Shear Stress
Mostrando 1-12 de 435 artigos, teses e dissertações.
-
1. Simulação CFD em rotor de bomba centrifuga com pás intermediárias
RESUMO A proposta deste artigo é apresentar a análise e comparação dos resultados de simulação computacional usando a Dinâmica dos Fluidos Computacional (CFD) em rotores de bomba centrífuga. Três rotores foram simulados: 1) rotor original; 2) rotor original com pás intermediárias na saída; 3) rotor original com pás intermediárias na entrada. O
Rev. bras. eng. agríc. ambient.. Publicado em: 2020-01
-
2. Interfacial bond-slip relationship between Carbon Fiber Reinforced Polymer Plate and Concrete after High Temperature of Asphalt Paving Construction
Abstract The bond-slip relationship of Carbon Fiber Reinforced Polymer (CFRP) plate-concrete after the influence of high temperature action of Stone Mastic Asphalt (SMA) paving was investigated in this article. Two groups of double shear specimens with different bonding length were designed and tested. Based on the test results, the failure modes of specimen
Lat. Am. j. solids struct.. Publicado em: 25/11/2019
-
3. New nonlinear solution of nearly incompressible hyperelastic FGM cylindrical shells with arbitrary variable thickness and non-uniform pressure based on perturbation theory
Abstract In this paper, nonlinear analysis of thick cylindrical shells with arbitrary variable thickness made of hyperelastic FGM with radially variation of material properties in nearly incompressible state under non-uniform pressure loading is presented. Thickness and pressure of the shell vary in axial direction by linear and/or nonlinear functions. The g
Lat. Am. j. solids struct.. Publicado em: 28/10/2019
-
4. Free Vibration of flexible soft-core sandwiches according to layerwise theories differently accounting for the transverse normal deformability
Abstract This study aims to generalize a previously developed accurate and inexpensive 3-D zig-zag theory up to an arbitrary representation form and to determine which simplifications are yet accurate in determining transverse shear and normal stress/deformation effects on vibrations of soft-core sandwiches with not moving middle/neutral plane (pumping). Nat
Lat. Am. j. solids struct.. Publicado em: 28/10/2019
-
5. Evaluation of the stiffening mechanism based on micro-sized particle inclusions in laminated composites
Rigid particles have been incorporated into laminated composites, especially to enhance their bending performance attributed to the stiffening of the matrix phase (i) and the increased interlaminar shear resistance (ii). In order to better evaluate the improvement mechanism provided by the particulate inclusions, this work investigates the incorporation of m
Mat. Res.. Publicado em: 17/10/2019
-
6. The role of bondline thickness on mechanical properties of bio-based polyurethane
ABSTRACT Bio-based adhesives have been largely applied on several applications in many industrial areas, including automotive and laminated food packaging. Polyurethanes (PU) occupy a leading position among the most used bio-based polymers due to their large range of properties and application versatility. Recent works reported that PU obtained from castor o
Matéria (Rio J.). Publicado em: 16/09/2019
-
7. Investigation of the effect of nozzle design on rheological bioprinting properties using computational fluid dynamics
ABSTRACT Bioprinting is the utilization of techniques derived from three-dimensional printing to generate complex biological structures which may replace natural tissues or organs. It employs high spatial resolution deposition of different cell types, growth factors and biomaterials. Those together form bioinks, which are the bioprinting inputs, analogously
Matéria (Rio J.). Publicado em: 16/09/2019
-
8. Seismic Upgrading of Exterior Reinforced Concrete Frame with Small Column and Joint Area Using Externally Attached Steel Column
Abstract This paper presents cyclic load test of five exterior reinforced concrete frames. All the specimens represent a substandard single-span, low-rise reinforced concrete frame building which behaves a weak column-strong beam mechanism under a strong seismic loading. The first three exterior frames M1, M2 and M3 were designed for the joint shear critical
Lat. Am. j. solids struct.. Publicado em: 10/07/2019
-
9. An efficient general curvilinear coordinates finite element method for the linear dynamic study of thickness-independent shells
Abstract yyTo date, a large number of finite element methods have been developed to study the dynamics of shell structures. Most of them are generally based on the degenerated solid approach and other less in shell theories, but introducing, in this last case, some assumptions to analyze this problem: some of them refer to shallow shells (slightly curved she
Lat. Am. j. solids struct.. Publicado em: 27/06/2019
-
10. Influence of Abutment Collar Height and Implant Length on Stress Distribution in Single Crowns
Resumo Este estudo avaliou a influência da altura da porção transmucosa do pilar protético com junção cone morse e do comprimento dos implantes no comportamento biomecânico coroas unitárias com diferentes proporção coroa-implante. Seis modelos virtuais (S11, M11, L11, S13, M13 e L13) foram construídos combinando pilares protéticos com transmucoso
Braz. Dent. J.. Publicado em: 03/06/2019
-
11. A Takagi-Sugeno fuzzy model for predicting the clean rock joints shear strength
Abstract It is well known that learning about the mechanical behavior of a fractured rock mass depends on the shear behavior of its discontinuities. Several studies have shown that the shear behavior of unfilled rock discontinuities depends on their boundary conditions, roughness characteristics and the properties of the joints walls. Currently, there are se
REM, Int. Eng. J.. Publicado em: 2019-06
-
12. Resistência mecânica à adesão em superfícies de madeira de pinus aplainadas e unidas por adesivos PVAc
RESUMO Este trabalho teve como objetivo analisar o desempenho de juntas coladas de madeiras da espécie Pinus elliottii com a utilização de dois adesivos comerciais à base de poliacetato de vinila (PVAc), com diferentes características físicas e composição química, ambos testados nas formas diluída em água e não diluída. As superfícies dos corpo
Matéria (Rio J.). Publicado em: 20/05/2019