Shear Connector
Mostrando 1-12 de 15 artigos, teses e dissertações.
-
1. Composite floor system with CFS trussed beams, concrete slab and innovative shear connectors
Abstract Steel and concrete floor systems are widely applied for buildings and provide excellent structural response, optimized material consumption, reduced beam height, and improved bending strength and stiffness capacity. In recent years, many experimental investigations concerned with new alternatives addressed to efficient interaction between steel and
REM, Int. Eng. J.. Publicado em: 2020-03
-
2. Experimental evaluation on the structural behavior of truss shear connectors in composite steel-concrete beams
Resumo As estruturas mistas apresentam grandes vantagens quanto a aspectos estruturais e construtivos, sendo os conectores de cisalhamento determinantes para a obtenção da interação entre os elementos estruturais e para a distribuição dos esforços na estrutura, aproveitando-se de forma efetiva da potencialidade de cada material constituinte da estrutu
Rev. IBRACON Estrut. Mater.. Publicado em: 11/11/2019
-
3. Plate with holes as shear connector in cold formed steel composite beams
Resumo Buscando compatibilizar as estruturas em perfil formado a frio com os sistemas de piso com pré-laje, foi proposta nesse trabalho uma alternativa de conector de cisalhamento para vigas mistas compostas por perfil formado a frio que visa maximizar a área disponível para apoio das pré-lajes durante o processo construtivo. Trata-se de um conector em c
Rev. IBRACON Estrut. Mater.. Publicado em: 18/07/2019
-
4. Experimental analysis of bolts employed as shear connectors in circular concrete-filled tube columns
Resumo Este estudo apresenta análises experimentais e teóricas do uso de parafusos como conectores de cisalhamento em pilares mistos de aço em seção tubular circular preenchidos com concreto (PMPCs). Os resultados obtidos experimentalmente são comparados com os resultados das formulações propostas pela norma ABNT NBR 16239:2013. Os ensaios são de ci
Rev. IBRACON Estrut. Mater.. Publicado em: 20/05/2019
-
5. Bolted Shear Connectors Performance in Self-Compacting Concrete Integrated with Cold-Formed Steel Section
Abstract In conventional composite construction involving hot-rolled steel section, the composite action is usually achieved by using conventional headed shear studs connectors. However, use of headed studs is not practical for cold-formed steel (CFS) section due to its very thin form that is difficult to weld. A suitable bolt and nut type shear connector wa
Lat. Am. j. solids struct.. Publicado em: 2016-04
-
6. Avaliação númérica de ensaios push-out com conectores de cisalhamento tipo pino e perfobond. / Numerical evaluation of push-out tests with stud and perforbond shear connectors.
Recentemente a utilização de estruturas mistas, aço concreto, vem ganhando espaço nas construções. Isso deve-se principalmente a economia de tempo em sua execução. Além disto, nesta solução a utilização do aço e do concreto otimiza as características estruturais de seus elementos: a resistência a tração do aço e a compressão do concreto.
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 26/08/2011
-
7. Avaliação da eficiência do uso de conectores de cisalhamento no reforço de vigas de concreto armado pela face comprimida / Evaluation of the efficiency of the use of shear connectors in the strengthening of reinforced concrete beams by the compressed face
A structure is designed to have satisfactory performance during its life given the requirements for which it was designed. When performance becomes unsatisfactory, intervention is needed in order to rehabilitate the structure. Structural rehabilitation is characterized by increasing the structure‟s original load bearing capacity. Of the various existin
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 30/06/2011
-
8. Reliability-based evaluation of design guidelines for cold-formed steel-concrete composite beams
This paper presents an analysis of design guidelines for steel-concrete composite beams, formed by concrete-filled cold-formed steel sections. The study is based on experimental results for connector resistance (push-out) and for four full-scale beam bending tests. The accuracy of analytical design equations is evaluated by comparing their predictions with e
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2010-12
-
9. Vigas mistas com laje de concreto e perfis laminados tipo I: análise comparativa do comportamento estrutural entre conectores / Composite beams with reinforced concrete slab and rolled I beam: comparative analysis of the structural behavior of connectors
Among the many structural and building systems, it could be highlighted a system that is a mix of steel-concrete that allows the application of their structural and building advantages as whole. When dealing with metal structures, it was noticed some changes regarding the standards of the involved material due to its lack of availability; such measures do no
Publicado em: 2010
-
10. AVALIAÇÃO DO COMPORTAMENTO ESTRUTURAL DE CONECTORES PERFOBOND E T-PERFOBOND PARA VIGAS MISTAS / ASSESSMENT OF PERFOBOND CONNECTOR BEHAVIOUR FOR COMPOSITE BEAMS
Steel and composite beams have been extensively used in buildings and bridges. The component that assures the shear transfer between the steel profile and the concrete deck, enabling the composite action to develop, is the shear connector. Among the different types of connectors the headed studs, C sections and the Perfobond may be referred. An alternative c
Publicado em: 2009
-
11. CONECTOR DE CISALHAMENTO EM PERFIL FORMADO A FRIO: ANÁLISE VIA MODELAGEM COMPUTACIONAL
Denomina-se sistema misto aço-concreto aquele no qual um perfil de aço (laminado, dobrado ou soldado) trabalha em conjunto com uma laje de concreto, formando uma viga mista. A interação entre o concreto e o perfil de aço pode se dar por meios mecânicos, por atrito, ou, em alguns casos, por simples aderência. Uma das vantagens da utilização de vigas
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 14/09/2006
-
12. CONECTOR DE CISALHAMENTO EM PERFIL FORMADO A FRIO: ANÁLISE VIA MODELAGEM COMPUTACIONAL
In a composite system, a steel beam (laminated, welded or cold formed) is associated with a concrete slab, forming a composite beam. The interaction between concrete and steel can be mechanical, by friction or, in some cases, only by adherence. One of the major advantages of the composite beams is the increase in strength and stiffness due to association of
Publicado em: 2006