Thermal Expansion
Mostrando 1-12 de 150 artigos, teses e dissertações.
-
1. Properties and technical characteristics of Casira pottery, Jujuy, Argentina
Abstract In this work, the results of a multi-technique characterization of a type of pottery production with high cultural and economic relevance from the only potter town in Argentina are presented and correlated. Raw materials, a prepared paste, and ceramic samples were studied. Chemical, structural, textural, microstructural, and thermal features were as
Cerâmica. Publicado em: 2022
-
2. Microstructural characteristics, properties, synthesis and applications of mullite: a review
Abstract Mullite, an intermediate phase of the binary alumina-silica system, is one of the most important phases of ceramic products containing alumina and silica in the initial composition. Its stoichiometry ranges from 3Al2O3.2SiO2 (3:2) to 2Al2O3.SiO2 (2:1) and its crystalline structure is orthorhombic, characterized by the presence of octahedral chains o
Cerâmica. Publicado em: 2022
-
3. Effects of Intensification of Vaporization by Decompression to the Vacuum (IVDV) and frying on physicochemical, structural, thermal, and rheological properties of chickpea (Cicer arietinum L.) powder
Abstract Hard textural attributes of chickpea necessitate the employment of specialized pretreatment prior to roasting. As compared to frying, the Intensification of Vaporization by Decompression to the Vacuum (IVDV) as a vacuum expansion (VE) technique was utilized to improve and preserve the nutritional, textural, and structural properties of chickpeas. It
Food Sci. Technol. Publicado em: 2021-09
-
4. ERRATA
Abstract After natural fermentation and solar drying, sour cassava starch acquires expansion property. Traditionally, solar drying occurs without protection, and consequently physical contamination can arise. Thus, the aim of this study was to produce sour cassava starch using a low-cost solar dryer to prevent contamination, whilst retaining the expansion pr
Rev Bras Med Esporte. Publicado em: 2021-06
-
5. Traditional sour cassava starch obtained with alterations in the solar drying stage
Abstract After natural fermentation and solar drying, sour cassava starch acquires expansion property. Traditionally, solar drying occurs without protection, and consequently physical contamination can arise. Thus, the aim of this study was to produce sour cassava starch using a low-cost solar dryer to prevent contamination, whilst retaining the expansion pr
Food Sci. Technol. Publicado em: 2021-06
-
6. Thermal decomposition and reaction sintering for synthesis of mullite-zirconia composite using kaolin, γ-alumina and zirconia
Abstract The refractory materials used in the wall of the furnaces for glass melting can be prepared from mullite-zirconia composite material. The composite of mullite/zirconia was synthesized from Iraqi kaolin, γ-alumina, and zirconia using thermal decomposition with reaction sintering at 1600 °C. Several batches were prepared with various ratios of kaoli
Cerâmica. Publicado em: 2021-03
-
7. ANODES FOR SOFC: REVIEW OF MATERIAL SELECTION, INTERFACE AND ELECTROCHEMICAL PHENOMENA
This paper presents a comprehensive interface and electrochemical phenomena review of different anodes for SOFC. In this way, it was possible to select some mixed electronic and ionic conductor materials alternatives to the conventional anode, Ni-YSZ conductor. New materials must present a satisfactory electronic and ionic conductivity at intermediate temper
Quím. Nova. Publicado em: 2021-01
-
8. STUDY OF THERMAL EXPANSION AND COMPRESSION STRENGTH OF THREE WOOD SPECIES FROM PLANTATIONS
ABSTRACT The objective of this study was to evaluate the effect generated by a thermal treatment on the dimensional changes and compression behavior of three wood species from commercial plantations (Eucalyptus nitens, Tectona grandis and Gmelina arborea). To accomplish the goal, dilatometric and compression tests were performed in the three directions of wo
CERNE. Publicado em: 2020-06
-
9. Inflammatory segmental vitiligo during oral isotretinoin use: a casual association?,
ABSTRACT The objective of this study was to evaluate the effect generated by a thermal treatment on the dimensional changes and compression behavior of three wood species from commercial plantations (Eucalyptus nitens, Tectona grandis and Gmelina arborea). To accomplish the goal, dilatometric and compression tests were performed in the three directions of wo
An. Bras. Dermatol.. Publicado em: 2020-06
-
10. The variability of the subantarctic front and the Southern Hemisphere atmospheric jet
Abstract The latitudinal variations of the Subantarctic Front (SAF) and Southern Hemisphere atmospheric jet were investigated for the period of 1993-2016. Zonal wind velocity, sea surface height and temperature data were used to identify these features over the South Atlantic, South Pacific and Indian Oceans individually. During this period, the atmospheric
Braz. j. oceanogr.. Publicado em: 02/12/2019
-
11. Caracterização do composto de CuCr2O4 obtido pelo método da reação de combustão em solução
RESUMO O material CuCr2O4 foi sintetizado pela reação de combustão em solução e tratado termicamente na faixa de 600 à 1100oC, afim de verificar a evolução das fases. O composto foi carcterizado estrutural e morfologicamente por meio das técnicas de Difração de Raios X (DRX), refinamentos pelo método de Rietveld, Microscopia Eletrônica de Varred
Matéria (Rio J.). Publicado em: 16/09/2019
-
12. Characterization of Li2O-Al2O3-SiO2 glass-ceramics produced from a Brazilian spodumene concentrate
Resumo Vitrocerâmicas do sistema LAS (Li2O-Al2O3-SiO2) com elevada resistência ao choque térmico foram obtidas com sucesso com o uso de um concentrado de espodumênio brasileiro como principal matéria-prima (80%-70% em massa). Duas composições (Li2O.Al2O3.nSiO2) foram produzidas com n= 2 e 4, próximas às composições estequiométricas das fases eucr
Cerâmica. Publicado em: 15/08/2019