Energy Dispersive System
Mostrando 13-24 de 74 artigos, teses e dissertações.
-
13. Blast Furnace Hearth Lining: Post Mortem Analysis
The main refractory lining of blast furnace hearth is composed by carbon blocks that operates in continuous contact with hot gases, liquid slag and hot metal, in temperatures above 1550 ºC for 24 hours a day. To fully understand the wear mechanism that acts in this refractory layer system it was performed a Post Mortem study during the last partial repair o
Mat. Res.. Publicado em: 15/05/2017
-
14. LEACHING Zn FROM THE LOW-GRADE ZINC OXIDE ORE IN NH3-H3C6H5O7-H2O MEDIA
Abstract In this research, the effect of different citric acid concentrations, ammonia concentration, temperature, leaching time, stirring speed and liquid-to-solid ratio on the zinc leaching from low-grade zinc oxide ore in a NH3-H3C6H5O7-H2O system were studied. The results showed that the zinc leaching rate is only 4.7% when the citric acid concentration
Braz. J. Chem. Eng.. Publicado em: 2016-12
-
15. Solid Phase Extraction to On-Line Preconcentrate Trace Cadmium Using Chemically Modified Nano-Carbon Black with 3-Mercaptopropyltrimethoxysilane
Carbon black (CB) grafted with 3-mercaptopropyltrimethoxysilane (3-MPTMS) was used as solid phase extractor for Cd2+ in a flow injection system coupled to flame atomic absorption spectrometry (FAAS). The influence of pH, buffer concentration, preconcentration flow rate and eluent concentration on preconcentration of Cd2+ were investigated by means of chemome
J. Braz. Chem. Soc.. Publicado em: 2016-10
-
16. Microstructural Characterization of As-Cast V-Si Alloys and Reevaluation of the Invariant Reactions Involving the Liquid Phase of the V-Si System
Alloys containing Me-Si-B (Me - Refractory Metal) are of great interest for high temperature structural applications and accurate knowledge of its low order systems (binaries and ternaries) is important to predict the phase relations in the multicomponent alloys. Recent reevaluations of binaries containing Me-Si found out that the accuracy of the description
Mat. Res.. Publicado em: 05/09/2016
-
17. Evaluation of the remineralization capacity of CPP-ACP containing fluoride varnish by different quantitative methods
ABSTRACT Objective The aim of this study was to evaluate the efficacy of CPP-ACP containing fluoride varnish for remineralizing white spot lesions (WSLs) with four different quantitative methods. Material and Methods Four windows (3x3 mm) were created on the enamel surfaces of bovine incisor teeth. A control window was covered with nail varnish, and WSLs
J. Appl. Oral Sci.. Publicado em: 2016-06
-
18. Pulsed bias effect on crystallinity and nano-roughness of Ti6Al4V-N films deposited by grid assisted magnetron sputtering system
This paper reports the effect of pulsed bias in comparison with DC bias on reactive deposition of Ti6Al4V-N films, obtained by Grid Assisted Magnetron Sputtering. The results obtained by X-Ray diffraction (XRD), Energy Dispersive X-ray Fluorescence Spectrometer (EDX) and Atomic Force Microscopy (AFM) show that bias condition affects the crystalline texture a
Mat. Res.. Publicado em: 2014-12
-
19. Degradation of organic pollutants and characteristics of activated sludge in an anaerobic/anoxic/oxic reactor treating chemical industrial wastewater
A laboratory-scale anaerobic/anoxic/oxic system operated at the hydraulic retention times (HRT) of 20, 40, and 60 h with mixed liquor suspended solids (MLSS) concentrations of 3 g/L and 6 g/L was considered for treating chemical industrial wastewater rich in complex organic compounds and total dissolved solids. Extending the HRT and increasing the MLSS conce
Braz. J. Chem. Eng.. Publicado em: 2014-09
-
20. Corrosion behavior and characterization of plasma nitrided and borided AISI M2 steel
This study investigates the corrosion behaviors of plasma nitrided (PN) and borided AISI M2 steels. The PN process was carried out in a dc-plasma system at a temperature of 923K for 6 h in a gas mixture of 80%N2-20%H2 under a constant pressure of 5 mbar. The boriding process was carried out in Ekabor-II powder at a temperature of 1223K for 6 h. X-ray diffrac
Mat. Res.. Publicado em: 09/05/2014
-
21. Adhesive bonding of resin composite to various titanium surfaces using different metal conditioners and a surface modification system
Objective: This study evaluated the effect of three metal conditioners on the shear bond strength (SBS) of a prosthetic composite material to cpTi grade I having three surface treatments. Material and Methods: One hundred sixty eight rivet-shaped specimens (8.0x2.0 mm) were cast and subjected to polishing (P) or sandblasting with either 50 mm (50SB) or
J. Appl. Oral Sci.. Publicado em: 2013-12
-
22. Doping technique in the interfacial transition zone between paste and lateritic aggregate for the production of structural concretes
This paper discusses the use of doping technique in the interfacial transition zone (ITZ) between Portland cement paste and lateritic aggregates with the objective of promoting the implementation of structural concrete. Doping technique consists of establishing the initial impregnation of the aggregate with a high performance paste in order to improve its bi
Mat. Res.. Publicado em: 11/10/2013
-
23. Bioadsorção e dessorção dos íons Cd POT. 2+ , Cu POT. 2+ , Ni POT. 2+ , Pb POT. 2+ e Zn POT. 2+ pela macrófita aquáica Azolla pinnata / Biosorption and desorption of Cd POT. 2+ , Cu POT. 2+ , Ni POT. 2+ , Pb POT. 2+ e Zn POT. 2+ by the aquatic macrophyte Azolla pinnata
Research in the technology field has been looking for evaluating efficient and economic techniques and/or process for effluents that contains heavy metal. The biodsorption process has been seemed as a good alternative to the existing technology. This work had the aim to investigate the use of Azolla pinnata macrophyte as biosorbent of five metallic ions: Cd2
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 21/11/2012
-
24. Efeito de materiais particulados em sistemas modelos de biomembranas / Effect of Particulate Material on Biomembrane Model Systems
This work presents some of the properties of mimetic systems of pulmonary surfactants (PS) composed of dipalmitoylphosphatidylcholine (DPPC) and DPPC/cholesterol and their interactions with particulate material (PM) originated from the burning of sugar cane leaves which is known by clinical studies as an injurious agent of the respiratory airways. The PM des
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 02/05/2012