of ternary eutectic system allo
Mat. Res.. Publicado em: 26/02/2018
-
12. Biocorrosion on Surface of ASTM A283 Carbon Steel, Exposed in Diesel S10 and Tap Water
This paper sets out to evaluate the corrosion and biocorrosion of carbon steel ASTM A283 exposed to a Diesel S10 oil/tap water system under static conditions for 90 days. The following analyzes were performed: physico-chemical in tap water, sulfur content in Diesel S10 and quantification of sessile microorganisms in the biofilm formed on the metal. To monito
Mat. Res.. Publicado em: 22/01/2018