Seating
Mostrando 13-24 de 30 artigos, teses e dissertações.
-
13. Evaluation of the use of die spacer over the marginal fit of casting copings of Ni-Cr, Ni-Cr-Be and commercially pure Titanium / Avaliação da adaptação marginal de copings metálicos fundidos em ligas de níquel-cromo, níquel-cromo-berílio e em titânio comercialmente puro em função da aplicação de espaçadores
The purpose of the study was to evaluate the effect of using die spacers on the marginal fit of Ni Cr (Verabond II) (VB II) and Ni-Cr-Be (Verabond) (VB) alloys and commercially pure Titanium (Tritan) (Ti-cp) casting copings by the lost wax technique. Using a metal master die, 135 Resin Added Extra Hard Type IV Stone were obtained for the fabrication of wax p
Publicado em: 2008
-
14. Análise crítica dos produtos de mobilidade sentada - cadeiras de rodas - utilizados por crianças e adolescentes com paralisia cerebral em Natal/RN e outros municípios do Rio Grande do Norte / Critical analysis on mobility seating products, wheechairs, used by children and adolescents diagnosed with cerebral palsy from Natal/RN and other cities in the state of Rio Grande do Norte
Esse trabalho objetivou realizar uma análise crítica dos equipamentos de mobilidade sentada, cadeira de rodas, utilizados por crianças/adolescentes com idade entre 0-18 anos, de Natal/RN e de outros municípios do Estado do Rio Grande do Norte, com diagnóstico de paralisia cerebral, tetraparética, não deambuladoras. O estudo se caracterizou como descri
Publicado em: 2006
-
15. Evaluation of vertical misfit and film thickness of three ceramic systems copings / Avaliação do desajuste vertical e da espessura de película de infra-estruturas de três sistemas cerâmicos
The development of new ceramic systems creates the possibility of choice above the type of restoration one could mean to choose. Thus, benefits from this progress must be appraised on the possibility of unsatisfactory clinical behavior. This work intends to evaluate ceramic copings to the influence of internal adjustment on adaptation, vertical misfit after
Publicado em: 2005
-
16. Avaliação de um programa de treinamento da flexibilidade utilizado para compensação de esforços
The technological innovations have been making part of the program of the companies that you/they look for to perfect his/her production, seeking the technological improvement of their products and services. H oweve r, little it is had done to improve the work conditions, being taken into account the worker s health. The professional diseases, current of the
Publicado em: 2004
-
17. Análise biomecânica da estrutura de cadeiras de madeira
The history of furniture registers the history of mans daily life, it is even correct to say that furniture is the material link between mankind and their houses, body and architecture. However, one of the greatest chair design difficulties is originated from the fact that the act of seating is studied as a static activity rather than a dynamic one. Within a
Publicado em: 2001
-
18. Incidence of Ceramic Liner Malseating in Trident® Acetabular Shell
The low wear rates associated with ceramic hip articulations have made them a popular bearing for younger patients. Although few complications have been observed, one report revealed several instances of incomplete seating of the ceramic liner in the metallic shell. We performed a cohort study of consecutive THAs using a ceramic-ceramic bearing. Radiographic
Springer-Verlag.
-
19. Seating of Ceramic Liners in the Uncemented Trident® Acetabular Shell: Is There Really a Problem?
Concerns have been raised regarding the risk of incomplete seating of metal-backed ceramic liners in the Trident® acetabular system. This prompted us to audit our series of primary and revision THAs. We retrospectively reviewed 68 patients (78 arthroplasties, 55 of which were primary and 23 revisions) using the Trident® acetabular system between 2003 and 2
Springer-Verlag.
-
20. A new hospital library in San Diego: planning and construction.
A new library building at the University of California Medical Center, San Diego provides 7,100 net square feet, seating for 100 readers, and a stack capacity of 23,000 volumes. The building contains three split-level floors with conventional reference and circulation services, a combination of group and single seating, rapid copying machines, audiovisual fa
-
21. Health sciences library building projects, 1996-1997 survey.
Nine building projects are briefly described, including four new libraries, two renovations, and three combined renovations and additions. The libraries range in size from 657 square feet to 136,832 square feet, with seating varying from 14 to 635. Three hospital libraries and four academic health sciences libraries are described in more detail. In each case
-
22. New library buildings. Health Sciences Library, University of Cininnati.
The new Health Sciences Library at the University of Cincinnati Medical Center in Cincinnati, Ohio is described. The library is a self-contained unit within the Medical Sciences Building. The Health Sciences Library contains a total of 90,000 gross square feet, 56,000 of which are assignable. The total project cost was $5,490,000, or $61.00 per square foot.
-
23. Evolution of a veterinary medical library.
Planning a new library and developing a book and journal collection for the College of Veterinary Medicine at Iowa State University are described. The Veterinary Medical Library is a self-contained unit (6,800 square feet) for print material within the Veterinary Medical Building. Seating for 140 patrons is available. The collection is designed to provide ba
-
24. Ergonomics in the electronic library.
New technologies are changing the face of information services and how those services are delivered. Libraries spend a great deal of time planning the hardware and software implementations of electronic information services, but the human factors are often overlooked. Computers and electronic tools have changed the nature of many librarians' daily work, crea