Thermal Characterization
Mostrando 13-24 de 743 artigos, teses e dissertações.
-
13. Polyurethane/poly (Ionic Liquids) Cellulosic Composites and their Evaluation for Separation of CO2 from Natural Gas
The development of both versatile and inexpensive sorbents for CO2/CH4 separation has become one of the greatest challenges to the environment and natural gas processing. This study reports the preparation and characterization of polyurethane (PU)/ cellulose based poly(ionic liquid)(CPIL) composites for CO2/CH4 separation. PU matrix was reinforced with CPIL
Mat. Res.. Publicado em: 20/01/2020
-
14. Characterization of Nanocellulose Obtained from Cereus Forbesii (a South American cactus)
Crystalline cellulose nanofibers are obtained from the bark of Cereus Forbesii, a cactus native to the arid areas of South America. The obtaining of cellulose nanofibers was carried out in several steps: pretreatment of the raw material, elimination of hemicellulose and lignin to obtain cellulose, and an acid hydrolysis of cellulose to obtain crystalline cel
Mat. Res.. Publicado em: 20/01/2020
-
15. Microstructure and Thermal Analyses of Cu87-xAl13Nbx High-Temperature Shape Memory Alloys
This paper presents a thermal and microstructural characterization of Cu87-xAl13Nbx (wt%) high temperature shape memory alloys (HTSMA), with Nb contents ranging from 1 to 3%. The alloys were obtained by arc melting under argon atmosphere. Thermal characterization was performed by differential scanning calorimetry (DSC), revealing that the phase martensitic t
Mat. Res.. Publicado em: 28/11/2019
-
16. Microbial Synthesis and Characterization of Biodegradable Polyester Copolymers from Burkholderia Cepacia and Cupriavidus Necator Strains Using Crude Glycerol as Substrate
Abstract Polymers are materials of pronounced importance in the modern world, since they are massively present in everyday life, especially in the form of packaging. However, most of these materials are derived from non-renewable sources and their disposal generates large volumes of waste, which is extremely damaging to natural environments. In this context,
Braz. arch. biol. technol.. Publicado em: 24/10/2019
-
17. THERMAL BEHAVIOR OF FOREST BIOMASS WASTES PRODUCED DURING COMBUSTION IN A BOILER SYSTEM
RESUMO Durante a queima da biomassa em sistemas industriais haverá a formação de resíduos contendo cinzas e carbono residual, cujo teor será variável em função da eficiência e dos parâmetros de operação das câmaras de combustão. A caracterização destes resíduos é ferramenta essencial para visualizar a sua potencialidade de reuso energético
Rev. Árvore. Publicado em: 23/09/2019
-
18. Síntesis y caracterización de un novedoso biomaterial a base de quitosano modificado con aminoácidos
ABSTRACT The chemical modification of chitosan (CH) from shrimp shells (Litopenaeus vannamei) was performed with amino acids: L-leucine (Leu) and L-tyrosine (Tyr), in order to change some of its physical and chemical properties, which allow the enhancement of the applications of chitosan in biomedical and pharmacological areas. The characterization of chitos
Matéria (Rio J.). Publicado em: 16/09/2019
-
19. Síntese e caracterização de cobaltita de níquel (NiCo2O4) obtida pelométodo dos precursorespoliméricos
RESUMO A cobaltita de níquel (NiCo2O4) de estrutura do tipo espinélio apresenta baixa estabilidade térmica em torno dos 400 °C, que ocasiona a perda de NiO, afetando de maneira significativa as propriedades físicas e estruturais do material produzido. Neste trabalho a cobaltita de níquel foi preparada pelo método dos precursores poliméricos. O materi
Matéria (Rio J.). Publicado em: 16/09/2019
-
20. Efeitos da variação da concentração de solução polimérica aquosa a base de PVP na têmpera de aço AISI 4140
RESUMO A têmpera é um tratamento térmico que tem como principal objetivo a elevação de dureza e resistência mecânica dos aços por meio da sua transformação microestrutural. O processo se baseia na elevação da temperatura do material até a austenitização, seguida do arrefecimento por meio da imersão em um fluido, a qual precisa ser rápida o s
Matéria (Rio J.). Publicado em: 16/09/2019
-
21. Influência do envelhecimento termo-oxidativo nas propriedades mecânicas e de amarelamento de blendas de poliestireno com borracha reciclada de estireno-butadieno (SBR)
RESUMO Este trabalho teve como objetivo avaliar o envelhecimento termo-oxidativo, nas propriedades mecânicas e de índice de amarelamento (YI), de blendas de poliestireno com borracha reciclada (SBRr), compatibilizadas. As blendas foram preparadas, inicialmente, em uma extrusora de rosca dupla corrotacional e, posteriormente, os grânulos extrudados foram m
Matéria (Rio J.). Publicado em: 16/09/2019
-
22. Development and validation of a data logger for thermal characterization in laying hen facilities
RESUMO O monitoramento ambiental em instalações animais, que inclui o armazenamento de dados coletados de forma robusta, prática e viável, é um desafio constante. O objetivo deste estudo foi desenvolver um data logger confiável para monitorar a temperatura e umidade relativa do ar dos aviários e avaliar a adequação do projeto usando instrumentos pad
Rev. bras. eng. agríc. ambient.. Publicado em: 09/09/2019
-
23. Effects of Macrosegregation and Microstructure on the Corrosion Resistance and Hardness of a Directionally Solidified Zn-5.0wt.%Mg Alloy
This study aims to analyze the influence of macrosegregation on microstructure evolution, and of microstructure length scale on the corrosion resistance of a Zn-5.0wt.%Mg alloy casting. The analyzed samples were taken along the length of castings unidirectionally solidified in unsteady state conditions of heat extraction. Microstructure characterization, mic
Mat. Res.. Publicado em: 05/09/2019
-
24. Mineralogical and gemological characterization of emerald crystals from Paraná deposit, NE Brazil: a study of mineral chemistry, absorption and reflectance spectroscopy and thermal analysis
Abstract The Paraná deposit, located at Southwestern Rio Grande do Norte state, in Brazil, is one of the few emerald deposits found at Borborema Province. The mineralization occurs in phlogopite schists and actinolite-phlogopite schists associated with pegmatites and albitites within the Portalegre Shear Zone. Unlike other well-known Brazilian emerald depos
Braz. J. Geol.. Publicado em: 22/08/2019