Wood Boards
Mostrando 1-12 de 24 artigos, teses e dissertações.
-
1. CONSTRUCTION AND TESTING OF GLUED LAMINATED TIMBER FRAMES FOR USE IN LAYING POULTRY HOUSES
ABSTRACT This study aimed to present a solution in glued laminated timber to replace frame structures built in reinforced concrete and metallic structure, which are common in agricultural buildings in western Paraná such as those destined to laying poultry house building by agricultural cooperatives. Structural behavior of frames build from Araucaria angust
Eng. Agríc.. Publicado em: 2020-04
-
2. Ensaio não destrutivo em revestimento cerâmico utilizando um protótipo para detecção de patologia
RESUMO No setor da construção civil há um crescente investimento na manutenção e reparo das construções, como por exemplo, as patologias encontradas nos pisos com revestimento cerâmico. Dentre as patologias mais comuns se pode destacar o assentamento inadequado das placas cerâmicas, que são caracterizadas pela perda de aderência de algumas placas
Matéria (Rio J.). Publicado em: 25/11/2019
-
3. The Effect of Weather on Air-Drying of Messassa Wood
Abstract This study intended to assess the effect of weather on the air-drying process of messassa wood (Brachystegia spiciformis Benth) in two areas of Mozambique (Machipanda and Beira city). First, the logs were sawn into 27 mm thick boards. Every five days the moisture content of the wood was determined by the control samples. For each region, the drying
Floresta Ambient.. Publicado em: 13/06/2019
-
4. CHEMICALLY TREATED GLUED LAMINATED PARICÁ TIMBER (Schizolobium parahyba var. amazonicum)
ABSTRACT In the production of glue-laminated timber (GLT), boards derived from planted forest wood with easy workability are glued on top of one another. The main objective of the present work was to evaluate the performance of paricá timber GLT beams (5 × 10 cm) on GLT. Three procedures were performed: (1) GLT beams (5 × 10 cm) were produced using natura
Eng. Agríc.. Publicado em: 25/04/2019
-
5. Physical Properties of Wood from Steamed Eucalyptus grandis Logs
ABSTRACT This study aimed to evaluate the effect of log steaming on the physical properties of Eucalyptus grandis Hill ex Maiden wood. Logs with diameters between 20 and 25 cm and length of 2.9 m were studied. Half the logs were maintained in their original condition, and the other half were steamed at 90 °C for 20 hours. Later, the logs were sawn into flat
Floresta Ambient.. Publicado em: 21/11/2017
-
6. Production and Properties of a New Wood Laminated Veneer/High-Density Polyethylene Composite Board
AbstractThe paper aimed at evaluating the feasibility and the properties of a new product which combines wood veneer and high-density polyethylene (HDPE) from post-consuming plastic bags. Three HDPE amounts were evaluated: 150g/m2, 250 g/m2 e 350 g/m2. The boards were manufactured using a single-opening hot-press under such conditions: 140ºC, for 20 minutes
Mat. Res.. Publicado em: 2015-10
-
7. Particleboard manufactured from Tauari (Couratari oblongifolia) wood waste using castor oil based polyurethane resin
Several wood species from the Amazon region are used in the manufacture of furniture, which leaves behind large amounts of waste (slabs, sawdust, sanding dust and bark), thus causing serious environmental impacts. An interesting alternative for the use of these wastes is the manufacture of particleboards. However, few studies have focused on the behavior of
Mat. Res.. Publicado em: 18/02/2014
-
8. Produção de painéis de partículas orientadas (OSB) a partir da madeira de um híbrido de Pinus elliottii var. elliottii var. Pinus caribaea var. hondurensis / Production of oriented strand board (OSB) from a hybrid of Pinus elliottii var. elliottii x Pinus caribaea var. hondurensis
The study about the quality of the wood of Pinus hybrids in Brazil is still recent. On the other hand, some data indicate that the material can be considered promising from the point of view silvicultural. This study aimed to evaluate the potential use of wood hybrid Pinus elliottii var. elliottii x Pinus caribaea var. hondurensis for the production of orien
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 29/06/2012
-
9. Propiedades físico-mecánicas de tableros terciados construidos con especies tropicales de plantaciones para uso estructural
Concrete, steel and plastics are the materials used for construction in Costa Rica. Meanwhile, wood from plantation are being introduced in the market. The present study aims to characterize and measured some physical and mechanical properties of plywood panels manufactured with veneers of Gmelina arborea, Tectona grandis and Acacia mangium coming from fores
CERNE. Publicado em: 2012-06
-
10. Tableros de partículas de bambú (Bambusa vulgaris Schrad) y resina poliuretana a base de aceite de rícino (Ricinus communis L.)
The aim of this study was to manufacture and evaluate particleboards made with two alternative materials, seeking to develop a sustainable production process. Particles from Bambusa vulgaris Schrad were used because of the fast production cycle of this species. The binder used was castor oil (Ricinus communis L.) based polyurethane resin, since it is partial
Ambiente Construído. Publicado em: 2010-12
-
11. DESEMPENHO DE DUAS ESPÉCIES FLORESTAIS EM COMBINAÇÃO COM CASCA DE ARROZ NA FABRICAÇÃO DE PAINÉIS CIMENTOMADEIRA / PERFORMANCE OF TWO SPECIES IN COMBINATION WITH RICE HUSK IN THE MANUFACTURE OF CEMENT-WOOD PANELS
The present paper had as objective the evaluation of performance of panels composed by cement and different proportions of two combined wooden species with rice husk. There, were applied treatments where the levels of wooden residues were 0, 25, 50, 75 and 100%, while the proportion of rice husk was 100, 75, 50, 25 and 0%, respectively. The wood species in t
Publicado em: 2009
-
12. Risco-retorno e elasticidade da demanda da madeira serrada e custo do manejo florestal na Amazônia / Risk-return and demand elasticity of sawn wood and forest management cost in Amazon
This work had as a main objective to contribute for the native forest management in the Amazonian Oriental area, collaborating for the visualization of financial economical aspects. The risk-return relationship of sawn wood from different forest native species of the Amazonian area was characterized, with the specific objective to determinate the riskreturn
Publicado em: 2009