Surface Properties
Mostrando 1-12 de 3221 artigos, teses e dissertações.
-
1. Evaluation of the Properties of LaNiO3 Material Prepared by the Modified Proteic Method for Adsorption of Environmental Contaminants
LaNiO3 material was synthesized by modified proteic method, calcined at 900 °C/2 h in air atmosphere and was applied to remove environmental contaminants. LaNiO3 phase with a perovskite structure was formed in the calcined material, which has a surface area of 22 m2 g-1 and is formed by fine particles agglomerated, with pH of the zero charge point of 7.44.
Journal of the Brazilian Chemical Society. Publicado em: 2023
-
2. Alumina applied in bone regeneration: Porous α-alumina and transition alumina
Abstract Alumina is a polymorphic bioceramic that has been extensively investigated for application in bone regeneration. Dense α-alumina has been considered a suitable biomaterial for dental and orthopedic implants due to its superior mechanical properties. However, its use is limited due to its high inertia in a biological environment. Recent investigatio
Cerâmica. Publicado em: 2022
-
3. Preparation and performance of magnetic zirconium-iron oxide nanoparticles loaded on palygorskite in the adsorption of phosphate from water
Magnetic zirconium-iron oxide nanoparticles loaded on palygorskite as a low-cost adsorbent was produced by one-step co precipitation technique and its properties for phosphate adsorption were overall investigated. The Brunauer Emmett Teller (BET) specific surface area analysis, scanning electron microscopy (SEM), thermo gravimetric analysis (TGA), Fourier tr
Química Nova. Publicado em: 2022
-
4. Iron Cobaltite (FeCo2O4) Nanocatalysts for Water-Oxidation: Effects of Annealing Temperature on Catalytic Properties
The development of efficient, stable, and non-precious metal water oxidation catalysts (WOCs) is a matter of importance for sustainable energy research. In this work, iron cobaltite (FeCo2O4) nanoparticles were prepared by the coprecipitation method, and we present the effect of heat treatment (250, 350, 450, 650 and 900 °C) on the catalytic properties. Cat
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
5. Tuning the Photocatalytic Activity of Tin Oxide through Mechanical Surface Activation
Tin oxide (SnO2) nanoparticles were synthesized by the co-precipitation method and mechanically modified by high-energy ball milling. The experimental results demonstrate that the collision with zirconia balls produces slight changes in the crystalline, electronic, morphological, and surface properties of SnO2, which lead to an increase in the redox potentia
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
6. Enhancement of Visible Light-Responsive Photocatalytic Efficiency by Using a Laccaic Acid-Modified Titanium Dioxide Photocatalyst
In this study, a laccaic acid-modified TiO2 photocatalyst (Lac-TiO2) was prepared via an impregnation method with 0.50, 1.00, 2.50, and 5.00 wt.% laccaic acid. The products’ physical properties were examined through X-ray powder diffraction (XRD), field emission scanning electron microscopy (FE-SEM), X-ray photoemission spectroscopy (XPS), UV-Vis diffused
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
7. Synthesis and Molecular Modeling Study of Two Bromo-Dimethoxybenzaldehydes
This work describes the synthesis, molecular structure, and packaging of the compounds 6-bromo-2,3-dimethoxybenzaldehyde (6-BRB) and 5-bromo-2,3-dimethoxybenzaldehyde (5 BRB). Characterization in the solid-state was carried out by X-ray diffraction, and the analysis of the interactions was described by the Hirshfeld surface, which helps in understanding the
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
8. Characterization and potential applications of new boron-phosphate glass in the CaO-P2O5-K2O-B2O3 system
Abstract Boron phosphate glasses are known for their unique properties and have been investigated as biodegradable materials for biomedical applications. In this context, the present research studied the characterization of physical, mechanical, and bioactive properties of new boron-phosphate glass in the CaO-P2O5-K2O-B2O3 system produced by the melt-quenchi
Cerâmica. Publicado em: 2022
-
9. Management of rice straw in rice-soybean succession in tropical lowland
ABSTRACT This study aimed to analyze rice straw alternative managements to maximize the rice-soybean succession yield and to quantify their impacts on soil properties. The experiment was set up in a completely randomized design with six replicates. Nine rice straw managements were evaluated: straw burning (M1), straw harvesting (M2), straw incorporation with
Revista Ceres. Publicado em: 2022
-
10. Ultrafine quartz flocculation: Part I. System characterization and variables selection
Abstract A characterization study was performed to verify the more relevant physicochemical properties for quartz flocculation with polyacrylamide, as well as to define which variables should be further investigated regarding this flocculation system. Polyacrylamide was evaluated through molecular weight, radius of gyration, and infrared spectrometry. A natu
REM - International Engineering Journal. Publicado em: 2022
-
11. Boosting the Photocurrent of the WO3/BiVO4 Heterojunction by Photoelectrodeposition of the Oxy-Hydroxide-Phosphates Based on Co, Fe, or Ni
Here we investigated the photoelectrodeposition of oxygen-evolving catalysts (OECs) based on oxy-hydroxides-phosphates of Co, Fe, or Ni (CoPi, FePi, and NiPi) on the WO3/BiVO4 heterojunction and their activity in water oxidation. The OECs were deposited by cycles of (i) open-circuit potential (OCP) and (ii) applying a potential positive enough to oxidize the
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
12. The influence of separately and combined bentonite and kaolinite as binders for pelletization of NaA zeolite from coal fly ash
Abstract Pelletization of zeolitic materials is required to facilitate their practical industrial and commercial applications. Zeolite-NaA was synthesized from fly ash by the fusion method and shaped into spherical granules. Bentonite, kaolinite, and a combination of bentonite with kaolinite were tested as binders with different contents from 5 to 10 wt%. Th
Cerâmica. Publicado em: 2022