Synthesis Of Zno
Mostrando 1-12 de 28 artigos, teses e dissertações.
-
1. Synthesis of TiO2/ZnO photoanodes on FTO conductive glass for photovoltaic applications
Abstract For oxide semiconductors for application in dye-sensitized solar cells (DSSCs), titanium dioxide conjugated with zinc oxide thin films was synthesized and characterized. The UV (ultraviolet) spectrum characterization showed a peak of absorbance at around 355 nm, with a band gap of 3.25 eV and reflectance around 85%. Such characteristics allowed the
Cerâmica. Publicado em: 2023
-
2. EFFECT OF REACTION CONDITIONS ON PARTICLE SIZE OF ZNO NANOPARTICLES VIA CONTROLLED PRECIPITATION METHOD AND IN-VITRO ANTIBACTERIAL CAPACITY
High-yield ZnO spheroidal nanoparticles with an average diameter around 23 nm (≈ 25% frequency) and 30 nm (≈ 28% frequency) were obtained by controlled semicontinuous precipitation at low temperatures. This synthesis was obtained from hydrozincite (Zn5(CO3)2(OH)6) as primary nanoparticles. The Zn5(CO3)2(OH)6 nanoparticles were synthesized by hydrolysis o
Química Nova. Publicado em: 2022
-
3. Design, Synthesis, and Application of Colored Cobalt Pigments (Pink, Blue, Green)
The combination of white or colorless oxides (MgO, Al2O3, ZnO) with colorant ions (Co2+) generates colored pigments (pink, blue, green). The color is caused by the insertion of the colorant ion in the respective crystal lattices (periclase, alumina, wurtzite), as verified by X-ray diffraction. Absorption spectra in the visible region show analogous triplet b
J. Braz. Chem. Soc.. Publicado em: 2020-11
-
4. Synthesis of ZnO Nanoparticles by the Sol-Gel Protein Route: A Viable and Efficient Method for Photocatalytic Degradation of Methylene Blue and Ibuprofen
The photocatalytic degradation of methylene blue dye and ibuprofen drug was studied in the presence of zinc oxide, synthetized by the protein sol-gel route. The catalyst, calcined at 1000 ºC, presented a tendentious morphology to filaments characteristic of ZnO crystalline, characterized by X-ray diffraction (XRD) and confirmed by the presence of Zn energy
J. Braz. Chem. Soc.. Publicado em: 2020-08
-
5. Green synthesis and Characterization of ZnO-CoFe2O4 Semiconductor Photocatalysts Prepared Using Rambutan (Nephelium lappaceum L.) Peel Extract
In this work, the semiconductor of ZnO-CoFe2O4 composites were prepared by green synthesis approach using rambutan peel extract (Nephelium lappaceum L.) as a capping agent. X-ray diffraction patterns of composites showed the main peaks of ZnO at 2θ = 31.8°, 34.5°, and 36.2° corresponding to hexagonal wurtzite structure and weak peak at 2θ = 35.4° for c
Mat. Res.. Publicado em: 30/09/2019
-
6. Application of Zinc Oxide in Hybrid Solar Cells Using a P3HT and P3OT Polymer Junction as Charge Carrier
Hybrid solar cells show an increasing number in researches due to its low cost and easy of production. They are composed by and organic material and a semiconductor oxide. The aim of this paper was to synthesis and characterize zinc oxide by coprecipitation and apply it in a hybrid solar cell that uses a P3HT/P3OT copolymer as charge carrier. The cell was as
Mat. Res.. Publicado em: 01/07/2019
-
7. Avaliação do tratamento térmico no catalisador magnético Ni0,5Zn0,5Fe2O4 e sua atividade catalítica na produção de biodiesel por transesterificação e esterificação simultânea do óleo de fritura
Resumo O objetivo deste trabalho foi avaliar o efeito do tratamento térmico na síntese do catalisador Ni0,5Zn0,5Fe2O4 e o desempenho catalítico em reações de transesterificação e esterificação simultânea (TES) do óleo de fritura. Os catalisadores foram sintetizados por reação de combustão sem e com tratamento térmico sequencial a 800 °C com t
Cerâmica. Publicado em: 2019-01
-
8. Evaluation of the Photocatalytic Potential of TiO2 and ZnO Obtained by Different Wet Chemical Methods
This paper describes the development of TiO2 and ZnO particles by a chemical route, using two different wet synthesis methods: polymeric precursor (PP) and sol-gel (SG). This study aimed to shed a light on how the synthesis method affects the photocatalytic activity of these oxides. Rhodamine B (RhB) degradation was used as a probe reaction to test the as-sy
Mat. Res.. Publicado em: 26/06/2017
-
9. ZNO and AG-ZNO crystals: synthesis, characterization, and application in heterogeneous photocatalysis
ZnO and Ag-ZnO were synthesized in a simple and efficient manner by thermal decomposition of zinc oxalate and silver/zinc mixed oxalate. The influence of the addition of metallic silver on ZnO particles and the effect of temperature in the thermal treatment were investigated. The samples were characterized by thermogravimetric analysis, Raman, X-ray diffract
Quím. Nova. Publicado em: 2016-05
-
10. OBTAINING ZnO IMMOBILIZED OVER DIFFERENT SUBSTRATES BY HYDROTHERMAL TREATMENT FOR PHOTOCATALYSIS APPLICATION
The aim of this work is to systematically explore the effect of the synthesis conditions of ZnO structures, immobilized on different substrates by hydrothermal treatment, in its photocatalytic activity. A circumscribed central composite design of experiments was used to analyze the effects of reagents stoichiometry, reaction time and temperature, covering a
Quím. Nova. Publicado em: 2016-04
-
11. Ni(II), Cu(II), AND Zn(II) COMPLEXES DERIVED FROM A NEW SCHIFF BASE 2-((Z)-(3-METHYLPYRIDIN-2- YLEIMINO)METHYL)PHENOL AND SYNTHESIS OF NANO SIZED METAL OXIDE PARTICLES FROM THESE COMPOUNDS
Synthesis, spectral identification, and magnetic properties of three complexes of Ni(II), Cu(II), and Zn(II) are described. All three compounds have the general formula [M(L)2(H2O)2], where L = deprotonated phenol in the Schiff base 2-((z)-(3-methylpyridin-2-yleimino)methyl)phenol. The three complexes were synthesized in a one-step synthesis and characterize
Quím. Nova. Publicado em: 2015-11
-
12. Study of oxide nanoparticles as additives for vegetable lubricants
Currently, vegetable oils have been studied as biolubricants in order to reach new environmental standards. Besides being non-renewable, mineral oils from petroleum bring consequences to the environment due to its low biodegradability. Thus, the aim of this work is to develop a biolubricant and to add oxide nanoparticles (ZnO and CuO) in order to improve abr
Mat. Res.. Publicado em: 2014-10