Dynamic control of liquid-core/liquid-cladding optical waveguides

AUTOR(ES)

Wolfe, Daniel B.

FONTE

National Academy of Sciences

RESUMO

This report describes the manipulation of light in waveguides that comprise a liquid core and a liquid cladding (liq/liq waveguide). These waveguides are dynamic: Their structure and function depend on a continuous, laminar flow of the core and cladding liquids. Because they are dynamic, they can be reconfigured and adapted continuously in ways that are not possible with solid-state waveguides. The liquids are introduced into the channels of a microfluidic network designed to sandwich the flowing core liquid between flowing slabs of the cladding fluid. At low and moderate Reynolds numbers, flow is laminar, and the liq/liq interfaces are optically smooth. Small irregularities in the solid walls of the channels do not propagate into these interfaces, and liq/liq waveguides therefore exhibit low optical loss because of scattering. Manipulating the rate of flow and the composition of the liquids tunes the characteristics of these optical systems.

Documentos Relacionados

• Dimensions and refractive index estimates of deeply buried optical waveguides in Lithium Fluoride
• Utilizing Shift-or-Shrink Method to Optimize Multisegment Structures of Bent Optical Waveguides
• CARACTERIZAÇÃO DE GUIAS ÓTICOS COM REFLECTOMETRIA DE BAIXA COERÊNCIA
• Prospects for Developing Low-Cost Optical Fiber Sensors for Liquid-Liquid Interface Detection
• ANÁLISE DE GUIAS DE ONDA ÓTICOS CONTENDO MATERIAIS ARBITRARIAMENTE NÃO LINEARES