Water Heating
Mostrando 1-12 de 319 artigos, teses e dissertações.
-
1. Method for Cleaning Back-Produced Water from Polymer Flooding Operations to Determine Polymer Molar Mass Using Size-Exclusion Chromatography
One of the methods used by the oil industry to increase production is to inject water, containing polymer, into the reservoir. The viscosity of the aqueous solution is primarily responsible for the efficiency of this method, and is achieved using polymers with high molar mass. However, polymer degradation can occur during pumping and fluid displacement in th
J. Braz. Chem. Soc.. Publicado em: 2020-12
-
2. Maximization of the use of casting sand residue in the production of fired ceramic bricks
Abstract In this study, a red ceramic was developed with the addition of sand residue from deburring and finishing processing of cast iron molds, replacing a variable fraction of the clay. The formulated masses were shaped by pressing and firing at different temperatures (850, 900 and 1000 ºC) at a heating rate of 180 ºC/h and 2-hour level. The bodies were
REM, Int. Eng. J.. Publicado em: 2020-09
-
3. ARTIFICIAL NEURAL NETWORKS FOR PREDICTION OF PHYSIOLOGICAL AND PRODUCTIVE VARIABLES OF BROILERS
ABSTRACT Due to a number of factors involving the thermal environment of a broiler cutting installation and its interaction with the physiological and productive responses of birds, artificial intelligence has been shown to be an interesting methodology to assist in the decision-making process. For this reason, the main aim of this work was to develop an art
Eng. Agríc.. Publicado em: 2020-02
-
4. Acrylamide reduces plasma antioxidant vitamin levels in rats due to increased oxidative damage
RESUMO Objetivo A acrilamida é um químico potencialmente neurotóxico e carcinogênico, sendo naturalmente criada durante o processo de aquecimento de alimentos ricos em carboidratos, como batatas fritas e cereais matinais. Dado que o composto pode ser ingerido através do consumo de alimentos, o presente trabalho teve por objetivo investigar o seu efeito
Rev. Nutr.. Publicado em: 17/01/2020
-
5. Assessment of sulfamethoxazole adsorption capacity on Pirangi clay from the State of Sergipe, Brazil, modified by heating and addition of organic cation
Resumo O sulfametoxazol (SMX) é um antibiótico amplamente usado no tratamento de doenças e infecções e é frequentemente detectado em ecossistema de águas superficiais. Assim, este trabalho avaliou a capacidade de remoção deste antibiótico de sistemas aquosos utilizando argila Pirangi (PIR) do estado de Sergipe (Brasil). Amostras de argila Pirangi f
Cerâmica. Publicado em: 14/11/2019
-
6. Influence of high-frequency microwave radiation on montmorillonite structure parameters
Resumo A influência da radiação micro-ondas nas alterações estruturais das partículas de montmorilonita foi estudada em uma amostra de argila montmorilonítica. Processos de longo alcance em múltiplas escalas foram induzidos nos aluminossilicatos naturais por radiação de micro-ondas de baixa e média potência (2,45 Hz, 750 W, 10 min). Amostras em p
Cerâmica. Publicado em: 14/11/2019
-
7. Impactos econômicos da ampliação do uso de energia solar residencial em Minas Gerais
Resumo Este artigo analisa os impactos econômicos de uma ampliação do uso de energia solar pelas famílias mineiras através do modelo de Equilíbrio Geral Computável (EGC) denominado Imagem-MG. Em contraste com outros trabalhos que utilizam essa metodologia para analisar questões energéticas, o presente trabalho se propôs a analisar os impactos distr
Nova econ.. Publicado em: 10/10/2019
-
8. Evaluation of the Acid Baking Technique to Decrease the Phosphorus Content of the Iron Ore
Unlike the available mineral resources, the steelmaking processes have demanded raw material with lower phosphorus content to decrease the costs, energy use, and the residue generated within the steel plant. One alternative is to develop pretreatment of the iron ore concentrates producing raw materials with lower phosphorus. Depending on the mineral structur
Mat. Res.. Publicado em: 23/09/2019
-
9. Indoor Air Quality in the Hospital: The Influence of Heating, Ventilating and Conditioning Systems
Abstract Clean, fresh air is the most important requirement for good indoor air quality (IAQ) in all buildings, but it is especially important with regard to the environments within hospitals and other healthcare facilities. The literature indicates that buildings with heating, ventilating and air conditioning (HVAC) systems may have an increased risk of sic
Braz. arch. biol. technol.. Publicado em: 05/09/2019
-
10. HYBRID SOLAR HEAT PUMP SYSTEM FOR WATER HEATING
ABSTRACT A comparative test of water heating between the hybrid system - solar collector with heat pump - and a system with conventional supplementary heating - with high electric power - was performed. For this, a small capacity heat pump was installed, which was later installed together with a solar heating system, composed of a 250 L thermal reservoir and
Eng. Agríc.. Publicado em: 12/08/2019
-
11. Row orientation effects on Syrah grapevine performance during winter growing season
ABSTRACT The sunlight and heating effects on leaves and grapes are directly influenced by row orientation in vineyards. Row orientation studies have not been addressed under double pruning management, a technique used to transfer the wine grape harvest from wet summer to dry winter season in Brazilian Southeast. Effects of grapevine row orientation (north/so
Rev. Ceres. Publicado em: 12/08/2019
-
12. Solid-state Morphology Evolution of Sodium Neutralized Poly(ethylene-ran-methacrylic acid) Ionomer Under Dry and Wet Thermal Annealing
The DSC low temperature endothermic peak shown by sodium neutralized poly(ethylene-random-methacrylic acid) (E/MAA-Na+) ionomers in the range of 50-70 ºC is attributed to the endothermic reordering of polyethylene chain segments belonging to two populations of quasi-crystals set from melt, initially showing no birefringence. Dry or wet thermal annealing imp
Mat. Res.. Publicado em: 08/08/2019