Toughness
Mostrando 1-12 de 299 artigos, teses e dissertações.
-
1. Influence of the addition of niobium oxide on the properties of fused aluminum oxide used in abrasive tools
Abstract Fused alumina is a material used in the manufacturing of abrasive tools, due to its high fusion point, great hardness, and mechanical toughness. In this context, this study addressed the influence of niobium addition on the properties of fused alumina for abrasive applications. A comparison was also made between this oxide and the brown fused alumin
Cerâmica. Publicado em: 2022
-
2. Mechanical properties and fractography of cement-based composites reinforced by natural piassava and jute fibers
Abstract Today’s demand for environmentally friendly and energy-efficient solutions to the construction industry has driven researchers to match natural resources with traditional technics to develop new building technologies. However, there are literature limitations about the correlation of fiber-matrix interface with the failure of natural fibers in mor
Cerâmica. Publicado em: 2022
-
3. Isolation and characterization of moringa oleifera l. Flower protein and utilization in functional food bars
Abstract Moringa the miracle tree is rich source of protein and its protein content are comparable with meat protein. In the current study protein was isolated from moringa flowers and utilized in preparation of bars. Physicochemical analysis like texture, color, caloric value, water activity, pH and sensory characteristics were determined to evaluate the nu
Food Sci. Technol. Publicado em: 2021-09
-
4. Influence of sintering parameters on the microstructure and mechanical properties of nanosized 3Y-TZP ceramics
Abstract The fracture toughness of 3Y-TZP ceramics obtained from a nanocrystalline powder with an optimized microstructure and highly transformable tetragonal grains was investigated. Samples of ZrO2-3 mol% Y2O3 were sintered at temperatures between 1250 and 1400 °C, with isothermal holding times of up to 16 h. Samples sintered at 1250 °C exhibited relativ
Cerâmica. Publicado em: 2021-03
-
5. On the effect of interrupted ageing (T6I4) on the mechanical properties of AA6351 and AA7050 alloys
Abstract The mechanical properties of age-hardenable aluminum alloys are strongly influenced by the volume fraction, size and spacing of hardening precipitates. In addition, researches have shown that interrupted ageing (T6I4) could benefit the hardening response of these alloys. Interrupted ageing is a term generally used for the microstructural developmen
REM, Int. Eng. J.. Publicado em: 2021-01
-
6. Effect of LZSA glass-ceramic addition on the erosive wear of pressureless sintered alumina
Abstract This study aims to evaluate the influence of the 11.6Li2O-16.8ZrO2-68.2SiO2-3.4Al2O3 (mol%) glass-ceramic addition (LZSA, 7 to 21 vol%) on the erosive wear of alumina in comparison to values of pure alumina obtained from the literature. Thus, composites were prepared from three commercial alumina of different initial particle sizes. Specimens were o
REM, Int. Eng. J.. Publicado em: 2020-06
-
7. ESTIMATION OF WOOD TOUGHNESS IN BRAZILIAN TROPICAL TREE SPECIES
ABSTRACT Wood has been used for several purposes such as in civil and rural construction. Knowing wood mechanical behavior under short-term loading is essential for safer structural designs. However, wood toughness is a mechanical property little investigated for this purpose. Thus, this study aimed to evaluate, using exponential and polynomial regression mo
Eng. Agríc.. Publicado em: 2020-04
-
8. Post-elastic Deformation Characteristics of Hybrid Fibre Reinforced Concrete Composites
Abstract The present study was focused on evaluating the strength and failure properties of hybrid micro-fibre concretes containing micro brass and steel fibre additions. Experimental tests were conducted on different hybrid fibre concretes containing aligned fibres in the direction of beam axis and the relative mechanical performance was compared to randoml
Lat. Am. j. solids struct.. Publicado em: 10/01/2020
-
9. Austenitic Grain Size Prediction in Hot Forging of a 20MnCr5 Steel by Numerical Simulation Using the JMAK Model for Industrial Applications
Yield strength and toughness in steels are directly associated with hot forging processes, especially by controlling austenitic grain size and cooling conditions. The phenomenological JMAK model in macroscale has been applied in different material classes to predict grain size after hot forming. However, on an industrial application, there is still a lack of
Mat. Res.. Publicado em: 05/12/2019
-
10. Characterization of Breast Meat Collected from Spent Lohmann Brown Layers in Comparison to Commercial Ross Broilers
ABSTRACT The objective of this study was to compare characteristics and properties of breast meat from spent Lohmann Brown layers (SP, 90 weeks old, n = 24) and those of commercial broilers (BR, 6 weeks old, n = 24). The breasts of both SP and BR were collected from a local processing plant, vacuum-packed in a plastic bag, and stored at -18ºC until further
Braz. J. Poult. Sci.. Publicado em: 25/11/2019
-
11. Mechanical Properties and Metallurgical Characterization of LM25/ZrO2 Composites Fabricated by Stir Casting Method
ABSTRACT Zirconia (ZrO2) dispersed aluminum alloy metal matrix composites produced by stir casting techniques. Using stir casting techniques, aluminium based composites with varying amounts of 3%, 6%, 9%, and 12% of zirconia by weight are fabricated. The prepared samples were subjected to physical, mechanical,tribiology and microstructure investigation. The
Matéria (Rio J.). Publicado em: 16/09/2019
-
12. Uma abordagem experimental e numérica para determinação de curvas de compressão para concreto simples e reforçados com fibras de aço
RESUMO A curva tensão-deformação do concreto é importante para o dimensionamento de estruturas, pois por meio dela é possível obter sua resistência à compressão, sua deformação de pico, o módulo de elasticidade e a tenacidade do concreto. Entretanto, essa é uma propriedade que não é comumente determinada nos ensaios de controle de qualidade do
Matéria (Rio J.). Publicado em: 16/09/2019