Simulations In Engineering
Mostrando 1-12 de 116 artigos, teses e dissertações.
-
1. Análise da implantação de reservatórios de detenção de forma que sejam minimizados os impactos causados por inundações
RESUMO Por causa do avanço da ocupação urbana e consequente impermeabilização dos solos, ocorre um aumento do escoamento superficial, provocando, assim, inundações mais frequentes do que as que existiam quando a superfície era permeável. Este trabalho teve como objetivo propor o uso de reservatório de detenção como técnica compensatória de dren
Eng. Sanit. Ambient.. Publicado em: 20/12/2019
-
2. AN INVESTIGATION OF THE HEAT TRANSFER PERFORMANCE OF DUAL IMPROVED INTERMIG IMPELLERS IN A STIRRED TANK WITH AN INNER HEATING COIL
Abstract The heat transfer process in a stirred tank of diameter T=0.5m equipped with dual-layer improved Intermig impellers and helical coils was investigated by experiment and numerical simulation methods. The temperature field, the temperature boundary layer lateral to the coil and the heat transfer coefficient were measured at different rotational speeds
Braz. J. Chem. Eng.. Publicado em: 09/12/2019
-
3. Influences of the mesh in the CAE simulation for plastic injection molding
Abstract Although computer-aided engineering (CAE) software has been used for many years in the plastic industry, identifying the most appropriate mesh geometry and density remains a challenge. It can affect the accuracy of the simulation, the time and the costs. The evaluation of the most suitable mesh is not easy because the difficulties to obtain the real
Polímeros. Publicado em: 04/11/2019
-
4. DESIGN OF EXPERIMENTS USED IN COMPUTER TRIALS: A SUPPORTIVE METHOD FOR PRODUCT DEVELOPMENT
ABSTRACT The study proposes the development of a framework that can take advantage of the Design and Analysis of Computer Experiments (DACE) more efficiently. The need for rapid product development cycles creates a demand for tools that aid in decision making. One of these tools is Computer Aided Engineering which uses the Finite Element Method that requires
Pesqui. Oper.. Publicado em: 23/09/2019
-
5. An application of Earned Value Management (EVM) with Monte Carlo simulation in engineering project management
Resumo As rápidas alterações no mercado, faz que as empresas, cada vez mais, se orientem através de estruturas de projetos. Assim, um projeto difere de uma atividade rotineira pois é único, sendo gerenciado, e proporcionando benefícios esperados sem custos maiores que o previsto. Logo, deve-se planejá-lo e controlá-lo identificando os desvios entre
Gest. Prod.. Publicado em: 08/08/2019
-
6. Analytical determination of the vibration frequencies and buckling loads of slender reinforced concrete towers
Abstract This study focused on improving the design of slender structures with reinforced concrete (RC) telecommunication towers as the main application. Analytical procedure based on Rayleigh’s method to compute the first natural vibration frequency and the critical buckling load was development. All the nonlinearities present in the system were considere
Lat. Am. j. solids struct.. Publicado em: 27/06/2019
-
7. Uma interface de controle para a Fluidodinâmica Computacional
Resumo Neste artigo apresentaremos uma proposta para a utilização da dinâmica de fluidos computacional sob uma perspectiva educacional, tendo como alvo as disciplinas de mecânica dos fluidos e fenômenos de transporte, nos períodos iniciais de cursos de Engenharia e Física. A importância da utilização da simulação na formação de base é amplamen
Rev. Bras. Ensino Fís.. Publicado em: 27/06/2019
-
8. Investigation of the Roof Presplitting and Rock Mass Filling Approach on Controlling Large Deformations and Coal Bumps in Deep High-Stress Roadways
Abstract Roadway deformation and coal bumps are major challenges for underground engineering. Taking the Lu'an mining district in Shanxi Province as an example, the failure mechanism of deep high-stress roadway was studied. Numerical simulations and the similar material test were performed to investigate the effect of the roof presplitting and rock mass fill
Lat. Am. j. solids struct.. Publicado em: 27/05/2019
-
9. Modeling and Experimental Validation of Two Adjacent Portal Frame Structures Subjected to Vibro-impact
Abstract In many engineering applications, there are systems that exhibit a series of collisions in a certain amount of time, for example the impact of floating ice in ships and the rubbing between stationary and rotary parts in turbomachinery. In many of these situations, it is of vital importance to know how the impacts affect the overall system behavior f
Lat. Am. j. solids struct.. Publicado em: 08/04/2019
-
10. Estimating design hydrographs at the basin scale: from event-based to continuous hydrological simulation
RESUMO Hidrogramas de projeto são amplamente utilizados em engenharia hidrológica. Típicas aplicações adotam métodos baseados em eventos (EB), utilizando modelos chuva-vazão para converter hietogramas de projeto em hidrogramas. Incertezas incluem a definição de condições antecedentes e a premissa de equivalência entre tempos de retorno da chuva
RBRH. Publicado em: 18/02/2019
-
11. A Model Updating Method for Plate Elements Using Particle Swarm Optimization (PSO), Modeling the Boundary Flexibility, Including Uncertainties on Material and Dimensional Properties
Abstract It is a well-known fact that, in a real engineering situation, fixtures are not ideally stiff, so numerical simulations using them are unlikely to present results that are consistent with the experimental ones. The present paper intends to describe a model updating methodology inserting translational and rotational springs in order to better represe
Lat. Am. j. solids struct.. Publicado em: 22/10/2018
-
12. Low Subsonic Wind Tunnel - Design and Construction
ABSTRACT: This paper describes the design and the construction details of a medium size subsonic low-speed wind tunnel, which has been designed to achieve 90 m/s in the working section with expected low intensity turbulence level, making it available for researching in areas such as low speed aerodynamics (flight and terrestrial vehicles), sport activities,
J. Aerosp. Technol. Manag.. Publicado em: 26/02/2018