Temperatures
Mostrando 1-12 de 7406 artigos, teses e dissertações.
-
1. Catalysts Derived from Thermal Treatments of Hydrocalumite-Type Compounds: Synthesis and Application in Transesterification Reactions
Catalyst performance is a relevant factor in biodiesel production because it can affect the efficiency of the process. This work provides a study of the performance of heterogeneous catalysts for biodiesel production derived from thermal-treated hydrocalumite-type compounds. This work aimed to synthesize and characterize hydrocalumite-type compounds intercal
Journal of the Brazilian Chemical Society. Publicado em: 2023
-
2. Temperatures and light regimes in the germination of Areca vestiaria and Areca triandra seeds
ABSTRACT Propagation of palm trees is mainly by seeds and, in general, germination is uneven and slow, caused by several factors, such as temperature and light. We aimed to evaluate the effect of different temperature conditions and light regimes in the germination of Areca vestiaria and Areca triandra seeds. Two experiments were carried. The experimental de
Revista Ceres. Publicado em: 2022
-
3. Mullite macro-needles for reinforcement of refractory castables
Abstract Ceramic macro-needles incorporation as reinforcement in commercial refractory castable was studied. Ceramic macro-needles (Ø2x20 mm) were made from kaolinite clay and gibbsite to obtain mullite as the main crystalline phase. Specimens with the ceramic reinforcement were evaluated by compression after being treated at two temperatures (815 and 1400
Cerâmica. Publicado em: 2022
-
4. EFFECT OF REACTION CONDITIONS ON PARTICLE SIZE OF ZNO NANOPARTICLES VIA CONTROLLED PRECIPITATION METHOD AND IN-VITRO ANTIBACTERIAL CAPACITY
High-yield ZnO spheroidal nanoparticles with an average diameter around 23 nm (≈ 25% frequency) and 30 nm (≈ 28% frequency) were obtained by controlled semicontinuous precipitation at low temperatures. This synthesis was obtained from hydrozincite (Zn5(CO3)2(OH)6) as primary nanoparticles. The Zn5(CO3)2(OH)6 nanoparticles were synthesized by hydrolysis o
Química Nova. Publicado em: 2022
-
5. Post-Occupancy Evaluation of an educational building: Case study of the ETS-UESC Building
Abstract The physical and environmental conditions of educational institutions are determining factors for occupant comfort. The Post-Occupancy Evaluation (POE) presents itself as a methodology for verifying environmental aspects in full use, considering the technical criteria and the users' perception. This article discusses the particularities of the ETS-U
REM - International Engineering Journal. Publicado em: 2022
-
6. Comparison of minimal-flow sevoflurane versus desflurane anesthesia: randomized clinical trial
Abstract Background and objectives: Minimal-flow anesthesia provides various advantages, such as reduced environmental pollution, proper humidification and warming of anesthetic gases, and reduced costs. The aim of this study was to compare the cost-effectiveness of minimal-flow sevoflurane and desflurane anesthesia and their effects on hemodynamics, postop
Brazilian Journal of Anesthesiology. Publicado em: 2022
-
7. Numerical simulations of ceramic firing in catenary kilns
Abstract Kiln geometries were developed to reach homogeneous temperatures above 900 °C, during the firing process, aiming to improve the production process of the ceramists from Vale do Jequitinhonha (MG/Brazil). Techniques of reactive flow numerical solution using the software Ansys CFX have been used to foresee the behavior of the firings. Two types of ca
Cerâmica. Publicado em: 2022
-
8. Morphocultural and pathogenic characterization of Colletotrichum gossypii and Colletotrichum gossypii var. cephalosporioides under different temperatures
RESUMO Considerando a importância da identificação de espécies de Colletotrichum associadas à cultura do algodoeiro, objetivou-se realizar a caracterização morfológica e patogênica de isolados de Colletotrichum gossypii var. cephalosporioides e de Colletotrichum gossypii submetidos a diferentes temperaturas. Foram utilizados cinco isolados de C. gos
Revista Brasileira de Engenharia Agrícola e Ambiental. Publicado em: 2022
-
9. ADSORPTION OF ATRAZINE IN RICE HUSK BIOCHARS: A PHENOMENOLOGICAL MODEL APPLIED TO EQUILIBRIUM AND KINETIC STUDIES
ABSTRACT Atrazine is an herbicide used to remove weeds in agricultural crops; however, because it is considered toxic, options for removing it from the environment are needed. Adsorption on biochar is an efficient technique for removing organic contaminants. In this study, the atrazine adsorption capacities of two biochars (BCA400 and BCA700) produced from r
Engenharia Agrícola. Publicado em: 2022
-
10. ENERGY EFFICIENCY OF AGRICULTURAL TRACTORS EQUIPPED WITH CONTINUOUSLY VARIABLE AND FULL POWERSHIFT TRANSMISSION SYSTEMS
ABSTRACT The efficiency of agricultural tractor transmission has been improved over the years, with new concepts such as Continuously Variable Transmission (CVT) and Full Powershift (FPS) evolving in advanced technologies. Both options seek to offer the farmer greater operational results with lower energy expenditure, necessitating studies to assess the effe
Engenharia Agrícola. Publicado em: 2022
-
11. Finite element computational development for thermo-mechanical analysis of plane steel structures exposed to fire
Abstract This article presents a numerical formulation based on finite element procedures for application in nonlinear thermo-mechanical analyses of steel planar structures under fire condition. The mechanical properties of structural elements degrade when subjected to high temperatures, resulting in significant reductions in strength and stiffness. Under th
REM - International Engineering Journal. Publicado em: 2022
-
12. Selective formation of neodymium phosphate from iron-neodymium magnet waste
Abstract Neodymium-iron-boron alloy, Nd2Fe14B, is used as a material for magnets. Neodymium is one of the valuable and expensive rare earth elements and is often recovered to reduce costs and environmental impact. Recently, a method for recovering neodymium as neodymium phosphate from mixed solutions was reported. This method was very useful because the main
Cerâmica. Publicado em: 2022