Composite Materials Testing
Mostrando 1-12 de 65 artigos, teses e dissertações.
-
1. High-barrier and antibacterial films based on PET/SiOx for food packaging applications
Abstract High-barrier and antibacterial materials have potential applications in the field of preservative packaging for fresh meat products. In this paper, UV irradiation and silane coupling agent (KH550) were used to modify the surface of SiOx coating on polyester (PET)/SiOx film to prepare the PET/SiOx/chitosan and PET/SiOx/chitosan-nano-ZnO composite fil
Food Sci. Technol. Publicado em: 2021-09
-
2. Bond strength assessment of a universal adhesive system in etch-and-rinse and self-etch modes
Resumo Introdução A odontologia moderna é refletida na inserção de novos materiais com diferentes formas de adesão nas estruturas dentárias, como o sistema adesivo Universal. Objetivo Avaliar a resistência adesiva do sistema adesivo universal em dentina, na forma de aplicação auto condicionante e convencional, comparando com um sistema adesivo co
Rev. odontol. UNESP. Publicado em: 07/11/2019
-
3. Interfacial Properties and Bottom/Top Hardness Ratio Produced by Bulk Fill Composites in Dentin Cavities
Resumo O objetivo deste estudo foi avaliar a resistência de união, razão base/topo de microdureza, adaptação marginal e nanoinfiltração interfacial de resinas compostas bulk fill (BF) e tradicional (RT) de viscosidade regular.: Duas BF (Filtek Bulk Fill e Aura Bulk Fill) e duas RT (Filtek Z250XT e Aura) foram testados. Quarenta cavidades cônicas (4,8
Braz. Dent. J.. Publicado em: 07/10/2019
-
4. New material perspective for endocrown restorations: effects on mechanical performance and fracture behavior
Abstract The aim of this study was to investigate the mechanical performance and the fracture behavior of endocrown restorations prepared using distinct restorative materials. A total of 42 sound molars with similar crown size and shape were cut at 2 mm above the cementoenamel junction and endodontically treated. They were categorized according to the restor
Braz. oral res.. Publicado em: 11/02/2019
-
5. Shrinkage stress and elastic modulus assessment of bulk-fill composites
Abstract Bulk-fill composites were introduced in dentistry to accelerate clinical procedures while providing adequate outcomes. Concerns regarding the use of bigger composite increments rely on the polymerization shrinkage and shrinkage stress, which may generate gaps on the adhesive interface and result in a reduced success rate. Objective: To evaluate the
J. Appl. Oral Sci.. Publicado em: 07/01/2019
-
6. Composites based on low-density polyethylene combined with PETcoated SBS paperboard shavings
ABSTRACT In this study, polymer composites comprised of shavings of SBS paperboard coated with polyethylene terephthalate (PET) and recycled low-density polyethylene (LDPE) were obtained. The tensile properties, flexural strength, impact resistance and water absorption were determined according to the standards published by the American Society for Testing a
Matéria (Rio J.). Publicado em: 06/12/2018
-
7. Efeito da adição de fibras híbridas na durabilidade de compósitos cimentícios avançados em ambientes úmidos e agressivos
ABSTRACT Reactive powder concrete (RPC) is one type of advanced cementitious composite that has been increasingly used. Its high mechanical strength enables the application of the composite in bolder structures. Considering its recent history of use, there is a lack of knowledge about this materials durability. Therefore, this paper aimed to evaluate the beh
Matéria (Rio J.). Publicado em: 18/10/2018
-
8. Mode I Interlaminar Fracture Toughness Analysis of Co-Bonded and Secondary Bonded Carbon Fiber Reinforced Composites Joints
Aiming to reduce aircraft weight, aeronautic industry seeks alternative materials and processes used to join its different structural parts. An option to traditional methods are high performance adhesive joints, which reduce weight, number of parts and component final cost, also resulting in higher strength structures. Although, the lack of experimental data
Mat. Res.. Publicado em: 05/02/2018
-
9. The effect of silver nanoparticles on composite shear bond strength to dentin with different adhesion protocols
Abstract In Dentistry, restorative materials and oral bacteria are believed to be responsible for restoration failure. To make long-lasting restorations, antibacterial agents should be made. Inorganic nanoparticles and their nano composites are applied as good antibacterial agents. Objective The purpose of this study was to investigate the effect of silver
J. Appl. Oral Sci.. Publicado em: 2017-08
-
10. Rheological, Morphological and Mechanical Characterization of Recycled Poly (Ethylene Terephthalate) Blends and Composites
This study evaluated the effect of adding poly (ethylene methyl acrylate) (EMA) and cotton linter (CL) on the properties of recycled poly (ethylene terephthalate) (PETrec). For this, PETrec/EMA blend and PETrec/EMA/CL composite were developed. In order to improve the interfacial adhesion and the properties of these materials, ethylene/methyl acrylate/glycidy
Mat. Res.. Publicado em: 11/05/2017
-
11. Effect of different composite core materials on fracture resistance of endodontically treated teeth restored with FRC posts
Abstract Objective This study evaluated the fracture resistance of endodontically treated teeth restored with fiber reinforced composite posts, using three resin composite core build-up materials, (Clearfil Photo Core (CPC), MultiCore Flow (MCF), and LuxaCore Z-Dual (LCZ)), and a nanohybrid composite, (Tetric N-Ceram (TNC)). Material and Methods Forty en
J. Appl. Oral Sci.. Publicado em: 2017-04
-
12. Impairment of resin cement application on the bond strength of indirect composite restorations
The aims of this study were to evaluate the effect of immediate and delayed resin cement application on the microtensile bond strength of indirect composite resin restorations and, to evaluate adhesive strategies (for regular resin cement or humidity parameters for self-adhesive resin cement). Forty-five enamel/dentin discs (0.5 mm height and 10 mm of diamet
Braz. oral res.. Publicado em: 02/06/2015