Suspensions
Mostrando 1-12 de 2255 artigos, teses e dissertações.
-
1. Design, development, and implementation of 3D-printed polylactic acid centrifuge rotors for laboratory-scale applications
In this work, self-made laboratory centrifuge equipment was developed for the separation of suspensions and immiscible liquids. This centrifuge was based on the Arduino microcontroller and fabricated from simple and recycled mechanical and electronic parts, spending an inexpensive budget suitably. The centrifuge frame and rotors were manufactured of Polylact
Química Nova. Publicado em: 2022
-
2. PARAMETERS FOR MODELING PASSIVE SUSPENSIONS OF SPRAY BARS
ABSTRACT The uniformity and quality of spraying depend on the stability of the spray boom, defined as the suspension system between the boom and the machine chassis. This paper presents a procedure for improving the performance of passive spray bar suspensions through parameter adjustment. Two multibody dynamics models of a tractor sprayer set were developed
Eng. Agríc.. Publicado em: 2021-05
-
3. Effects of addition of engineered ZnO nanoparticles on the stability of colloidal suspensions containing TiO2 interacting with sandy soil
Abstract The stability of colloidal suspensions of engineered nanoparticles in the environment is of great interest for the risk assessment and treatment of hazardous materials. The relevance of this study is due to the evidence that engineered nanoparticles have been produced and used in commercial products in large scale, especially ZnO and TiO2, which are
REM, Int. Eng. J.. Publicado em: 2020-06
-
4. Molecular characterization of Bacillus thuringiensis strains to control Spodoptera eridania (Cramer) (Lepidoptera: Noctuidae) population
Abstract The main objective of this study was to characterize the toxicity and genetic divergence of 18 Bacillus thuringiensis strains in the biological control of Spodoptera eridania. Bacterial suspensions were added to the S. eridania diet. Half of the selected B. thuringiensis strains caused high mortality seven days after infection. The genetic divergenc
Rev. Bras. entomol.. Publicado em: 17/01/2020
-
5. EVALUATION OF SILICA NANOPARTICLE COLLOIDAL STABILITY WITH A FIBER OPTIC QUASI-ELASTIC LIGHT SCATTERING SENSOR
Abstract Colloidal silica is an important biocompatible, inert and non-toxic material for imaging, therapy, and drug delivery biomedical applications. In this context, the evaluation of colloidal suspensions and their stabilities by a Fiber Optic Quasi-Elastic Light Scattering sensor is proposed. Two different silica nanoparticles were prepared and character
Braz. J. Chem. Eng.. Publicado em: 13/01/2020
-
6. In situ DEPOSITION OF COPPER NANOPARTICLES ON POLYETHYLENE TEREPHTHALATE FILTERS AND ANTIBACTERIAL TESTING AGAINST Escherichia coli AND Salmonella enterica
Abstract This study reports a synthesis of copper nanoparticles (CuNP) deposited on polyethylene terephthalate (PET) filters and antibacterial evaluation of the obtained filters against Escherichia coli and Salmonella enterica. CuNP were synthesized by a two-step method involving adsorption of [Cu(OH)4]2- ions onto a PET filter and subsequent chemical reduct
Braz. J. Chem. Eng.. Publicado em: 13/01/2020
-
7. Effect of nano-silica on Portland cement matrix
Resumo O uso de nanopartículas é uma tendência recente que pode assumir um papel importante para melhorar o desempenho mecânico do cimento Portland. O objetivo deste estudo é avaliar o efeito da nanossílica na matriz de cimento Portland. A distribuição do tamanho das partículas da matriz de cimento Portland foi modificada pela incorporação de 11,
Rev. IBRACON Estrut. Mater.. Publicado em: 13/12/2019
-
8. Pathogenicity of Metarhizium anisopliae and Beauveria bassiana fungi to Tetranychus ludeni (Acari: Tetranychidae)
RESUMO O uso de acaricidas é o principal método de controle de Tetranychus ludeni (Acari: Tetranychidae) em cultivos hortícolas. Esse ácaro foi registrado causando danos em batata-doce (Ipomoea batatas (L.). A utilização de fungos patogênicos é uma alternativa ao controle químico. O objetivo foi avaliar a patogenicidade dos fungos Metarhizium anisop
Arq. Inst. Biol.. Publicado em: 02/12/2019
-
9. Avaliação do efeito de cepas probióticas em biofilme de S. aureus sobre discos de titânio com superfície tratada
Resumo Introdução As doenças peri-implantares apresentam como um dos principais fatores etiológicos o biofilme bacteriano, geralmente formado por uma microbiota semelhante à das doenças periodontais. Seu tratamento está centrado na descontaminação da superfície do implante e na remoção mecânica do biofilme, podendo ainda estar associado à admi
Rev. odontol. UNESP. Publicado em: 02/12/2019
-
10. Reparative Dentin Formation Using Stem Cell Therapy versus Calcium Hydroxide in Direct Pulp Capping: An Animal Study
Resumo O processo de capeamento pulpar direto é um método terapêutico que visa a manutenção da vitalidade e saúde da polpa, usando um material biocompatível colocado diretamente sobre a polpa exposta. O objetivo deste estudo foi avaliar e comparar o efeito do capeamento pulpar direto usando células-tronco da polpa dentária (CTPDs) ou hidróxido de c
Braz. Dent. J.. Publicado em: 28/11/2019
-
11. In vitro ovicidal and larvicidal activity of Carica papaya seed hexane extract against Strongyloides venezuelensis
ABSTRACT Strongyloidiasis is a human parasitic disease caused by the helminth Strongyloides stercoralis whose treatment is particularly difficult in immunosuppressed patients due to their low responsiveness to conventional therapy. Carica papaya and its isolated compounds benzyl isothiocyanate, carpaine and carpasemine are promising compound for the treatmen
Rev. Inst. Med. trop. S. Paulo. Publicado em: 25/11/2019
-
12. β-Tricalcium phosphate shaped by replica method
Resumo Biomateriais, como o fosfato tricálcico, podem apresentar diferentes taxas de reabsorção no organismo que dependem das suas propriedades físico-químicas sendo que a condição superficial, tais como morfologia, tamanho de partículas e porosidade, é de fundamental importância. Assim, neste trabalho, estudou-se o recobrimento da matriz Luffa cyl
Cerâmica. Publicado em: 14/11/2019