Strain Gage
Mostrando 13-22 de 22 artigos, teses e dissertações.
-
13. Analise de tensões em peneiras vibratorias atraves de modelagem numerica utilizando o metodo dos elementos finitos e experimentalmente por extensometria / Stress analysis in vibrating screens by numerical simulation through finite element method and experimentally by strain gagemeasurements
The work presents the results of numerical simulation and strain gage measurements for high capacity vibrating screens. MSC.FEA 2005 software that is an integration of the MSC.Patran and MSC.Nastran softwares was used to get the numerical results of von Mises stress, which is presented in charts and tables formo Strain gages type rosette 45° were used on ex
Publicado em: 2006
-
14. DESENVOLVIMENTO DE UM SISTEMA DE PEDAIS DINAMOMÉTRICOS PARA AVALIAÇÃO BIOMECÂNICA NO CICLISMO / DEVELOPMENT OF A DYNAMOMMETER PEDALS SYSTEM FOR CYCLING BIOMECHANICS EVALUATION
The assessment of pedal forces is one of the more sophisticated methods applied on the sports sciences to accomplish cycling performance tests. With information of pedal forces the pedaling technique is evaluated based on the ability of the cyclists to produce and apply forces on the pedals. Several variables concerning the performance can be monitored with
Publicado em: 2006
-
15. METODOLOGIA E ANÁLISE EXPERIMENTAL DO COMPORTAMENTO GEOTÉCNICO DA ESTRUTURA DE PAVIMENTOS RODOVIÁRIOS
Este trabalho apresenta um estudo da utilização de materiais alternativos para construção da estrutura de pavimentos rodoviários. Sua metodologia envolve a construção de trecho experimental de 300 m de extensão inseridos na rodovia de ligação Itabira - Senhora do Carmo, em Minas Gerais e divididos em seis seções-testes. Foi utilizada uma mistura
Publicado em: 2006
-
16. Desenvolvimento de um sensor capacitivo para o monitoramento de umidade do solo / Development of a capacitive sensor for the monitoring of humidity of the soil
O objetivo do trabalho foi o desenvolvimento de um sensor capacitivo de umidade e a calibraÃÃo do mesmo utilizando o mÃtodo gravimÃtrico e a cÃlula de carga. Para simular um capacitor com caracterÃsticas prÃximas Ãs dos comercialmente vendidos, isolaram-se as placas com verniz bi-componente, do tipo utilizado para isolamento de motores de carro. A is
Publicado em: 2006
-
17. Estudo de gradientes térmicos e deformações em "whitetopping" ultradelgado. / Thermal gradients and deformations in ultra-thin witetopping.
In this work, several factors affecting behavior and performance of ultra-thin whitetopping were evaluated taking advantage of a full scale experimental pavement, restored by applying such technique. Temperatures and thermal gradients in concrete thin slabs were evaluated by almost one year, comprising al the seasons. Load tests were carried out to allow str
Publicado em: 2001
-
18. ELASTIC-PLASTIC HYSTERESIS LOOPS INDUCED BY COMPLEX LOADING / LAÇOS DE HISTERESE ELASTOPLÁSTICOS GERADOS SOB CARREGAMENTO COMPLEXOS
The main objective of this work was to experimentally study the cyclic elastoplastic behavior under complex leading of two structural steels, named API S-135 and AISI 4340. In order to minimize experimental errors, some problems were studied with unusual care. The influence of the residual bending moment on the EN tests was measured, using a special specimen
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 17/01/2000
-
19. Estudo de tensões residuais em policarbonato moldado por injeção
O objetivo deste trabalho é mostrar os resultados encontrados nos estudos de tensão e deformação de amostras de policarbonato (PC) moldadas por injeção. A determinação quantitativa da tensão residual, neste polímero amorfo, era um desafio. Para isto, vários estudos foram conduzidos e algumas técnicas foram utilizadas. Corpos de prova de tração
Publicado em: 1999
-
20. Formulação e implementação experimental de uma estrategia de controle em tempo real para um braço flexivel
One of the most important requirements in robotics is to obtain positioning accuracy in the manipulator s end effector. This problem results even more complex in Flexible manipulators, which present lightweight structure, smaller actuators, higher speed, large working volume, high mobility and the ability to carry heavy payloads. Flexibility effects noticeab
Publicado em: 1997
-
21. AUTOMATED SYSTEM FOR THE READING AND ANALYSIS OF STRUCTURAL MEASUREMENTS (S.A.L.A.M.E. PROJECT) - STUDY OF THE HARDWARE / SISTEMA AUTOMÁTICO DE LEITURA E ANÁLISE DE MEDIDAS ESTRUTURAIS (PROJETO S.A.L.A.M.E) - ESTUDO DO HARDWARE
The Structural Laboratory of the Civil Engineering Departament (EGG) is present involved in designing a system for the automation of the existing system. The system measures and characteristics by moans of interest on a structural model design. Tho transducers, linked to Wheatstone bridges, to induced structurals trains imposed upon the model being studied.
Publicado em: 1967
-
22. Modulation of the heat shock response by one-carbon metabolism in Escherichia coli.
A genetic screen designed to isolate mutants of Escherichia coli W3110 altered in the ability to induce the heat shock response identified a strain unable to induce the heat shock proteins in a rich, defined medium lacking methionine after exposure to 2,4-dinitrophenol. This strain also grew slowly at 28 degrees C and linearly at 42 degrees C in this medium.