Steel Corrosion
Mostrando 1-12 de 441 artigos, teses e dissertações.
-
1. Synergy between Experimental and Theoretical Investigations Reveals the Anti‑Corrosion Efficiency of Imine-Chalcones
The inhibitory action of three imine-chalcones on carbon steel corrosion in HCl was investigated by theoretical and experimental methods. Quantum descriptors were calculated at the conductor-like polarizable continuum model (CPCM)-Becke-3 Parameter-Lee-Yang-Parr (B3LYP)-D3/def2-TZVPP level allowing the prediction of efficiency inhibition ranking. Electrochem
J. Braz. Chem. Soc.. Publicado em: 2021-08
-
2. Aqueous Extract of Cumaru (Dipteryx odorata) Seeds as Corrosion Inhibitor for Mild Steel in Hydrochloric Acid Solution
The corrosion inhibition of mild steel by aqueous extract of cumaru (Dipteryx odorata) seeds and its high molecular weight fraction (HMWF) was investigated in 1 mol L-1 HCl solution. The study was carried out through gravimetric essays, open circuit potential measurements, anodic and cathodic polarization curves and electrochemical impedance analyses, as wel
J. Braz. Chem. Soc.. Publicado em: 2021-02
-
3. Corrosion Protection of Steel by Volatile Corrosion Inhibitors: Vapor Analysis by Gas-Diffusion Microextraction and Mass Loss and Electrochemical Impedance in NaCl Deliquescence Tests
A new methodology using gas-diffusion microextraction (GDME) was developed for the analysis of volatile corrosion inhibitors (VCIs). The evaluation of the inhibition efficiency and corrosion rate (ν) was performed by NaCl deliquescence tests and correlated with measurements of polarization resistance (Rp) obtained from electrochemical impedance spectroscopy
J. Braz. Chem. Soc.. Publicado em: 2020-10
-
4. Changes within the care of hematopoietic cell transplantation patients after the shift of a Mexican institution to a COVID-19-only center
A new methodology using gas-diffusion microextraction (GDME) was developed for the analysis of volatile corrosion inhibitors (VCIs). The evaluation of the inhibition efficiency and corrosion rate (ν) was performed by NaCl deliquescence tests and correlated with measurements of polarization resistance (Rp) obtained from electrochemical impedance spectroscopy
Hematol., Transfus. Cell Ther.. Publicado em: 2020-10
-
5. Aqueous Extracts of the Castor Beans as a Corrosion Inhibitor of Mild Steel in HCl Media
The present work studied aqueous extracts of castor beans as a natural inhibitor of the corrosion of mild steel in 1 M HCl using gravimetric tests, potentiodynamic polarization curves, linear polarization method, electrochemical impedance measurements, surface analysis by scanning electron microscopy (SEM) and chemical characterization by Fourier transform i
J. Braz. Chem. Soc.. Publicado em: 2020-06
-
6. The Comparative Investigation of Corrosion and Passivation for X65 Carbon Steel in pH 1 to 5 HNO3 Solutions without and with 0.01 mol L-1 NaNO2
The influence of 0.01 mol L-1 NaNO2 addition on the corrosion and passivation of X65 carbon steel in pH 1 to 5 HNO3 solutions was investigated and compared by electrochemical methods and microstructural techniques. In the pH 1 to 5 solutions without NaNO2, the X65 steel presented the electrochemical characteristic of active dissolution, and the corrosion rat
J. Braz. Chem. Soc.. Publicado em: 2020-04
-
7. Synthesis of New Phenolic-Schiff Base and Its Application as Antioxidant in Soybean Biodiesel and Corrosion Inhibitor in AISI 1020 Carbon Steel
New Schiff base compound N, N’-bis-(4-hexadecanate)-salicylethylenediamine (named IM) was synthesized, and characterized via infrared and nuclear magnetic ressonance spectroscopies. IM was tested as corrosion inhibitor and antioxidant in soybean biodiesel. Corrosion studies were developed with AISI 1020 carbon steel in a three-step accelerated corrosion as
J. Braz. Chem. Soc.. Publicado em: 2020-03
-
8. Evaluation of Aqueous Coffee Husks Extracts as a Corrosion Inhibitor of 1020 Carbon Steel in 1 mol L-1 HCl Solution
Corrosive processes in acidic medium reduce the performance and durability of metallic materials, causing problems to several industries. Corrosion inhibitors are commonly used to decrease these effects. As these inhibitors must be ecologically friendly currently, this work evaluated the anticorrosive effect of natural extracts of coffee husks (Coffea arabic
Mat. Res.. Publicado em: 09/12/2019
-
9. Characterization and Comparative Analysis of Corrosion Resistance of 4 High Manganese Steels Models in Aqueous Solution of NaCl
The liquefied natural gas volumes that currently need to be stored and/or transported require engineering to consistently develop materials that combine high mechanical strength and low manufacturing costs. The present work brings the study of four models of high manganese steels (non-commercials), to demonstrate the feasibility of being used in the petroche
Mat. Res.. Publicado em: 09/12/2019
-
10. Investigation of Physicochemical Characteristics of Heavy, Medium and Blend Crude Petroleum on Corrosion Resistance of AISI 1020 Carbon Steel
This work investigates the influence of the physicochemical characteristics of heavy (17.5 °API), medium (28.3 °API) and blend (50% heavy + 50% medium) crude petroleum on corrosion of AISI 1020 carbon steel at 25.0 ± 1.0°C. The corrosion resistance of steel was analyzed by electrochemical impedance spectroscopy, potentiodynamic polarization, and scanning
Mat. Res.. Publicado em: 05/12/2019
-
11. Corrosion Resistance of TiO2-ZrO2 Nanocomposite Thin Films Spin Coated on AISI 304 Stainless Steel in 3.5 wt. % NaCl Solution
Utilizing high chromium and nickel content in AISI 304 steel confers its good corrosion resistance. However, the high content of chromium and nickel increases the steel susceptibility to corrosion caused by the high concentration of chlorine. Consequently, the electrochemical and mechanical performance of the steel degrades. In this study, the effect of addi
Mat. Res.. Publicado em: 02/12/2019
-
12. Analysis of Residual Stress by the Hole-Drilling Method and Hardness in Dissimilar Joints of Austenitic Stainless Steel AISI 316L and Inconel 718 Alloy by Autogenous GTAW Process
Stainless steel and nickel alloy have high corrosion resistance in high-temperature environments due to the high Cr content present in their chemical composition, being widely used in components of nuclear reactors, petrochemical industries, etc. Through proper processes and procedures, it becomes possible to join these alloys. However, this union can genera
Mat. Res.. Publicado em: 02/12/2019