Thermal Processing
Mostrando 13-24 de 293 artigos, teses e dissertações.
-
13. Effects of gamma radiation on the stability and degradation kinetics of phenolic compounds and antioxidant activity during storage of (Oryza sativa L.) black rice flour
Abstract The effects of gamma radiation (0, 1, 2 and 3 kGy) were used to evaluate the stability and thermal degradation kinetics of anthocyanins, as well as the stability of total phenolic compounds (TPC) and antioxidant activity at different temperatures (4, 25, 35 and 45 °C) during the storage (0, 30, 60, 90 and 120 days) of black rice flour. This flour c
Braz. arch. biol. technol.. Publicado em: 28/03/2019
-
14. Influence of Processing Variables on Clay-Based Ceramic Formulations
The properties of ceramic materials and microstructural changes are dependent on the raw materials from which they are made and on the manner in which they are processed, from the composition to the established thermal treatment, heating rate, and firing temperature. In this study, the influence of some processing parameters (formulation, maturation time, an
Mat. Res.. Publicado em: 11/03/2019
-
15. Densification and microstructure of Si3N4-TiN ceramic composites
Abstract Silicon nitride is a ceramic material widely used in various structural applications at high temperatures owing to its excellent combination of mechanical and thermal properties. To increase the application of Si3N4, many researches have been developed to improve its fracture toughness and processing conditions. In this study, the sintering and micr
Cerâmica. Publicado em: 2019-01
-
16. PCL/ZnO Bio-friendly Films as Food Packaging Material.Thermal and morphological analysis
ABSTRACT Films of Poly(?-caprolactone) (PCL) and PCL/Zinc Oxide (ZnO) were obtained by solution processing. Thermal behaviour and morphological structure were analysed by means of Thermogravimetry (TGA), Differential Scanning Calorimetry (DSC), Optical Microscopy (OM) and Scanning Electron Microscopy (SEM). The addition of ZnO to PCL decreased the degradatio
Matéria (Rio J.). Publicado em: 06/12/2018
-
17. Kinetics and Thermodynamics of Thermal Inactivation of β-Galactosidase from Aspergillus oryzae
ABSTRACT For optimization of biochemical processes in food and pharmaceutical industries, the evaluation of enzyme inactivation kinetic models is necessary to allow their adequate use. Kinetic studies of thermal inactivation of β-galactosidase from Aspergillus oryzae were conducted in order to critically evaluate mathematical equations presented in the lite
Braz. arch. biol. technol.. Publicado em: 13/09/2018
-
18. Estabilidad térmica de aleaciones de magnesio Procesadas por Friccion-Agitación (FSP)
ABSTRACT Superplasticity is defined by an extended plastic deformation previous to fracture, generally at high temperatures. In the mode of fine structures superplasticity, grain boundary sliding is the controlling mechanism. To achieve this fine grained structure it could be used any Severe Plastic Deformation (SPD) process like Friction Stir Processing (FS
Matéria (Rio J.). Publicado em: 19/07/2018
-
19. Movimiento de las interfases durante la solidificación horizontal de aleaciones estaño-zinc
ABSTRACT Solidification processing is one of the important routes to produce materials, especially metals and alloys. The parameters for the transformation from liquid to solid, such as the temperature gradient, the growth rate, the cooling rate, the interphase velocity, vary from process to process and in one process also as a function of time and space. Th
Matéria (Rio J.). Publicado em: 19/07/2018
-
20. Photoacoustic-based thermal image formation and optimization using an evolutionary genetic algorithm
Abstract Introduction For improved efficiency and security in heat application during hyperthermia, it is important to monitor tissue temperature during treatments. Photoacoustic (PA) pressure wave amplitude has a temperature dependence given by the Gruenesein parameter. Consequently, changes in PA signal amplitude carry information about temperature varia
Res. Biomed. Eng.. Publicado em: 28/05/2018
-
21. Hybrids membranes with potential for fuel cells – Part 3: extruded films of nanocomposites based on sepiolite and PC/sulfonated PC blends
Abstract Fuel Cells based in polymers are an alternative for the conventional energetic matrices. However, materials currently available still present disadvantages to overcome. Membranes of polycarbonate (PC)/sulfonated polycarbonate (PCs) blend/sepiolite nanocomposites have previously been studied by the authors, resulting in good mechanical properties an
Polímeros. Publicado em: 21/05/2018
-
22. Toughening of polystyrene using styrene-butadiene rubber (SBRr) waste from the shoe industry
Abstract The vulcanized rubber waste from the shoe industry causes environmental damage when it is incinerated or inappropriately discarded, turning this into a problem of major concern. Therefore, this study had as the main objective the Polystyrene (PS) toughening using different contents of white vulcanized styrene-butadiene rubber (SBRr) waste produced i
REM, Int. Eng. J.. Publicado em: 2018-04
-
23. Production of TiO2 Coated Multiwall Carbon Nanotubes by the Sol-Gel Technique
In recent years, efforts in developing high strength-low density materials are increasing significantly. One of the promising materials to attend this demand is the carbon nanotube (CNT), to be used mainly as a reinforcing phase in lightweight metal matrix composites (MMC). In the present work, the sol-gel technique has been employed to obtain TiO2 coating o
Mat. Res.. Publicado em: 18/12/2017
-
24. Characterization of Silica Produced from Rice Husk Ash: Comparison of Purification and Processing Methods
As a byproduct of the combustion of rice husk to generate energy, rice husk ash (RHA) is formed by silica and carbon, apart from small amounts of other constituents. Several treatments can be used to increase the purity of the silica obtained, or even produce pure silica. The present study tested the efficiency of different techniques to obtain silica, chara
Mat. Res.. Publicado em: 30/10/2017