Soft Switching
Mostrando 1-12 de 26 artigos, teses e dissertações.
-
1. Local piezo-response for lead-free Ba0.9Ca0.1Ti0.9Zr0.1O3 electro-ceramic by switching spectroscopy
The purpose of this work is to determine the effective piezoelectric coefficient (d33) and the macro ferroelectric hysteresis behavior for the Ba0.9Ca0.1Ti0.9Zr0.1O3 (BCZT). The sample was prepared by the modified Pechini method and it was sintered at 1250 ºC for 5 h. The refinements of X-ray diffraction (XRD) patterns obtained by the Rietveld method sugges
Mat. Res.. Publicado em: 11/01/2018
-
2. Análise, desenvolvimento e projeto de um conversor duplo Forward on-off zcs para aplicação em fontes chaveadas isoladas
Um estudo completo de uma topologia, resultante de uma combinação entre duas estruturas Forward, acopladas ao mesmo núcleo magnético de um transformador, e operando como um conversor Full-Bridge, é apresentado. Com o objetivo de reduzir as perdas por chaveamento e a interferência eletromagnética, uma célula de comutação não dissipativa, que fornec
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 10/05/2012
-
3. "Inversor multinível NPC monofásico com comutação suave e grampeamento ativo" / "Single phase ZVS NPC multilevel inverter with active clamping"
Este trabalho apresenta o estudo de um inversor NPC (Neutral Point Clamped) a três níveis com comutação suave ZVS (Zero Voltage Switching) e controle PWM (Pulse Width Modulation), fazendo o uso de uma lógica programável do tipo FPGA (Field Programmable Gate Array) para controle e acionamento das chaves. Inicialmente é feito um estudo qualitativo do in
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 08/12/2011
-
4. Conversores de alto ganho de tensÃo e estÃgio Ãnico aplicados à sistemas de energias renovÃveis com baterias / High voltage gain and single stage converters applied to renewable energies using batteries
Este trabalho tem por objetivo apresentar um novo conceito para a concepÃÃo de conversores para aplicaÃÃes em energias renovÃveis e carregamento de baterias com um nÃmero reduzido de estÃgios de processamento. SÃo desenvolvidas trÃs topologias diferentes de conversores de alto ganho de tensÃo com um Ãnico estÃgio de processamento e capaz de opera
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 26/08/2011
-
5. Conversor boost quadrático pwm associado à célula de auxílio à comutação SR-ZVS-QRC
Este trabalho apresenta um conversor Boost Quadrático PWM associado à célula de auxílio à comutação SR-ZVS-QRC. O conversor proposto possui elevado ganho de tensão, baixas perdas por comutação e interferência eletromagnética (EMI) reduzida, tornando-o apropriado para ser utilizado em células a combustível (H2). Serão apresentadas etapas de ope
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 26/07/2011
-
6. Conversor CC/CA de alta freqüência baseado em inversores ressonantes com comutação seqüencial para excitação de uma tocha indutiva a plasma térmico
This work describes the study, the analysis, the project methodology and the constructive details of a high frequency DC/AC resonant series converter using sequential commutation techniques for the excitation of an inductive coupled thermal plasma torch. The aim of this thesis is to show the new modulation technique potentialities and to present a technologi
Publicado em: 2010
-
7. Structure, morphology and magnetism of an ultra-thin [NiO/CoO]/PtCo bilayer with perpendicular exchange bias
Electronic and magnetic properties of nanoscale materials are closely related to the atomic arrangement at the interface shared by different chemical elements. A very precise knowledge of the surface/interface structure is then essential to properly interpret the new properties coming out. Of a particular interest is the relationship between structure, morph
Brazilian Journal of Physics. Publicado em: 2009-04
-
8. SYNTHESIS METHODOLOGY FOR SIMPLIFIED ZVT TOPOLOGIES APPLIED TO BIDIRECTIONAL PWM POLES / METODOLOGIA DE SÍNTESE DE TOPOLOGIAS ZVT SIMPLIFICADAS APLICADAS A PÓLOS PWM BIDIRECIONAIS
Among the soft-switching techniques, the zero-voltage-transition (ZVT) technique has been accepted well by the industry due its attractive characteristics, such as simplicity, low losses in the auxiliary commutation circuit (ACC), operation with soft-switching for a wide load range, and closest operation to the PWM converter counterpart. In three-phase volta
Publicado em: 2009
-
9. ANÁLISE, MODELAGEM E VALIDAÇÃO EXPERIMENTAL DE UMA METODOLOGIA PARA O PROJETO DO INDUTOR EM CONVERSORES BOOST PFC / ANALYSIS, MODELING AND EXPERIMENTAL VALIDATION OF A DESIGN METHODOLOGY FOR THE INDUCTOR IN PFC BOOST CONVERTERS
This work presents the development of a methodology for design of inductor in singlephase PFC boost converters operating in CCM mode in agreement with international standards IEC 61000-3-2 and CISPR 22. Such converters are used in front-end modules of information technology equipment. This methodology is based on the investigation of the relationship among m
Publicado em: 2009
-
10. Avaliação in vivo da densidade óssea ao redor de implantes osteointegráveis com diferentes plataformas / In vivo assessment of bone density around dental implants with different platforms
In regard of the high successful rates and the excellent outcome, dental implants become the first option in rehabilitation for dental loss. In this way the maintenance of soft peri-implant tissues came up as a new issue to consider especially when esthetic areas are being restored. Generally a bone loss of approximately 1,5 mm occurs after one year of denta
Publicado em: 2009
-
11. INVERSORES ZCZVT COM ACOPLAMENTO MAGNÉTICO: SÍNTESE E ANÁLISE.
This Ph. D. Thesis presents a in deep study of the mechanism of resonant transition soft-switching techniques. By means of the principles that rules the PWM resonant transition converters, a novel tool for analysis and synthesis have been developed. This novel tool also permit to be verified some of the main factors that made possible to he ZVT technique to
Publicado em: 2008
-
12. ANALYSIS AND IMPLEMENTATION OF AN INTEGRATED AUXILIARY COMMUTATION CIRCUIT APPLIED TO AN UNINTERRUPTIBLE POWER SUPPLY / ANÁLISE E IMPLEMENTAÇÃO DE UM CIRCUITO DE AUXÍLIO À COMUTAÇÃO INTEGRADO APLICADO A UMA FONTE ININTERRUPTA DE ENERGIA
Este trabalho propõe um circuito de auxílio à comutação, aplicado a uma fonte ininterrupta de energia de dupla conversão, operando com inversor PWM ponte completa modulado em três níveis de tensão. Para obtenção desse circuito, este trabalho utiliza o conceito de integração de circuitos de auxílio à comutação: O estudo do caso ZVT. O conceit
Publicado em: 2008