Vibration Damping
Mostrando 1-12 de 73 artigos, teses e dissertações.
-
1. Effects of soil-structure interaction in seismic analysis of buildings with multiple pressurized tuned liquid column dampers
Abstract In this paper soil-structure interaction (SSI) effects are investigated while an array of Pressurized Tuned Liquid Column Dampers (PTLCD) is employed for seismic vibration control of buildings. This device represents the most general case of a passive damper, with different reduction options to other control devices obtained by simplifying the invol
Lat. Am. j. solids struct.. Publicado em: 12/09/2019
-
2. Dynamic analysis of a concrete chimney considering the aerodynamic damping
Resumo Tradicionalmente, estruturas submetidas ao vento são avaliadas através de análises estáticas com carregamentos equivalentes, onde a influência da resposta flutuante é levada em conta por meio do fator de rajada. Essa metodologia é aplicável a estruturas suficientemente rígidas para não apresentarem resposta dinâmica ponderável [ ]. Estrutu
Rev. IBRACON Estrut. Mater.. Publicado em: 20/05/2019
-
3. OPTIMIZATION OF DYNAMIC VIBRATION ABSORBERS BASED ON EQUAL-PEAK THEORY
Abstract The present paper proposes a new procedure to determine the optimal parameters of a dynamic vibration absorber (DVA), considering both damped and undamped primary system. The DVA design is formulated as an optimization problem in which the objective function is constructed based on Den Hartog's equal-peak method. The DVA parameters are selected to m
Lat. Am. j. solids struct.. Publicado em: 25/04/2019
-
4. Studying Torsional Vibration of a Micro-shaft in a Micro-scale Fluid Media based on Non-classical Theories
Abstract In this paper, torsional vibration of a micro-shaft in interacting with a micro-scale fluid media has been investigated. The presented mathematical model for this study is made up of a micro-shaft with one end fixed and a micro-cylinder at its free end which is immersed in a micro-scale fluid media. The micro-shaft can be actuated torsionally via ap
Lat. Am. j. solids struct.. Publicado em: 04/02/2019
-
5. Structural Health Monitoring of Sandwich Structures Based on Dynamic Analysis
Abstract This work aims to contribute to the development of SHM systems based on vibration methods to be applied on sandwich structures. The main objective is focused on experimental damage identification via changes in the Frequency Response Function (FRF) with the usage of damage metrics. Specimens of sandwich structures made from skins of epoxy resin rein
Lat. Am. j. solids struct.. Publicado em: 29/10/2018
-
6. Analytical solution for nonlinear dynamic behavior of viscoelastic nano-plates modeled by consistent couple stress theory
Abstract This paper analyses the non-stationary free vibration and nonlinear dynamic behavior of the viscoelastic nano-plates. For this purpose, a size-dependent theory is developed in the framework of the consistent couple stress theory for viscoelastic materials. The previously presented modified couple stress theory was based on some consideration making
Lat. Am. j. solids struct.. Publicado em: 17/09/2018
-
7. Measurement of Strain-Amplitude Dependent Internal Friction with Torsion Pendulum and Vibration Reed Methods
In the traditional standard of internal friction measurement the torsion pendulum and vibration reed were preferentially recommended where the issue of strain amplitude dependence of internal friction was not concerned. To more precisely measure the internal friction and modulus at various strain amplitude, in this paper the strain amplitude dependence of in
Mat. Res.. Publicado em: 28/05/2018
-
8. On the Nonlinear Transient Analysis of Planar Steel Frames with Semi-Rigid Connections: From Fundamentals to Algorithms and Numerical Studies
Abstract This paper presents the fundamentals for prediction of a more realistic behavior of planar steel frames with semi-rigid connections under dynamic loading. The majority of the research in this area concentrates on the nonlinear static analysis of frames with semi-rigid connections. Indeed, few studies have contributed to the nonlinear dynamic and vi
Lat. Am. j. solids struct.. Publicado em: 03/05/2018
-
9. Polyester Pinning Effect on Flexural and Vibrational Characteristics of Foam Filled Honeycomb Sandwich Panels
Abstract Polyester pins are incorporated in polyurethane foam filled honeycomb core sandwich panel to increase the interfacial strength between the faces and core in order to improve the performance of sandwich structures. Foam filled Honeycomb Sandwich panel (FHS) and Pin incorporated Foam filled Honeycomb sandwich panels (PFHS) were developed. The develope
Lat. Am. j. solids struct.. Publicado em: 2017-08
-
10. A Modified FEM for Transverse and Lateral Vibration Analysis of Thin Beams Under a Mass Moving with a Variable Acceleration
Abstract In this paper, a new modified finite element method that can be used in the analysis of transverse and lateral vibrations of the thin beams under a point mass moving with a variable acceleration and constant jerk is presented. Jerk is the change in acceleration over time. In this method, the classical finite element of the beam is modified by the in
Lat. Am. j. solids struct.. Publicado em: 2017-03
-
11. Time Domain Modeling and Simulation of Nonlinear Slender Viscoelastic Beams Associating Cosserat Theory and a Fractional Derivative Model
Abstract A broad class of engineering systems can be satisfactory modeled under the assumptions of small deformations and linear material properties. However, many mechanical systems used in modern applications, like structural elements typical of aerospace and petroleum industries, have been characterized by increased slenderness and high static and dynamic
Lat. Am. j. solids struct.. Publicado em: 2017-01
-
12. Tip Deflection Determination of a Barrel for the Effect of an Accelerating Projectile Before Firing Using Finite Element and Artificial Neural Network Combined Algorithm
Abstract For realistic applications, design and control engineers have limited modelling options in dealing with some vibration problems that hold many nonlinearity such as non-uniform geometry, variable velocity loadings, indefinite damping cases, etc. For these reasons numerous time consuming experimental studies at high costs must be done for determining
Lat. Am. j. solids struct.. Publicado em: 2016-10