Three Phase Flow
Mostrando 13-24 de 198 artigos, teses e dissertações.
-
13. An innovative, simple, fast, and less toxic high-performance liquid chromatographic method for determination of prednisone in capsules
ABSTRACT Prednisone is an anti-inflammatory steroid drug widely used in clinical practice. However, no high-performance liquid chromatographic (HPLC) method has been described in the literature for the determination of prednisone in capsules until now. Thus, an HPLC method was developed using a C18 (250x4.0, 5 µm) column, with methanol:water (70:30) as mobi
Braz. J. Pharm. Sci.. Publicado em: 22/06/2017
-
14. Chemical degradation kinetics of fibrates: bezafibrate, ciprofibrate and fenofibrate
ABSTRACT Fibrates are drugs used for the treatment of hypertriglyceridemia and for the prevention of atherosclerosis. Three drugs in the fibrate class, ciprofibrate, fenofibrate and bezafibrate, were chosen for this study because their raw materials are readily available and because scientific publications on these compounds is limited. To evaluate their int
Braz. J. Pharm. Sci.. Publicado em: 2016-09
-
15. CONTINUOUS AND SEMICONTINUOUS REACTION SYSTEMS FOR HIGH-SOLIDS ENZYMATIC HYDROLYSIS OF LIGNOCELLULOSICS
Abstract An attractive operation strategy for the enzymatic hydrolysis of lignocellulosics results from dividing the process into three stages with complementary goals: continuous enzyme adsorption at low-solids loading (5% w/w) with recycling of the liquid phase; continuous liquefaction at high-solids content (up to 20% w/w); and, finally, continuous or sem
Braz. J. Chem. Eng.. Publicado em: 2015-12
-
16. Numerical Simulation of the Wake Structure and Thrust/Lift Generation of a Pitching Airfoil at Low Reynolds Number Via an Immersed Boundary Method
ABSTRACT: In this study, an accurate computational algorithm in the context of immersed boundary methods is developed and used to analyze an incompressible flow around a pitching symmetric airfoil at Reynolds number (Re = 255). The boundary conditions are accurately implemented by an iterative procedure applied at each time step, and the pressure is also upd
J. Aerosp. Technol. Manag.. Publicado em: 2015-09
-
17. Simulation of the solidification in a channel of a water-cooled glass flow
A computer simulation study of a laminar steady-state glass flow that exits from a channel cooled with water is reported. The simulations are carried out in a two-dimensional, Cartesian channel with a backward-facing step for three different angles of the step and different glass outflow velocities. We studied the interaction of the fluid dynamics, phase cha
Braz. J. Chem. Eng.. Publicado em: 2014-12
-
18. CFD and experimental investigation on the heat transfer characteristics of alumina nanofluids under the laminar flow regime
This study reports experimental and Computational Fluid Dynamics (CFD) investigations of the laminar convective heat transfer coefficient of Al2O3/water nanofluids in a circular tube under uniform and constant heat flux on the wall. Three different models including a constant physical properties single-phase (CP-SP) model, a variable physical properties sing
Braz. J. Chem. Eng.. Publicado em: 2014-06
-
19. The 3D CFD study of gliding swimmer on passive hydrodynamics drag
The aim of this study was to analyze the effect of depth on the hydrodynamic drag coefficient during the passive underwater gliding after the starts and turns. The swimmer hydrodynamics performance was studied by the application of computational fluid dynamics (CFD) method. The steady-state CFD simulations were performed by the application of k - omega turbu
Braz. arch. biol. technol.. Publicado em: 2014-04
-
20. Mathematical modeling of supercritical fluid extraction of oil from canola and sesame seeds
Mathematical modeling of supercritical fluid extraction of oil from canola and sesame seeds with a two-phase model was performed in this work. A model based on differential mass balance was used to correlate the experimental data. Different adsorption isotherm models (Henry, Freundlich and Brunauer, Emmet and Teller (BET)) were used to describe the equilibri
Braz. J. Chem. Eng.. Publicado em: 2013-03
-
21. Simultaneous determination of Pb and Cd in seafood by ICP OES with on-line pre-concentration by solid phase extraction with amberlite XAD-4 after complex formation with DDTP
An on-line method for Cd and Pb pre-concentration and simultaneous determination in acid digested seafood by inductively coupled plasma optical emission spectrometry (ICP OES) was developed. The on-line pre-concentration was based on the complex formation of the analytes with the ammonium salt of O,O-diethyldithiophosphate (DDTP) and using the Amberlite XAD-
Braz. arch. biol. technol.. Publicado em: 2013-02
-
22. Otimização da separação sólido-líquido em hidrociclones mediante modificações geométricas
Because of advantages such as low cost, simple structure, large capacity of suspension processing and small dimensions, hydrocyclones are widely used for separating dispersed phase (liquid or solids) from continuous one. The shape and size of a hydrocyclone has a decisive effect on the internal flow structure of the continuous phase, and therefore, the separ
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 27/11/2012
-
23. Simulação trifásica por técnicas de CFD da combustão de carvão mineral em leito fluidizado circulante / Three-phase CFD simulation of coal combustion in a circulating fluidized bed reactor
A queima de carvão mineral em Leito Fluidizado Circulante (CFBC) tem interessado pesquisadores por várias décadas, tendo sido propostos inúmeros modelos matemáticos que visam descrever os complexos fenômenos de transferência de massa, energia e quantidade de movimento deste sistema gás-sólido. A fase sólida é uma mistura de materiais inertes, como
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 27/09/2012
-
24. Metodologia para aplicar LES ao craqueamento catalítico fluido em um reator riser industrial / Large eddy simulation application methodology to a fluid catalytic cracking industry reactor
The main objective of this thesis is to propose a methodology in how to apply Large Eddy Simulation (LES) on a unit of catalytic cracking. In order to achieve this, it was proposed an alternative way of constructing the computational mesh, by using quasi-uniform meshes. The proposed meshes were implemented to minimize the computational effort and procedure f
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 14/09/2012