Tensile Armor
Mostrando 1-11 de 11 artigos, teses e dissertações.
-
1. Guaruman: a Natural Amazonian Fiber with Potential for Polymer Composite Reinforcement
The Amazonian region of South America is known for its diversified number of plants from which food, medicine, wood and fibers have, since long time, been produced by local natives. A typical example is the guarumã (“guaruman”as suggested English spelling) scientifically identified as Ischinosiphon koem, an abundant plant found in the low lands alongsid
Mat. Res.. Publicado em: 12/08/2019
-
2. Tensile Armor Wires Submitted to Slow Strain Rate Tests in a Corrosive Environment and Cathodic Protection: a Comparison Between Two Different Microstructures
Tensile armor in flexible pipes consists of two or more layers of steel wires. Damage to the outer sheath may cause ingress of seawater in the annular space and thus corrosion of the armor wires. This work focused on the susceptibility of these wires to stress corrosion cracking (SCC) and hydrogen embrittlement (HE) using a slow strain rate test (SSRT) under
Mat. Res.. Publicado em: 06/05/2019
-
3. Natural ageing of polyaramide fiber from ballistic armor
Abstract Ballistic armor has been manufactured primarily based on polyaramide (Kevlar and Twaron) or Dyneema but the lifespan warranty in Brazil is only 5 years and after this time period they are incinerated or comminuted and ground up. This study aims to evaluate the changes on the physical, mechanical and morphological properties of polyaramide fibers of
Polímeros. Publicado em: 18/03/2019
-
4. Influencia de la temperatura en ensayos de arrancamiento sobre diferentes sistemas epoxi-acero de uso en conectores de ductos flexibles
ABSTRACT In the offshore oil fields located in deep and ultra-deep waters they are used flexible pipes. In many cases inside these pipes, the hydrocarbons are transported at elevated temperatures. At the ends of the flexible pipes are installed end fittings, these are the connection with sea platforms and different subsea systems. In the assembly of end fitt
Matéria (Rio J.). Publicado em: 19/07/2018
-
5. Caracterización de resinas epoxi para uso en conectores de ductos flexibles
ABSTRACT In the offshore productions of gas and oil are frequently used flexible pipes. The end fitting is the connection between the flexible pipe body and the production unit, at the assembly of this component is used epoxy resin to fill the free space inside it. This polymeric material holds the tensile armor wires to form the anchoring system. A critical
Matéria (Rio J.). Publicado em: 19/07/2018
-
6. Study of Aramid Fiber/Polychloroprene Recycling Process by Thermal Degradation
ABSTRACT Aramid fiber is an important polymer applied as reinforcement in high-performance composites, which, due its exceptional properties, becomes an excellent impact absorption material. It has been broadly utilized in aeronautic industry and ballistic protection. In aircrafts, it is mainly used in secondary structures, such as fairings, floor panels, an
J. Aerosp. Technol. Manag.. Publicado em: 2016-09
-
7. FLEXIBLE RISERS MONITORING TECHNIQUE BASED ON VIBRATION MEASUREMENTS / MONITORAMENTO DE RISERS FLEXÍVEIS ATRAVÉS DE TÉCNICA BASEADA EM VIBRAÇÕES
The main failure in flexible risers is the disruption of the wires from the tensile armor layer. Experience has shown that this class of damage occurs primarily near to the top riser connector. The breaking of the wires occurs gradually and may be caused by different processes as corrosion by inflow of fluid in the annular space, excessive wear associated wi
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 12/04/2012
-
8. Estudo do efeito da delaminação nas propriedades mecânicas de um vidro com resistência balística
O vidro com resistência balística é composto por camadas de vidro, policarbonato ou similares, poliuretano e poli(vinil butiral) e uma resina que por meio de um processo de autoclavagem une os materiais obtendo as propriedades desejadas. As espessuras bem como, a quantidade de lâminas variam de acordo com o nível de resistência balística que se deseja
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 05/05/2011
-
9. MONITORING FLEXIBLE RISERS WITH OPTICAL FIBER SENSORS / MONITORAMENTO DE RISERS FLEXÍVEIS COM SENSORES A FIBRA ÓPTICA
The interest in structural health monitoring of flexible risers has grown significantly in recent years. For ducts that are already reaching their design life, monitoring systems can provide early warnings of potential failures and also assist the operator in scheduling downtime. Different techniques are being tested by operators of flexible pipes such as au
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 07/04/2011
-
10. Avaliação das armaduras de tração de riser flexível durante ensaios axiais de tração e fadiga
O presente trabalho tem como objetivo avaliar as tensões atuantes no conjunto conector e duto flexível de camadas não aderentes durante ensaios com carregamentos axiais de tração e fadiga. Estes ensaios são utilizados para a qualificação de dutos flexíveis. Foram desenvolvidos e patenteados alguns modelos de conectores contemplando apenas a parte es
Publicado em: 2010
-
11. Avaliação da vida em fadiga de um novo modelo de terminal conector para dutos flexíveis
Este trabalho foca a avaliação da vida em fadiga de um novo modelo de terminal conector para dutos flexíveis (risers) de camadas não aderentes (unbonded). Os ensaios foram feitos levando em consideração apenas a parte estrutural desses dutos, de forma a ensaiar uma nova configuração de ancoragem da armadura de tração encontrada nesse equipamento co
Publicado em: 2009