Ultrasonic Transducers
Mostrando 1-12 de 23 artigos, teses e dissertações.
-
1. ENERGY EFFICIENCY OF A CENTER PIVOT IRRIGATION SYSTEM
ABSTRACT This study aimed to evaluate the energy efficiency of a center pivot irrigation system operating in a terrain of variable topography. Values of Pumping Energy Efficiency (PEE), Supply Energy Efficiency (SEE), Global Energy Efficiency (GEE) and Specific Energy (Es in kWh m-3) computed at 18 different angular positions of the lateral line were used as
Eng. Agríc.. Publicado em: 2018-04
-
2. Desenvolvimento de um software em ambiente MATLAB para simulação de campo ultrassônico = : Development of a MATLAB environment software for simulation of ultrasonic field / Development of a MATLAB environment software for simulation of ultrasonic field
O estudo do campo acústico gerado por um transdutor ultrassônico é fundamental para sua construção e caracterização, pois permite prever qual será seu comportamento antes mesmo de ser construído e indica se ele realmente é viável para aplicação para a qual foi projetado, e se são necessárias modificações para que se comporte como o esperado.
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 10/07/2012
-
3. Acoustic beam modeling of ultrasonic transducers and arrays using the impulse response and the discrete representation methods
The impulse response of the velocity potential and the discrete representation methods were used in order to model the acoustic field radiated by ultrasonic transducers and arrays. The first method deals with the calculation of the exact impulse response, in which solutions are possible only for simple geometries, such as the circular piston. The second meth
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2011-12
-
4. Otimização topológica de transdutores piezelétricos com gadação funcional de material: projeto, simulação, análise e fabricação. / Topology optimization of piezoelectric transducers considering functionally graded material: design, simulation, analysis and fabrication.
Piezoelectric materials generate displacements when they are excited by electrical potential and electrical potential when they are excited by force or pressure. These materials are widely applied in Precision Mechanics, Mechatronics, and Ultrasonic imaging areas. On the other hand, Functionally Graded Materials (FGM) are advanced materials, whose properties
Publicado em: 2010
-
5. Analysis of 1-3 piezocomposite and homogeneous piezoelectric rings for power ultrasonic transducers
Some power ultrasonic transducers, such as Tonpilz transducers, require high-power transmitting capability as well as broadband performance. Optimized vibrational modes can achieve these requirements. This work compares the resonant characteristics and the surface vibration modes between a homogeneous piezoelectric ring and a 1-3 piezocomposite ring, both us
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2009-12
-
6. Acionamento de elemento ceramicos de tansdutores de ultra-som : circuitos de controle, de transmissão e de recpção / Ultrasound ceramic transducer arrays : control, transmission and reception circuits
Os equipamentos de imagem por ultra-som associam diferentes técnicas e provêm informações não só das estruturas anatômicas como também do estado funcional dos diversos sistemas, em tempo real, com excelente qualidade de imagem. Isto se deve ao desenvolvimento de transdutores cada vez mais aprimorados e, ainda, da utilização de eletrônica digital,
Publicado em: 2009
-
7. Desenvolvimento de técnicas para avaliação de combustíveis nucleares tipo placa pelo método de ensaio por ultra-som
One of the most important steps in the fabrication processes of plate type nuclear fuels, intended to be used in research reactors or naval propulsion, is the development of nondestructive testing (NDT) methods and techniques for their quality assessment during fabrication and post-irradiation analysis. Those tests can contribute to detect discontinuities su
Publicado em: 2008
-
8. Método de otimização topológica aplicado ao projeto de sonotrodos para transdutores piezelétricos. / Topology optimization method applied to the design of transducers sonotrodos piezoelectric.
This work aims at the development of a method based on Topology Optimization to design a mechanical structure, called sonotrode, which is a device usually connected to a high power piezoelectric transducer (mechanical device capable of converting electric energy into mechanical displacement or vice-versa). A sonotrode transmits mechanical vibrations of a pie
Publicado em: 2008
-
9. Development of an automatic mechanism to cut piezoelectric ceramics using abrasive wire. / Desenvolvimento de um mecanismo automático de corte por fio abrasivo de cerâmicas piezelétricas.
The objective of this work is to describe one great and simple mechanism that is capable of machining PZT ceramic by wear. That mechanism will be used to produce piezocomposites transducers more easily by the "Dice and Fill" method. This work also explains how the ceramic material can be worn and which variables are important in this wear. It is also present
Publicado em: 2008
-
10. Study of the cutting process of piezoelectric ceramics with diamond blades for the manufacturing of piezocomposites. / Estudo do processo de corte de cerâmicas piezelétricas com discos adiamantados para a fabricação de piezocompósitos.
This work presents a study of the diamond blade dicing of piezoceramic slabs to fabricate piezocomposites by dicing and fill process. A diamond blade dicing machine is designed according the needs of the dicing and fill process to produce piezocomposites which requires dicing with diamond blades as thin as 30µm. The dicing machine has a high speed (up to 60
Publicado em: 2007
-
11. Ultrasonic characterization of composite materials. / Caracterização de materiais compostos por ultra-som.
In this work, two ultrasonic non destructive techniques were implemented in a water tank and used to determine the elastic constants of glass-epoxy composites samples. The first is the through-transmission technique implemented with a pair of ultrasonic transducers. The second is the back-reflection technique that uses a single transducer in pulse-eco mode.
Publicado em: 2006
-
12. SPECIFICATIONS OF PROJECT FOR MEASUREMENT WIND SPEED USING ULTRASONIC TRANSDUCERS WITH THE METHOD OF DIFFERENCE IN STAGE / ESPECIFICAÇÕES DE PROJETO PARA MEDIÇÃO DE VELOCIDADE DE VENTO UTILIZANDO ANEMÔMETRO ULTRASÔNICO COM O MÉTODO DE DIFERENÇA DE FASE
Apresenta-se neste trabalho o método do tempo de trânsito para determinação da velocidade do vento utilizando transdutores ultra-sônicos. Apresentam-se as técnicas da diferença de fase e detecção de limiar para determinação do tempo de trânsito deste método. Um estudo mais aprofundado é realizado para o método da diferença de fase de forma a
Publicado em: 2006