Thickness Determination
Mostrando 1-12 de 91 artigos, teses e dissertações.
-
1. Biometria, características físicas e absorção de água de sementes de Enterolobium maximum Ducke
Resumo Enterolobium maximum Ducke é uma Fabaceae (Mimosoideae), arbórea, de crescimento rápido, com comportamento excelente para reflorestamento e recomposição de áreas degradadas. Objetivou-se com este trabalho estudar a biometria, a absorção de água e a qualidade fisiológica de sementes de Enterolobium maximum. Foram analisados: comprimento, larg
Ciênc. Florest.. Publicado em: 02/12/2019
-
2. Phenotypic correlation of characteristics in the gilt performance test with an average number of live-born piglets through all achieved births, during the reproductive exploitation
RESUMO A eficácia reprodutiva das porcas dita o nível de rentabilidade da própria produção, e o momento do teste e seleção de leitoas para reprodução (como os pais de uma geração futura) representa um momento muito importante. Dado o fato de que a seleção de leitoas para criação é parcialmente baseada no ganho de peso no teste, neste estudo e
Arq. Bras. Med. Vet. Zootec.. Publicado em: 10/10/2019
-
3. Host tree bark traits and development of reintroduced Cattleya intermedia (Orchidaceae) plants in Southern Brazil
Resumo As características das cascas de árvores hospedeiras podem influenciar na distribuição e no desenvolvimento de epífitos. Amostras de casca foram suspensas em 10 e 20 mL de água destilada por 1, 4 e 24 h, para avaliação de métodos para a determinação do pH. Cascas de Myrcia brasiliensis, M. glabra e Myrsine coriacea hospedeiras de Cattleya i
Rodriguésia. Publicado em: 03/10/2019
-
4. Distribuição das características clínicas do fenótipo gengival em pacientes saudáveis
Resumo Introdução A determinação do fenótipo gengival possibilita compreender melhor as variações e diferenças clínicas intra e interindividuais dos tecidos periodontais saudáveis. Objetivo O objetivo deste estudo foi determinar os perfis do fenótipo gengival e compará-los em diferentes regiões da cavidade oral, levando em consideração parâ
Rev. odontol. UNESP. Publicado em: 23/09/2019
-
5. Determination of phases and residual stresses after martensitic transformation induced by rolling in 304L stainless steel
RESUMO O aço inoxidável austenítico 304L é suscetível à transformação martensítica induzida por deformação. Esta transformação de fases depende da temperatura, assim como do modo, taxa e nível de deformação. Neste trabalho as fases e tensões residuais de um aço TRIP 304L, em que a transformação martensítica foi induzida por laminação a
Matéria (Rio J.). Publicado em: 16/09/2019
-
6. Optimized design of RC deep beams based on performance metrics applied to strut and tie model and in-plane stress conditions
Abstract Deep beams do not behave according to classical beam theory. The nonlinearity of strain distribution within these elements requires application of strut and tie models (STM) or other alternatives to evaluate the complex stress field. Although the design of these elements is a common task for structural engineers, limited research is found on assessi
Lat. Am. j. solids struct.. Publicado em: 22/08/2019
-
7. Investigation on influence of stamp forming parameters on formability of thermoplastic composite
Abstract Advanced fabric reinforced polymer composites find extensive applications in aerospace and structural fields due to their high mechanical properties. A novel stamp forming technique finds extensive use in the hemispherical forming of thermoplastic composites. This study investigates the influence of stamp forming parameters on the formability of th
Polímeros. Publicado em: 29/11/2018
-
8. Multiscale Failure Analysis of Cylindrical Composite Pressure Vessel: A Parametric Study
Abstract This paper deals with a multiscale approach to model thick-walled laminate cylinder with internal pressure. Micromechanics defines material homogenization considering two steps: determination of equivalent properties of each lamina from matrix and fiber properties according to the Mori-Tanaka model for elastic properties and to the Bridging model fo
Lat. Am. j. solids struct.. Publicado em: 29/10/2018
-
9. Optimal design of beam-column connections of plane steel frames using the component method
Abstract This paper presents a methodology for optimization of beam-column connections of plane steel frames. The objective is to obtain beam- column connections mechanically more efficient and with minimum cost by determination of the optimal dimensions for the components of the connection; satisfying mechanical constraints associated with the bending momen
Lat. Am. j. solids struct.. Publicado em: 29/10/2018
-
10. Métodos temporales para determinar deformaciones límite en chapas metálicas
ABSTRACT The forming limit diagram (FLD) –broadly used to characterize sheet-metal formability– is made by means of strain measurement over the surface of stretched samples and the subsequent determination of limit-strain values associated with the onset of necking. Currently, researchers can make strain measurements with digital image-correlation analys
Matéria (Rio J.). Publicado em: 19/07/2018
-
11. Mechanical characterization of PM aluminum composites by small punch test
ABSTRACT In this work Small Punch Test (SPT) was applied to study the mechanical behavior of ultrafine-grained Al-Al2O3metal matrix composites (MMCs) fabricated in situ via powder metallurgy route (HITEMAL®). Such MMCs show attractive mechanical properties, enhanced creep performance and increased thermal stability at elevated temperatures, not normally ass
Matéria (Rio J.). Publicado em: 19/07/2018
-
12. Three-Dimensional Determination of Superposed Helical Wires Constraint Ability
Abstract A three-dimensional theoretical model for predicting the maximum force sustained by a flexible line wound around a rigid cylindrical body is developed based on Clebsch-Kirchhoff equilibrium equations, considering its bending rigidity, no sliding, modified non-linear frictional law in terms of stress and an external pressure exerted on the line. Lik
Lat. Am. j. solids struct.. Publicado em: 03/05/2018