Weld Fatigue
Mostrando 1-12 de 12 artigos, teses e dissertações.
-
1. Uma nova abordagem para a medição da diluição de soldagem, baseada nos pontos de inflexão de um Contorno Ativo
RESUMO Em diversas aplicações, com ênfase nos processos de soldagem dissimilar, a diluição, em conjunto com outros fatores, pode afetar as propriedades mecânicas dos materiais soldados, sendo assim, capaz de gerar falhas durante as condições normais de serviço. Deste modo, a taxa de diluição geralmente é calculada a partir da análise de imagens
Matéria (Rio J.). Publicado em: 20/05/2019
-
2. Fatigue lifespan of a fillet welded joint - Hybrid approach to obtain the S-N curve with a reduced number of tests
Abstract This paper introduces a hybrid approach for obtaining S-N curves with reduced number of tests associated to statistically simulated data. In order to validate the proposal, two validation process were developed. One using a methodology to generate S-N curves based on Monte Carlo simulations and other using actual data according Zhao et al. (1998), a
Lat. Am. j. solids struct.. Publicado em: 18/10/2018
-
3. Microstructure and Mechanical Properties of ASTM A743 CA6NM Steel Welded by FCAW Process
CA6NM steel is widely used in the manufacture of hydraulic turbines metallic parts, due to its resistance to corrosion and cavitation damage, combined with good weldability and fatigue properties. However, welding of this type of steel is complex and to ensure a minimum residual stress after welding it is necessary perform a post welding heat treatment (PWHT
Mat. Res.. Publicado em: 21/09/2017
-
4. Weldability studies and parameter optimization of AISI 904L super austenitic stainless steel using friction welding
Welding input parameters play a very significant role in determining the quality of a weld joint. The quality of the joint can be defined in terms of mechanical properties, distortion and weld-bead geometry. Generally, all welding processes are employed with the aim of obtaining a welded joint with the desired characteristics. The purpose of this study is to
Mat. Res.. Publicado em: 04/07/2014
-
5. Tensiones residuales en uniones soldadas por FSW en aluminio 7075-T651
Residual stresses could be a relevant issue in the structural integrity of a component in service and usually have a major influence on their fatigue life, among other failure mechanisms. In recent years Friction-Stir Welding (FSW) has revolutionized the welding technology. Its main application has been given in aluminum alloys, but nowadays can be applicabl
Soldag. insp.. Publicado em: 2012-12
-
6. A fatigue life prediction model of welded joints under combined cyclic loading. / Um modelo para previsão de vida à fadiga de juntas soldadas submetidas a carregamentos combinados.
The main purpose of this work is to develop a practical and robust methodology to evaluate the fatigue life in seam weld joints fabricated with GMAW process when subjected to combine cyclic loading. The maximum linear stress at the typical crack initiation region, better known as hot spot stress, was used to calculate the fatigue life through high cycle fati
Publicado em: 2010
-
7. Avaliação da vida em fadiga de uma bancada de testes utilizada para realizar ensaios em dutos flexíveis na CADETEC/UFRGS / Fatigue assesment of a riser test machine at the CADETEC/UFRGS
Neste trabalho se realizará a avaliação da vida em fadiga da bancada de ensaios que está sendo projetada e será utilizada nos ensaios de dutos flexíveis na CADETC. Esta estrutura modular tem seção octogonal, sendo que os módulos são parafusados entre si constituídos por tubos cilíndricos soldados uns aos outros. Diversos modelos numéricos serão
Publicado em: 2010
-
8. Analysis of titanium casting s situation and of laser-weld joint s quality made in Ti cp and Ti-6AI-4V structures / Estudo da qualidade da fundição do titanio comercialmente puro e da união soldada a laser em estruturas de Ti cp e em liga de Ti-6AI-4V
O objetivo desse estudo foi: 1) Examinar por meio de radiografias, a incidência de porosidade interna em estruturas fundidas em titânio comercialmente puro, com diferentes diâmetros de secção transversal; 2) Analisar essa incidência em uniões soldadas a laser, com diferentes distâncias de soldagens, em espécimes de Ti cp e Ti-6Al-4V, variando o diâ
Publicado em: 2009
-
9. Determinação do limite de fadiga em chapas de aço de baixo carbono para vasos de pressão com e sem solda de filete
This dissertation presents the survey of fatigue strength limit for samples with and without welding, that were constructed of low carbon steel for pressure vessels. The e samples were calculated through the Finite Element Method, where the g in each model, that represents a sample, it corresponds to the displacement fatigue test machine and measured through
Publicado em: 2006
-
10. Fatigue properties of high strength low alloy steel weld metals with different microstructural composition. / Propriedades de fadiga de soldas de alta resistência e baixa liga com diferentes composições microestruturais.
Foram estudadas as propriedades de fadiga em dois grupos de soldas de alta resistência e baixa liga com diferentes composições microestruturais. As soldas do grupo A apresentaram microestruturas compostas de ferrita acicular, ferrita alotriomórfica e ferrita de Widmanstätten, com limite de escoamento de aproximadamente 460 MPa, enquanto que as soldas do
Publicado em: 1999
-
11. Avaliação da tenacidade à fratura de soldas de alta resistência e baixa liga pelo método da integral-J. / Evaluation of high strength low alloy steel weld metal fracture toughness using the J-integral method.
The influence of the microstructure on the fracture toughness behaviour of two groups of multipass High Strength Low Alloy (HSLA) steel weld metals, presenting different microstructure composition, was evaluated. The weld metals A1/A2 exhibited a microstructure composed by acicular ferrite, allotriomorphic ferrite, Widmanstätten ferrite and microphases, and
Publicado em: 1998
-
12. Metallurgical analysis of failed Björk-Shiley cardiac valve prostheses.
An investigation into the mechanisms of failure of current Björk-Shiley cardiac valve prostheses is reported. Two failed valves, one apparently unfailed but defective valve, and one unused valve, were examined by scanning electron microscopy and metallographic section. In the first two valves (removed 12 and 23 months after implantation) fracture was associ