Uatr
Mostrando 1-12 de 19 artigos, teses e dissertações.
-
1. Evaluation of Techniques for Determination of Hydroxyl Value in Materials for Different Industrial Applications
ABSTRACT When some materials need to be characterized, the hydroxyl number (IOH) determination is especially useful, mainly for those applied in the aerospace field. Usually, this characterization is performed by wet chemistry, using methodologies involving several steps, such as derivatization. This is a time-consuming and costly step. On the other hand, wh
J. Aerosp. Technol. Manag.. Publicado em: 04/04/2019
-
2. Quantification of Aerospace Polymer Blends by Thermogravimetric Analysis and Infrared Spectrometry
ABSTRACT Ethylene-propylene-diene elastomer (EPDM) is employed as thermal insulation for rocket motors, as well as EPDM blends with ethylene vinyl acetate (EVA) have been used in the aerospace industry. The quantification of these blends is more common using Fourier Transform Infrared Spectrometry (FT-IR) by transmission mode, but without discussing sample p
J. Aerosp. Technol. Manag.. Publicado em: 07/01/2019
-
3. Quantification by FT-IR (UATR/NIRA) of NBR/SBR blends
Abstract Rubber blends are important materials in automotive industry, as well as in other sectors. However, there are implications when suitable use of a polymer in an artifact is not made. In the automotive area, for example, the use of an elastomer without the fuel resistance requirement would result in component degradation, potential fuel leakage, and
Polímeros. Publicado em: 29/11/2018
-
4. UATR and NIRA evaluation in the quantification of ATBC in NC blends
Abstract The paint industry requires rapid and accurate methodologies of raw materials qualitiy controls. For example, the evaluation of the suitable ratio of binary mixtures of polymer/plasticizer such as nitrocellulose (NC)/acetyl tributyl citrate (ATBC) must be done, since this ratio is directly related to the performance of the final product. However, t
Polímeros. Publicado em: 10/07/2018
-
5. Characterization of additives in NR formulations by TLC-IR (UATR)
Abstract It is a well-established fact that rubber accelerator is essential to provide solution in different sectors. However, there is a reversal process which can reduce the material performance. Sulfur accelerators donors and organic peroxides have been presented as a solution to the problem. The methodology development that can separate or characterize
Polímeros. Publicado em: 10/07/2018
-
6. FT-IR methodology (transmission and UATR) to quantify automotive systems
Abstract When using Fourier transform infrared spectroscopy (FT-IR) under the qualitative aspect for characterization of polymer blends, often a simple identification of each one of the existing polymers in the blend does not justify the material failure since different amounts of each component may result in different mechanical properties, which should be
Polímeros. Publicado em: 15/03/2018
-
7. TLC/IR (UATR) off-line coupling for the characterization of additives in EPDM rubber compositions
Abstract The knowledge of the components that constitutes a rubber composition is important to justify the properties of the final device, particularly when it comes to elastomeric compositions used in the aerospace industry. The development of methodologies that can detect components, specially the smallest proportion of the rubbers composition is a constan
Polímeros. Publicado em: 04/03/2016
-
8. Separação e identificação de aditivos em tinta por TLC-IR/ UATR e extração seletiva
Resumo Vários aditivos são incorporados nas formulações de tintas para evitar defeitos no revestimento e melhorar o desempenho nas aplicações, constituindo, desse modo, um sistema complexo. A caracterização de uma composição pode ser realizada por separações física/ química e técnicas analíticas instrumentais. A análise de multicomponentes �
Polímeros. Publicado em: 19/01/2016
-
9. Determinação por FT-IR de transmissão e reflexão (UATR) de etileno e propileno em EPDM
Foi desenvolvida uma metodologia para a determinação dos teores de etileno (ET) e propileno (P) em amostras de borracha (elastômero puro, crua e vulcanizada), à base do copolímero de etileno-propileno-dieno monômero (EPDM), por espectroscopia no infravermelho com transformada de Fourier (FT-IR) de reflexão total atenuada universal (UATR) e de transmis
Polímeros. Publicado em: 2014-12
-
10. Técnicas FT-IR (PAS, UATR e Objetiva ATR) Aplicadas à Caracterização de EPDM Modificada com Plasma
Técnicas FT-IR (UATR, PAS e MIC, com objetiva ATR) foram escolhidas para a caracterização da superfície da borracha de EPDM vulcanizada, após tratamento em plasma de Ar/O2 e N2/H2/Ar gerado em micro-ondas. Após tratamento, grupos oxigenados foram detectados por UATR e MIC/FT-IR, com objetiva ATR para as duas misturas gasosas, e possíveis grupos nitrog
Polímeros. Publicado em: 10/06/2014
-
11. Quantificação por NIR/MIR de resina poliuretânica em misturas binárias com nitrocelulose utilizadas em tintas
Foi elaborada uma nova metodologia nas regiões do infravermelho médio (MIR) e do infravermelho próximo (NIR), usando-se técnicas de Reflexão e/ou Transmissão para a determinação do teor de resina poliuretânica (PU) em misturas binárias com nitrocelulose (NC), utilizadas em formulações de tintas. A técnica de Reflexão Total Atenuada Universal (U
Polímeros. Publicado em: 20/05/2014
-
12. Análise por FT-IR (UATR e PAS) de microbicidas em filmes poliméricos de tintas comerciais
Este trabalho mostra a avaliação de duas técnicas de espectroscopia no infravermelho por transformada de Fourier (FT-IR), Universal Reflexão Total Atenuada (UATR) e Detecção Fotoacústica (PAS), para a caracterização dos microbicidas, OIT, carbendazim e diuron, mais comuns em tintas acrílicas imobiliárias, levando-se em conta as características de
Polímeros. Publicado em: 08/04/2014