In-process grinding monitoring through acoustic emission
AUTOR(ES)
Aguiar, Paulo R., Serni, Paulo J. A., Dotto, Fábio R. L., Bianchi, Eduardo C.
FONTE
Journal of the Brazilian Society of Mechanical Sciences and Engineering
DATA DE PUBLICAÇÃO
2006-03
RESUMO
This work aims to investigate the efficiency of digital signal processing tools of acoustic emission signals in order to detect thermal damages in grinding processes. To accomplish such a goal, an experimental work was carried out for 15 runs in a surface grinding machine operating with an aluminum oxide grinding wheel and ABNT 1045 Steel as work material. The acoustic emission signals were acquired from a fixed sensor placed on the workpiece holder. A high sampling rate data acquisition system working at 2.5 MHz was used to collect the raw acoustic emission instead of the root mean square value usually employed. Many statistical analyses have shown to be effective to detect burn, such as the root mean square (RMS), correlation of the AE, constant false alarm rate (CFAR), ratio of power (ROP) and mean-value deviance (MVD). However, the CFAR, ROP, Kurtosis and correlation of the AE have been presented more sensitive than the RMS.
Documentos Relacionados
- Surface topography assessment techniques based on an in-process monitoring approach of tool wear and cutting force signature
- Spray drying of Eugenia dysenterica extract: effects of in-process parameters on product quality
- Determination of the relative position between grinding wheel and a cylindrical workpiece on a 7 axis grinding machine by acoustic emission
- Monitoramento do desgaste de ferramenta no processo de fresamento via emissão acústica
- Tool wear monitoring in the milling process by acoustic emission