Thermal Load
Mostrando 13-24 de 150 artigos, teses e dissertações.
-
13. Estudio de propiedades mecánicas locales de uniones soldadas por fricción agitación (FSW) en AA6061-T6 mediante Small Punch Test (SPT)
ABSTRACT Friction Stir Welding (FSW) is a solid state process that has reach a strong technological impact in welding of aluminum alloys. Among its advantages, it may include the ability of joining materials that are difficult to weld by fusion. In welding of heat treatable aluminum alloys, some degradation in metallurgical properties is observed, so welds s
Matéria (Rio J.). Publicado em: 19/07/2018
-
14. Análisis de la forma de onda de señales de Emisión Acústica producida en ensayos de interfaces ceramo-metálicas
ABSTRACT The study of ceramic-metal interface is of special importance in odontology area by the current demand about dental prostheses, so it is very important to be more and more similar to natural teeth and with a long service life. With the aim of assessing in detail the behavior of ceramic-metal interface used in dental restorations systems, in this wor
Matéria (Rio J.). Publicado em: 19/07/2018
-
15. SIMILITUDE AND THERMAL PERFORMANCE ON NON-CONVENTIONAL ROOFS
ABSTRACT The objectives of this study were to evaluate the thermal comfort and the similitude between prototypes and reduced models, using non-conventional coverage with green roof and expanded clay aggregate, supported on wood frame structure. For this, were determined the Black Globe Temperature and Humidity Index (BGHI), the Human Discomfort Index (HDI),
Eng. Agríc.. Publicado em: 2018-01
-
16. The Back Stress Behavior Study Analyzed in Residual Stress of Welded Naval Plates in Different Lamination Directions and Different Thermal Contributions
The lamination process adds the anisotropy characteristic in the final product. This anisotropy influences the yield strength according to the direction in question, the difference between the value of the yield tension in one direction and the value of the yield tension in another direction referred to as the back stress. Naval plates were welded by the GMA
Mat. Res.. Publicado em: 18/12/2017
-
17. Rolling Contact Fatigue Life of Rail for Different Slip Conditions
Abstract A three-dimensional elastic-plastic finite element analysis (FEA) is carried out to estimate the rolling contact fatigue (RCF) crack initiation life for varied slip range on the rail arising from operational variations. The wheel load produces Hertzian contact pressure. Variation in engine traction induces slip variations that evolves thermal load i
Lat. Am. j. solids struct.. Publicado em: 2017-12
-
18. Microstructure and Properties of Cu-ZrO2 Nanocomposites Synthesized by in Situ Processing
In situ chemical reaction method was used to synthesize Cu-ZrO2 nanocomposite powders. The process was carried out by addition of NH4(OH) to certain amount of dispersed Cu(NO3)2·3H2O and ZrOCl2·8H2O solution. Afterwards, a thermal treatment at 650 °C for 1 h was conducted to get the powders of CuO and ZrO2 and remove the remaining liquid. The CuO was then
Mat. Res.. Publicado em: 23/10/2017
-
19. Concreto de Ultra Alto Desempenho Reforçado com Fibras (CUADRF): análise das propriedades do material e especificações de projeto
RESUMO Este artigo faz uma análise dos recentes avanços nas pesquisas das propriedades do CUADRF e dos seus procedimentos normativos. O CUADRF pode ser definido como um novo material, com propriedades muito superiores (grande ductilidade, baixíssima permeabilidade, altíssima capacidade resistente à compressão e elevada tenacidade) às do concreto conve
Rev. IBRACON Estrut. Mater.. Publicado em: 2017-08
-
20. Nonlinear Analysis on Buckling and Postbuckling of Stiffened FGM Imperfect Cylindrical Shells Filled Inside by Elastic Foundations in Thermal Environment Using TSDT
Abstract The main aim of this paper is to investigate analytically nonlinear buckling and post-buckling of functionally graded stiffened circular cylindrical shells filled inside by Pasternak two-parameter elastic foundations in thermal environments and under axial compression load and external pressure by analytical approach. Shells are reinforced by closel
Lat. Am. j. solids struct.. Publicado em: 2017-06
-
21. Misfit and fracture load of implant-supported monolithic crowns in zirconia-reinforced lithium silicate
Abstract Zirconia-reinforced lithium silicate (ZLS) is a ceramic that promises to have better mechanical properties than other materials with the same indications as well as improved adaptation and fracture strength. Objective In this study, marginal and internal misfit and fracture load with and without thermal-mechanical aging (TMA) of monolithic ZLS and
J. Appl. Oral Sci.. Publicado em: 2017-06
-
22. THERMAL EFFICIENCY OF DIFFERENT COVERAGE MATERIALS IN REDUCED MODELS OF ANIMAL HUSBANDRY FACILITIES: A CASE STUDY
ABSTRACT This study aimed to assess different combinations of coverage materials in reduced models of animal husbandry facilities based on thermal comfort indices. It was conducted in an experimental area of the Research Center in Ambience located in São Paulo State, Brazil (22°42′30″ S and 47°38′00″ W). The performance of ceramic and fiber-cement
Eng. Agríc.. Publicado em: 2017-06
-
23. PHYSIOLOGICAL RESPONSES OF DAIRY COWS AS A FUNCTION OF ENVIRONMENT IN HOLDING PEN
ABSTRACT This research aimed to assess the climatization configuration in a holding pen for dairy cattle considering physiological responses of animals and thermal comfort indexes. Experimental design consisted of 16 cows in a Latin square design containing four groups of four animals (G1, G2, G3 and G4) and four periods (P1, P2, P3 and P4), in which four en
Eng. Agríc.. Publicado em: 2017-04
-
24. Aplicações de um modelo semiempírico para o cálculo da fluência transiente em estruturas de concreto simples e armado submetidas a uma força de compressão centrada
Resumo Este artigo descreve um modelo semiempírico para o cálculo da fluência transiente em concretos simples e armado submetidos a uma força de compressão durante o aquecimento, baseado no conceito de LITS (Load Induced Thermal Strain) ou deformação térmica induzida pelo carregamento. A partir do modelo, é possível a quantificação preliminar da
Rev. IBRACON Estrut. Mater.. Publicado em: 2017-04