Solid Boriding
Mostrando 1-3 de 3 artigos, teses e dissertações.
-
1. Investigation of Adhesion and Tribological Behavior of Borided AISI 310 Stainless Steel
In the present study, the effects of the boriding process on adhesion and tribological properties of AISI 310 steel were investigated. Boriding was performed in a solid medium consisting of Ekabor-II powders at 1123 and 1323K for 2 and 6 h. The boride layer was characterized by optical microscopy, the X-ray diffraction technique and the micro-Vickers hardnes
Matéria (Rio J.). Publicado em: 2016-03
-
2. Corrosion Behavior and Microstructure of Borided Tool Steel
In the present study, the corrosion behaviors of borides formed on cold work tool steel have been investigated in a 4% M HCl acid solution. Boriding was performed in a solid medium consisting of Ekabor-II powders at 850 and 950°C for 6 h. The boride layer was characterized by SEM, EDS, XRD and the hardness tester. XRD analysis of boride layers on the surfac
Matéria (Rio J.). Publicado em: 2015-06
-
3. Estudo do comportamento tribológico do aço AISI H13 submetido a tratamento termoquímico de boretação / Study of tribological behavior of AISI H13 steel subjected to boriding thermochemical treatment
In this work, solid boriding thermochemical treatment was carried out using Ekabor 1-V2 and one blend as boriding agents and heat treatment of quenching and tempering of AISI H13 tool steel in order to compare and evaluate the tribological behavior and the properties acquired for four studied conditions, that were: Ekabor powder boriding, Ekabor powder borid
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 18/06/2012