Treatment Of Surface
Mostrando 1-12 de 3315 artigos, teses e dissertações.
-
1. Bioactive SiO2-K2O-CaO-P2O5 glass-ceramic scaffold prepared using polyurethane foam template
Abstract A glass-ceramic in the SiO2-K2O-CaO-P2O5 quaternary system was prepared by substituting the Na2O component with K2O to avoid Na2Ca2Si3O9 formation upon thermal treatment since this phase decreases apatite formation kinetics on glass material. To form the glass-ceramic, a modified sol-gel method involving solution precipitation, followed by reagents
Cerâmica. Publicado em: 2023
-
2. Morphology Behavior of Copper Films Deposited after Wet Surface Treatment on Polished Alumina
In this paper, a pre-treatment process for electroless copper (Cu) deposition on the polished alumina (Al2O3) 99.9% and the behavior of Cu plating by electroless process after Al2O3 surface treatment were explored. Our work was carried out by changing the roughness of Al2O3 through micro-etching (coarsening), nucleation its surface by a two-step method (sens
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
3. Iron Cobaltite (FeCo2O4) Nanocatalysts for Water-Oxidation: Effects of Annealing Temperature on Catalytic Properties
The development of efficient, stable, and non-precious metal water oxidation catalysts (WOCs) is a matter of importance for sustainable energy research. In this work, iron cobaltite (FeCo2O4) nanoparticles were prepared by the coprecipitation method, and we present the effect of heat treatment (250, 350, 450, 650 and 900 °C) on the catalytic properties. Cat
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
4. Zeólita NaA sintetizada sobre fibra de vidro como estratégia para otimização do abrandamento de águas duras
NaA ZEOLITE SYNTHESIZED OVER FIBERGLASS AS A STRATEGY FOR OPTIMIZING HARD WATER SOFTENING. Zeolite NaA has been successfully synthesized over glass fiber surface previously activated by alkaline treatment. By varying the time of the treatment and the amount of silica and alumina precursors used in the reaction mixture, a sample with higher zeolite concentrat
Química Nova. Publicado em: 2022
-
5. Feasibility of a snowball sampling survey to study active surveillance for thyroid microcarcinoma treatment among endocrinologists and surgeons of Brazil
Abstract Objectives: This study aims to investigate if a sampling method using virtual networks is feasible to survey AS adoption among this “hard-to-reach” population of Brazilian doctors. Methods: An online piloted 11-point structured survey questionnaire (designed using Googleforms®) probed the actual treatment patterns for adult patients with PTMC
Brazilian Journal of Otorhinolaryngology. Publicado em: 2022
-
6. COMPREENDENDO OS MECANISMOS DE CORROSÃO DE LIGAS DE AL-CU-LI: UMA INVESTIGAÇÃO ATRAVÉS DE TÉCNICAS ELETROQUÍMICAS GLOBAIS E LOCAIS
In this study, the corrosion mechanism of an Al-Cu-Li alloy manufactured by two different treatment routes (T3 and T851) was evaluated by immersion and electrochemical tests in solutions containing chloride ions (Cl-). For both alloys, the formation of cavities on the surface was associated with micrometer-sized intermetallics (IM’s), however, in addition
Química Nova. Publicado em: 2022
-
7. Intra- and interobserver agreement of histopathological findings in pediatric patients with eosinophilic esophagitis
Abstract Objective: To assess intra- and interobserver agreement among non-expert pathologists in identifying features of the eosinophilic esophagitis histologic scoring system (EoEHSS) in pediatric patients. Patients and methods: The authors used 50 slides from patients (aged 1-15 years; 72% male) with EoE. EoEHSS evaluates eosinophilic inflammation and o
Jornal de Pediatria. Publicado em: 2022
-
8. Production of nanostructured crystalline composite using residual ashes from flocculated sludge burning process in a poultry slaughterhouse wastewater treatment system
Abstract Nanostructured crystalline composite (activated carbon) was synthesized from residual ashes of the burning process of the sludge generated in the flotation step of a poultry slaughterhouse and was used for Allura red dye adsorption. The ashes were chemically activated using two types of reagents, H2O2 and H3PO4, and the structure, morphology, and su
Cerâmica. Publicado em: 2022
-
9. Oral pilocarpine for the treatment of dry eye in patients with Sjögren’s syndrome
RESUMO Objetivos: Avaliar o alívio de sintomas e sinais relacionados à secura ocular e na qualidade de vida de pacientes com síndrome de Sjögren tratados com o uso oral de pilocarpina na dose diária de 20mg. A frequência dos efeitos colaterais relatados com o tratamento também foi estudada. Métodos: Trata-se de estudo cruzado e placebo-controlado,
Arquivos Brasileiros de Oftalmologia. Publicado em: 2022
-
10. Additive Manufacturing towards the Fabrication of Greener Electrochemical Sensors for Antioxidants
Additive manufacturing is an emerging tool that has contributed to the sustainable fabrication of devices in several areas based on the concept of “zero waste”. Considering extrusion-based manufacturing (or 3D printing), polylactic acid (PLA) has been highlighted due to its biodegradability, obtention from renewable sources, and compatibility for 3D prin
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
11. Expansion of cord blood stem cells in fibronectin-coated microfluidic bioreactor
ABSTRACT Background: Hematopoietic stem/progenitor cell transplantation is the main treatment option for hematological malignancies and disorders. One strategy to solve the problem of low stem cell doses used in transplantation is pre-transplant expansion. We hypothesized that using fibronectin-coated microfluidic channels would expand HSPCs and keep self-r
Hematology, Transfusion and Cell Therapy. Publicado em: 2022
-
12. Soil stabilization with lime for erosion control in solar plants
Abstract The installation of solar parks requires extensive areas and results in soil erosion in many cases. One suitable solution is applying lime to improve soil characteristics, such as mechanical strength, stability, workability, durability, and internal and surface erosion resistance. This soil treatment is of particular importance when dealing with hyd
REM, Int. Eng. J.. Publicado em: 2021-09