Velocity Of Particle
Mostrando 1-12 de 186 artigos, teses e dissertações.
-
1. Prediction of pressure drop through packed beds of granular materials: influence of moisture reduction and air velocity
Resumo Neste estudo foi investigada a influência da umidade do sólido sobre a queda de pressão em leitos fixos de soja, cevada, lentilha e aveia. As propriedades dos grãos e do leito foram determinadas variando-se a umidade dos sólidos entre o valor de equilíbrio até 0,24 g g-1 (massa de água por massa de sólido seco). As quedas de pressão nos leit
Braz. J. Food Technol.. Publicado em: 07/10/2019
-
2. PREDICTION OF COAL SLURRY PIPELINE TRANSPORTATION GRADING REDUCTION AND ITS INFLUENCE ON PIPE TRANSPORTATION PARAMETERS
Abstract Coal slurry pipe, being a new type of energy transportation mode, changes of the particle composition and the effect on other parameters are worth studying. Comparison of ring tube test measured data and batch grinding model simulation data shows that batch grinding model can predict the coal particle gradation to a certain extent. The effect of col
Braz. J. Chem. Eng.. Publicado em: 30/09/2019
-
3. Velocidade limite c
Resumo Neste artigo, é proposta uma nova maneira de ensinar estudantes de graduação que a velocidade de luz c é um limite físico para corpos materiais. Dois diferentes 'gedankenexperimente', conceitualmente equivalentes, baseados em princípios de eletrodinâmica básica são propostos e discutidos, chegando à mesma conclusão de que se um corpo materi
Rev. Bras. Ensino Fís.. Publicado em: 14/03/2019
-
4. Wind Tunnel Investigation of the Wind Patterns in the Launching Pad Area of the Brazilian Alcântara Launch Center
ABSTRACT This paper presents a wind tunnel study of the flow patterns in the main Brazilian Space Port, the Alcântara Launch Center (ALC), located in the Northwest region, over an irregular coastal cliff of 40 m height. In the ALC region, constant winds of strong incidence are very common, which can change the characteristics of the atmospheric boundary lay
J. Aerosp. Technol. Manag.. Publicado em: 14/01/2019
-
5. Design of Microwave Absorbers using Improvised Particle Swarm Optimization Algorithm
Abstract Particle Swarm Optimization (PSO) algorithm has been applied in electromagnetics to design microwave absorbers. Generally, microwave absorbers are used for absorbing the electromagnetic radiation caused due to numerous electronic equipments and is being extensively used in stealth technology. The main aim of this paper is to find and analyze the min
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2018-06
-
6. Proper Orthogonal Decomposition and Spectral Analysis of a Wall-Mounted Square Cylinder Wake
ABSTRACT: The flow patterns over a finite square cylinder of aspect ratio of 3 were analyzed experimentally in a subsonic wind tunnel using the time-resolved particle image velocimetry (TR - PIV) techniques. The near wake flow structures and vortex shedding characteristics were investigated using mean flow analysis, spectral analysis and proper orthogonal de
J. Aerosp. Technol. Manag.. Publicado em: 03/05/2018
-
7. Cellular Ceramics Produced from Ceramic Shell: Processing and Characterization
In this work, ceramic shell (mullite source), an industrial solid waste from the lost-wax casting process, after crushing and milling steps, was used and evaluated as an alternative raw material source for the production of cellular ceramics for high temperature applications (> 1400 °C). The obtained ceramic shell powder, with particle size distribution (d5
Mat. Res.. Publicado em: 09/11/2017
-
8. Investigation of hydrodynamics and heat transfer in pseudo 2D spouted beds with and without draft plates
Abstract In the present study, hydrodynamics and gas to particle heat transfer in pseudo two dimensional spouted beds (2DSB) with and without draft plates were investigated using the Eulerian-Eulerian approach. The main objective of the study was to provide an understanding of effects of the presence of draft plates on the hydrodynamics and heat transfer beh
Braz. J. Chem. Eng.. Publicado em: 2017-10
-
9. Valorization of mining waste from Ouenza iron ore mine (eastern Algeria)
Abstract The present article is devoted to the development of a hematite-poor ore mine in Ouenza, which does not meet the steelmaker's requirements. Significant volumes are stored at the pithead of the mine, and the reserves are estimated at over 100 million tones. This enormous quantity of mining waste occupies an important space and poses a real threat to
REM, Int. Eng. J.. Publicado em: 2017-03
-
10. Comportamiento Tribológico y Microestructural en Recubrimientos Aplicados por GTAW y HVOF (Proceso Térmico de Espreado) y Usado en Recuperación de Aceros Grado Herramienta AISI/SAE D2
Abstract The Fe-Cr-Mo alloys are use in covers to protect the components that are under wear and corrosion. The high velocity thermo spray covering by HVOF (high velocity oxi-fuel) in Fe-Cr-Mo alloys has reported as a good result in projection fields for the steel tool grade for cold work. The HOVF is an attractive method to apply covering and recuperate dia
Soldag. insp.. Publicado em: 2016-06
-
11. SOLID HOLDUP AND CIRCULATION RATE IN A LIQUID-SOLID CIRCULATING FLUIDIZED BED WITH VISCOUS LIQUID MEDIUM
Abstract Experiments were conducted in a liquid-solid circulating fluidized bed with different viscous liquids and particles to study the hydrodynamics, average solid hold up and solid circulation rate. The effects of operating parameters, i.e., primary liquid flow rate in the riser, auxiliary liquid flow rate, total liquid flow rate and viscosity of the liq
Braz. J. Chem. Eng.. Publicado em: 2015-12
-
12. LIQUID FLOW IN IMPELLER SWEPT REGIONS OF BAFFLED AND UNBAFFLED VESSELS WITH A TURBINE-TYPE AGITATOR
Abstract Liquid flow in the impeller swept region of vessels with a turbine-type agitator was examined for the flow path between the neighboring blades of the rotating impeller. Visualization of the flow and its measurement were done using particle tracking velocimetry with a camera rotating along with the impeller. Internal liquid flow of the impeller diffe
Braz. J. Chem. Eng.. Publicado em: 2015-12