Wetting
Mostrando 1-12 de 151 artigos, teses e dissertações.
-
1. Quality of life in enuretic children
ABSTRACT Introduction: Nocturnal enuresis is a highly incident chronic disorder that generates countless problems to the child and their parents. Bed-wetting has significant negative impacts on self-esteem and the performance of children. The aim of the current study is to assess the quality of life of enuretic children, as well as its association to sex an
Int. braz j urol.. Publicado em: 2021-06
-
2. Analysis of carbonation and hydration of BOF steel slag for application as railway ballast
Abstract The reutilization of waste is a valuable alternative for the preservation of natural resources and the environment. In this sense, Basic Oxygen Furnace (BOF) steel slag is one of the most residues generated in steel the industry. It is estimated that for each ton of steel produced, about 150 kg of steel slag is generated in the BOF process. Generall
REM, Int. Eng. J.. Publicado em: 2020-12
-
3. Temporal stability of soil moisture in banana cropping area in the Brazilian semiarid region
RESUMO A umidade do solo é essencial para a produção agrícola. O conhecimento de sua variabilidade espaço-temporal é indispensável para suporte à agricultura, sendo fortemente influenciada pelas práticas culturais, condições de cobertura do solo e métodos de irrigação. Assim, este estudo teve como objetivo avaliar a estabilidade temporal e a di
Rev. bras. eng. agríc. ambient.. Publicado em: 14/10/2019
-
4. Plastics floatability: effect of saponin and sodium lignosulfonate as wetting agents
Abstract Froth flotation is the most common process in mineral processing. For the separation of plastic mixtures by flotation, the use of appropriate wetting agents is mandatory. The floatability of six post-consumer plastics was studied at different concentrations of the wetting agents, saponin and sodium lignosulfonate. Also, the influence of size and sha
Polímeros. Publicado em: 03/10/2019
-
5. Caracterização mecânica do gesso para revestimento produzido no Polo Gesseiro do Araripe
Resumo O gesso é um material de grande uso na construção civil, destacando-se seu emprego como pasta de gesso para revestimento. No Brasil, o Polo Gesseiro do Araripe é o maior produtor. Percebe-se a necessidade de conhecimento das propriedades e características desse material, principalmente, com foco no produto acabado como revestimento interno em par
Ambient. constr.. Publicado em: 03/10/2019
-
6. Superhydrophobic silicon fabricated by phosphomolybdic acid-assisted electrochemical etching
Controllable geometry silicon surfaces with superhydrophobicity are difficult to be fabricated without photolithography techniques. Superhydrophobic silicon surfaces with water contact angle larger than 150º and sliding angle less than 10º have been successfully fabricated by electrochemical etching strategy. Squarelike hole arrays with controllable geomet
Quím. Nova. Publicado em: 26/08/2019
-
7. Corrodibility and Adherence of Reinforced Concrete Rebars Electroplated with Zinc and Zinc-Nickel Alloys
Reinforced concrete is the main structural material used in the world in the construction of bridges, roads and commercial and residential buildings. One effective method for preventing corrosion of steel reinforcement is the application of galvanic coatings to the reinforcement itself. The present study evaluated the performance of three groups of reinforci
Mat. Res.. Publicado em: 15/07/2019
-
8. Analysis of the physical quality of genetically modified and conventional maize grains in the drying and wetting processes
RESUMO O objetivo deste trabalho foi avaliar a qualidade física dos grãos de milho geneticamente modificados (Herculex 30S31) em função dos processos de secagem e umedecimento em relação ao milho convencional (AG 1051). O delineamento experimental foi o inteiramente casualizado, com esquema fatorial (7x3x2), sete tempos de secagem ou umedecimento (0, 2
Rev. Ciênc. Agron.. Publicado em: 04/07/2019
-
9. Effects of pre-wetting aggregate on the properties of mortars made with recycled concrete and lightweight aggregates
RESUMO Este artigo buscou verificar a substituição parcial do agregado natural, areia (NA) por agregado de concreto reciclado (RCA) ou agregado leve (LWA) em argamassas, sob a hipótese que agregados pré-molhados produziriam melhoras nas propriedades da argamassa. Para isso, avaliou-se as propriedades das argamassas no estado fresco, como massa específic
Matéria (Rio J.). Publicado em: 10/06/2019
-
10. Selecting chemicals for separation of ABS and HIPS in WEEE by froth flotation
Abstract The feasibility of using common chemicals to separate plastics from waste electrical and electronic equipment (WEEE) by froth flotation is investigated. Plastic waste is one of the WEEE polluters and a separation is necessary to recycle it. The most common plastics in electronic industries are acrylonitrile-butadiene-styrene (ABS) and high impact po
Polímeros. Publicado em: 10/06/2019
-
11. Influência do resíduo de PVC como agregado no concreto para peças de pavimentos intertravados
Resumo Este trabalho apresenta uma análise da influência do resíduo de PVC como substituto parcial do agregado miúdo em propriedades físicas como absorção de água, índice de vazios, massa específica e de resistência à compressão do concreto dosado para peças de pavimentos intertravados. Foram analisados quatro traços de concreto, sendo um de r
Ambient. constr.. Publicado em: 10/06/2019
-
12. Reestruturação na forma do tratamento de efluentes têxteis: uma proposta embasada em fundamentos teóricos
Resumo As indústrias têxteis utilizam grandes quantidades de água nos processos de tingimento e beneficiamento das fibras, gerando volumes elevados de efluentes contendo corantes, surfactantes, íons inorgânicos, agentes umectantes, entre outros. O principal impacto ambiental desses efluentes está relacionado com a absorção de luz no meio aquático,
Gest. Prod.. Publicado em: 01/04/2019