Unidirectional Transient Solidification
Mostrando 1-6 de 6 artigos, teses e dissertações.
-
1. Transient Unidirectional Solidification, Microstructure and Intermetallics in Sn-Ni Alloys
The present research work examines the microstructural arrangements formed during the transient solidification of eutectic Sn-0.2wt.%Ni and hypereutectic Sn-0.5wt.%Ni alloys. Also, it examines their respective correlations with solidification thermal parameters: eutectic growth rate (VE) and eutectic cooling rate (ṪE); length scales of matrix and eutectic
Mat. Res.. Publicado em: 12/04/2018
-
2. Análise da evolução microestrutural e da formação de macrossegregação e microporosidade na solidificação unidirecional transitória de ligas ternárias Al-Cu-Si / Analysis of microestrutural evolution and formation of macrosegregation and microparasity in the unidirectional transient solidification of ternary Al-Cu-Si alloys
As ligas fundidas de alumínio vêm desempenhando um papel importante no crescimento da indústria metal-mecânica. Hoje, essas ligas são produzidas em vários sistemas e dezenas de composições. Destacamos as ligas do sistema ternário Al-Cu-Si que apresentam excelente fluidez, alta resistência mecânica e baixo peso, o que as tornam uma escolha adequada
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 01/02/2012
-
3. Transient solidification, microstruture and properties of Al-Ni alloys / Solidificação transitoria, microestrutura e propriedades de ligas Al-Ni
The development of optimized microstructures during the solidification stage of processing is of fundamental importance to the mechanical properties and to the performance of finished products of metallic alloys. In this study the kinetics of solidification and its effects on macro and microstructural parameters, as well as the consequent influence on the fi
Publicado em: 2009
-
4. Microestrutura de solidificação e propriedades mecanicas de ligas Sn-Zn para soldagem e recobrimento de superficies / Solidification microstructure and mechanical properties of Sn-Zn alloys for welding and deposition
Sabe-se que existem tendências de leis e diretrizes que restringem o uso e aplicação de certas substâncias perigosas utilizadas em processos de fabricação de componentes em geral. Como exemplo, podem-se citar produtos contendo cádmio, mercúrio, cromo hexavalente, bifenilos polibromatos, éteres difenil-polibromato e chumbo. Devido a essas restriçõe
Publicado em: 2008
-
5. Analise termica na solidificação de ferros fundidos cinzentos hipoeuteticos / Thermal analysis on solidification of hypoeutectic gray cast iron
Thermal analysis is a widely used method for metallurgical process control and investigation of alloy composition of cast irons in foundry practice. A reliable means of rapidly evaluating the composition of cast irons is available by the Carbon-Equivalent technique, which is based on the change in thermal arrest temperature of the liquidus as the sample of m
Publicado em: 2007
-
6. Cellular structures, cellular/dendritic transition and dendritic structures during transient unidirectional solidification / Estruturas celulares, transição celular/dendritica e estruturas dendriticas na solidificação unidirecional transitoria
As morfologias das estruturas de solidificação, caracterizadas principalmente por arranjos celulares e dendríticos, e suas grandezas representadas por espaçamentos celulares e dendríticos primários, secundários e terciários, controlam os perfis de segregação e a formação de segundas fases dentro das regiões intercelulares ou interdendríticas, q
Publicado em: 2007