Styrene Butadiene Rubber
Mostrando 1-12 de 22 artigos, teses e dissertações.
-
1. Influência do envelhecimento termo-oxidativo nas propriedades mecânicas e de amarelamento de blendas de poliestireno com borracha reciclada de estireno-butadieno (SBR)
RESUMO Este trabalho teve como objetivo avaliar o envelhecimento termo-oxidativo, nas propriedades mecânicas e de índice de amarelamento (YI), de blendas de poliestireno com borracha reciclada (SBRr), compatibilizadas. As blendas foram preparadas, inicialmente, em uma extrusora de rosca dupla corrotacional e, posteriormente, os grânulos extrudados foram m
Matéria (Rio J.). Publicado em: 16/09/2019
-
2. Composition Determination of Rubber Blends by Applying Differential Scanning Calorimetry and SPA-PLS Treatment
This paper proposes an innovative approach to determine the composition of natural rubber (NR) and styrene butadiene rubber (SBR) blends from the analysis of the data provided by the differential scanning calorimetry (DSC) technique. DSC registers are post-processed, based on a multivariate chemometric approach, consisting in the application of the successiv
Mat. Res.. Publicado em: 07/01/2019
-
3. Quantification by FT-IR (UATR/NIRA) of NBR/SBR blends
Abstract Rubber blends are important materials in automotive industry, as well as in other sectors. However, there are implications when suitable use of a polymer in an artifact is not made. In the automotive area, for example, the use of an elastomer without the fuel resistance requirement would result in component degradation, potential fuel leakage, and
Polímeros. Publicado em: 29/11/2018
-
4. Estrategia para la optimización de un compuesto de caucho con aceite de soja utilizando diseños de experimentos
ABSTRACT When a rubber component is made, is necessary to start from a “rubber compound” which may be composed of one or more polymers and various additives or fillers. The development of an elastomer mixture to produce a compound with a specific end-use is complicated in the field of rubber technology. Therefore, the successful development of a compound
Matéria (Rio J.). Publicado em: 19/07/2018
-
5. Toughening of polystyrene using styrene-butadiene rubber (SBRr) waste from the shoe industry
Abstract The vulcanized rubber waste from the shoe industry causes environmental damage when it is incinerated or inappropriately discarded, turning this into a problem of major concern. Therefore, this study had as the main objective the Polystyrene (PS) toughening using different contents of white vulcanized styrene-butadiene rubber (SBRr) waste produced i
REM, Int. Eng. J.. Publicado em: 2018-04
-
6. Evaluation of silanes in SBR 1502 / Telinne Monspessulana flour composites
Abstract A comparative study was performed on the effect of the addition of silane coupling agents (SCA), vinyltrimethoxysilane (VTMS) and 3-aminopropyltriethoxysilane (APTES) to a mixture of styrene butadiene rubber SBR1502 with Telinne Monspessulana flour (TMF). SCA was directly added into the mixture using untreated and mercerized TMF. Also, TMF and SBR15
Polímeros. Publicado em: 29/06/2017
-
7. Influence of SEBS-MA and SBS compatibilizers on properties and morphology of blends of polystyrene/rubber residue (SBRr) from the footwear industry
Abstract The reuse of rubber waste is very important today, both to reduce the harmful effects on the environment, and to reduce the cost of new material development. Considering that most of the studies reported in literature refer to the reuse of tire waste, this article aims to evaluate the influence of styrene-butadiene-styrene (SBS) and styrene-(ethylen
REM, Int. Eng. J.. Publicado em: 2017-06
-
8. Avaliação da influência de diferentes óleos extensores com baixo teor de policíclicos aromáticos nas propriedades da borracha à base butadieno e estireno (SBR) / Evaluation of the influence of different extender oils with low content of polycyclic aromatic on the properties of butadiene-styrene based rubber (SBR)
O óleo extensor normalmente empregado em copolímeros à base de butadieno e estireno ( borracha SBR) da série 1712 é o extrato aromático (DAE). Nesta Dissertação, esse óleo foi substituído por óleos com baixos teores de policíclicos aromáticos em formulações de SBR. Esta substituição se deu em atendimento a Regulamentação REACH (EC No1907/2
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 24/02/2011
-
9. Microstructural analysis of carbon nanomaterials produced from pyrolysis/combustion of Styrene-Butadiene-Rubber (SBR)
Styrene-Butadiene-Rubber (SBR) is a synthetic rubber copolymer used to fabricate several products. This study aims to demonstrate the use of SBR as feedstock for carbon nanomaterials (nanofibers and nanotubes) growth, and therefore to establish a novel process for destination of waste products containing SBR. A three stage electrically heated flow reactor wa
Materials Research. Publicado em: 01/11/2011
-
10. The use of thermoplastic rubber type styrene-butadiene-styrene asphalt cements oil / O emprego de borracha termoplástica tipo estireno-butadieno-estireno em cimentos asfálticos de petróleo
Este trabalho apresenta resultados o estudo de pesquisa e desenvolvimento de misturas de polímeros em cimento asfáltico de petróleo. O asfalto é um excelente material aglutinante utilizado na construção de rodovias e vias urbanas, entretanto o aumento do número de veículos comerciais e da carga transportada por eixo tem levado a deteriorização prem
Publicado em: 2010
-
11. The use of styrene-butadiene rubber waste as a potential filler in nitrile rubber: order of addition and size of waste particles
Styrene-butadiene rubber (SBR) has large applications in the shoe industry, especially as expanded sheets used to produce insoles and inner soles. According to TG analysis, the rubber content in SBR residues (SBR-r) was found to be around 26-wt%. Based on that data, a cost-effective technique for the reuse of SBR-r in Nitrile rubber (NBR) was developed. Late
Brazilian Journal of Chemical Engineering. Publicado em: 2009-03
-
12. Desempenho físico-químico e mecânico de concreto de cimento Portland com borracha de estireno-butadieno reciclada de pneus
Physicochemical and mechanical techniques were carried out to characterize three concrete tyre-rubber waste dosages such as 5, 10 and 15%, w/w. The elastomeric material was identified as styrene-butadiene rubber (SBR). It was observed that the growing SBR content in the mixture decreased the concrete performance. The best results were presented by 5% w/w tyr
Química Nova. Publicado em: 2009